ฝัง
- เผยแพร่เมื่อ 13 ก.ค. 2024
- Are you working on an automotive cylinder head? Doing a valve job? Replacing a head gasket? Are you wondering how much it costs to resurface your cylinder head? Want a good flat cylinder head for cheap? Need an easy way to resurface your cylinder head at home? Dont know what grit sandpaper to use for your DIY cylinder head reconditioning. Here is the helpful auto repair video you've been searching for. InSanely easy Insanely cheap
I strive to find the best deals on the quality products we use. To save you and I time and money. The convenient affiliate links are right here. Does any link not work? Did you find a better deal? Please let me know so I can keep this list updated.
SaneAuto Marketplace -- marketplace/...
12x18 80grit sandpaper -- amzn.to/3qhhJVw
Favorite Tools:
1) Victor Allen Coffee -- amzn.to/3ePjZ2h
2) Black and Decker cordless -- amzn.to/2JPWkiK
3) Easy entry level code scanner -- amzn.to/3pHFMeM
4) Blutooth Scanner OBD2 code reader $20 -- amzn.to/2LdbYYx
5) Milwaukee Fuel Impact wrench -- amzn.to/31tECHI
6) Ryobi cordless ratchet P344 -- amzn.to/338Daxz
7) Great starter socket set -- amzn.to/2A2xLwp
Supplies:
1) Dielectric Grease -- amzn.to/3c9PBM3
2) Antisieze -- amzn.to/3fptAL5
3) Threadlocker Locktight -- amzn.to/3oPUno7
4) Transmission assembly lube -- amzn.to/2Olx0Go
Prius Parts links;
*Battery Fan Screen -- ebay.us/1Z7OIy
*HV battery Blower motor cooling fan -- amzn.to/2MrsDWO
*HV battery blower motor used --- ebay.us/7OweTU
*Upgrade to 12 hole fuel injectors -- Prius amzn.to/3d013Kv
*Dual USB port -- amzn.to/3jwYJjU
*Blue LED USB Charge port -- amzn.to/2KzI7qw
*Prius Console organizer -- amzn.to/36YDX5Z
*Special Prius Filter wrench -- amzn.to/3080p6T
*10mm Allen for drain / Fill plug -- amzn.to/2WcVSC0
*Mobil 1 Engine oil -- amzn.to/2Ja672M
*Filter -- amzn.to/2FRjxi1
*Oil drain plug gasket washer -- amzn.to/334hUrd
*Toyota Prius coolant antifreeze -- amzn.to/2Y2IfSQ
*new factory water Pump HALF of dealer PRICE -- amzn.to/3E9UNjb
*Rain Guards -- amzn.to/2YyQMkt
*Touchscreen stereo prius upgrade -- amzn.to/2K8ROfg
*HV battery Blower motor cooling fan -- amzn.to/2MrsDW
*Hybrid high voltage Battery Bus Bars Updated -- amzn.to/3iog92f
*Filter material -- ebay.us/kpVLfc
Head Gasket set -- amzn.to/3xncuGa
Give to Wounded Warrior Project
support.woundedwarriorproject...
Saneauto page by Victor Sane an ASE Certified Master Auto Technician and also Certified by; GM, ATRA, as a Professional Transmission rebuilder.
Connect with us on:
Business Inquiries: Victorsane67@gmail.com
saneauto.com
Twitter ?lang=en
Facebook ---- / victor.sane.7
Sane Auto Blog --- www.saneauto.blogspot.com
Playlists & other Videos
Tool reviews -- tinyurl.com/y5g4azt6
Auto repair -- tinyurl.com/y5xptphj
Toyota repair -- tinyurl.com/y4loxjlv
Corvette playlist -- tinyurl.com/yx99c25j
Car shows and Classic cars -- tinyurl.com/y3asjujb
Carol Sane Channel -- tinyurl.com/Carolsaneyoutube
“This site contains affiliate links for which I may be compensated” #ad
⚠️ Disclosure: As an Amazon Associate, I earn from qualifying purchases.
I get commissions for purchases made through links in this post.
Disclaimer:
Do not attempt anything you see or here in this video. Serious injury or death may occur. SaneAuto, Victor sane cannot guarantee against improper use or unauthorized modifications of this information. SaneAuto and/or Victor Sane assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. SaneAuto recommends safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not SaneAuto
“This site contains affiliate links for which I may be compensated” #ad
#InSaneFriends #SaneAuto #classiccars - ยานยนต์และพาหนะ
I bet the TH-cam keyboard mechanics go crazy over this content. Used this process on my wife’s car and still going great 8 years later.
Your right!! I get a lot of, lets say "colorful advice". Thanks for watching and commenting.
You just save me about $1k AU to get my head's cleaned up on my car. Worked like a charm. No leaks and happy days. Thanks man
Watched til the end. Thx for the bonus tips
Video and Bonus Material were cool.
Thanks for sharing.
Glad you enjoyed it!
Cool way to use sandpaper like that, really great idea.
RPM good seeing you over here I have to come by and visit by for now your friend Ken.
One of the best videos I,'ve seen cleaning up a cylinder head. I would like to see more bonus material please
Thanks heaps mate - saved me a heap and worked well on 3.2L 5cyl ford ranger
*Thums Up ,8 I'm gonna share this out on Facebook good information thank you for sharing God-bless you bye for now your friend Ken* I had to play this back 3 times...
Much appreciated
nice and simple!
Thanks I really appreciate this video
Mate you are a bloody legend!!!! 🤙
Nice material
Great video! Love it!
bonus!
I appreciate the bonus material
I appreciate the view and comment Thomas. Hope to see ya back here in more video comments.
That's a neat trick with the sandpaper
Dennis, Good to see you over here hope all is well
This does work, I've done it many times and not just aluminum heads cast iron, old good cast iron engines from the 40s. However a head that size you can get resurfaced without even taking it apart for a hundred bucks, maybe hundred and twenty. Also while you have the head off check your block for flatness
Remember when we could take em in and get Valve job, resurfaced, and magni-fluxed (not in that order LOL) for $75 a head? That was awesome. Good advice on checking the block.
Thank you!
You're welcome!
great work thanks sa info
Thanks for watching and commenting
Nice trick with the sandpaper
I used to sand a lot of Motorcycle parts when I was a teenager
Gotta get me some of that magic paper LOL Carrol must love sharing the stove with you 😂 This method works great for small engines.
Stay safe, Joe Z
You are absolutely right Joe I learned it on Motorcycles heads
@@saneauto 👍
You DO NOT WANT CROSS HATCHING on the head or block! Unless you want to do this again in 10k miles. Especially on aluminum heads and block using MLS gaskets.
The cross hatching will eat the head gasket alive. Might as well put the 80 grit sandpaper between the head and the gasket. As the aluminum head expands/contracts at twice the rate of the cast iron. Its constantly eating away at the gasket coating with a rough surface.
The ideal head surface is nearly mirror smooth so the coating on the gasket can actually bond to the head. The inner sheet/sheets between the gaskets are designed for the outer sheets to slide on
Any sanding/grinding mark's should be inline with the expansion/contraction of the head.
? surely the head will expand contract in all directions not just longitudinally. I personally finished off my cylinder head with 400 grit, not super fine but much better than the original manufacturing finish.
If the head gasket is designed to move with the block and head then it isn't really grinding away at the gasket now is it. It is moving with the block like you said.
LOL....I love magic!!! Great how to video.....Watching you working the head reminded me of that stupid workout think that looked like a weight but you shook it. LOL
Yeah Shake-weights LOL "As seen on TV" remeber when people used to watch TV? Now they just watch you and me ;-)
I am working on a 1994 & 1998 Jeep ZJ. I am so going to try this on those head. these are cast iron so with this method work on those heads? Pop a wheeling and the bonus material was a bright idea.
You can also buy a rem piece of granite plate . get something longer and narrower so you can do longer strokes.
I called the shop , I ask them how much they'll charge me .😮 $ 300.00. for that price I can buy a whole engine .
I like to see more bonus material
@ saneauto This is exactly the video I was looking for new subscriber. I’m doing the cylinder heads off my 2002 5.3 LS for my 1988 MCSS and they use MLS head gaskets and the surface needs to be near mirrored, what grit sand paper do you recommend? My cylinder heads are not in bad shape at all basically just needs a light touch up like you did in the video except smooth and almost mirrored
❤tha bonus
This works great with the better head gaskets we have today. Would be questionable with thin steel shim gaskets but who uses those anymore.
Howdie. Im fixn to attempt to sand a block deck while its in the car. Im gonna plug up the oil holes with paper towels. Should i be paranoid about getting grit in the oil gallies? Or do you think the filter will catch amy leftover grit i dont clean?
I bought new heads and there are some minor imperfections on the mirror finish. How should i handle this 3m pad or 400 grit sand paper.
Who wants to see more bonus I want Carol back
So how square is the head thickness from end too end, side to side. And how to straighten cam tunnel that follows the head length. I know , but others won't
*Victor what grit of sand paper are you using? I don't remember hearing you say?*
Forest material is good Percy on The motor rebuild Most definitely thank you for sharing bro
80 grit
Pop a wheelie 😎
Gotta question 🙋🏾♂️
After doing this, is an air hose sufficient enough to clean the debris from the cylinder head before reattaching to engine block? Gonna be picking heads tonight and starting this process bright and early tomorrow morning..
thanks in advance 🫡
I've seen this before, but having another confirmation video never hurts.
Just thinking, would dusting the head with chalk help with seeing the low spots, like spray painters do.
Yes it would. Blue layout ink works as well
The last sandpaper you said you used was 100 grit. Do you go any finer than that?
Where can I get the appropriate size sandpaper I only see my options as 9x11 and the head surface is 7x14, I got the glass.
amzn.to/47R631b
I like that you did a cross hatch but I see the shavings collecting in piles on the paper. A bit of dawn dish soap or what I use, WD-40 helps relocate the shavings away from your work. Nice job by the way.
You are correct about the Dawn and water. I use that when im doing aluminum with wet sand. Unfortunately I can only find dry sandpaper this big. With steel transmission parts I use 8X12 sheets of 3M and other brands of wet sand and old trans fluid over a bucket. I dont reme,ber if I mentioned in the video that I was stopping every so often and brushing off the sandpaper over the trash can. I had to do that about 50 times to keep up with the dry shavings.
@@saneauto check out my video on my page...I did two and that's what led up to me seeing yours.
Yeah you saved $180 and didnt have to drive over there. Nothing wrong with that.
Yeah Cris cross worked a charm in my head's. Showed all the low spots. I also changed grip positions to even out downward pressure. Cats up and going again no leaks
I've been working with 120 grit but it's taking an age. Will get some 80 grit but would like to know if it's necessary to finish with a finer grit?
I know this is an older comment but to anyone looking for an answer to this...
Yes, you want to get the head surface as close to a mirror finish as possible. So finish with 120 grit or higher.
@@KyleNotAKyle I got there in the end and actually finished off with 400 grit in a random pattern. Car has been fixed, back on the road now and running well.
I have done this and my question is when using a straight edge what is the feeler gauge thousandth value I should be shooting for ?
Usually they say 0.002 inch max. warp each 4 cylinders length.
Whats is that called to see the gap
Corner to corner is the way I Sand bondo
Your bondo has corners?
Poppa Wheelie, my grandchildren call me the same thing
Do you keep it at 80? Or finish with higher
That's what I'm wondering too!
Yeah I'm still here watching the fireworks
Because your Awesome!!!!!!!!!!!!!!!!!
Pop a wheelie!!
How is the head currently holding up?
This engine made it to almost 400K miles before it developed a rod knock. I did a tear down video showing the damage and a engine replace/install video. The head and gasket were still fine when I tore the engine down.
Only you knows how to milk the ending😉
American measurement system is not even worth to wipe the butt of metric system, considering how sophisticated the metric system is compared to standard nonsense
Scotty Kilmer already did this video
Did he yell at the camera the whole time? ;-)
@@saneauto I have ptsd from it lol
@Abel Arredondo Musta been one of his early videos when he could really yell and wave around a lot
The sandpaper is too small, take a larger one and make an big 8 figure and that's an old trick from one of my grand uncle
If youve got a link to larger sandpaper, drop it here Im interested.
OLÁ. Sua "Régua de Precisão" é vista com muita frequência na Internet. De precisão nada tem e a forma de utiliza-la também é PARCIALMENTE errada. O aplainar com lixa é função de "artistas" e não de "mecânicos". ABRAÇOS... Roberto Udo Krapf
Pop a wheelie.
Your Awesome
That wasn't magic Carol clean that stove
LOL
Pop a wheelie
Keen observation skills and attention to detail. You sir are destined for greatness!
Anything over 80 grit aint gonna work.
Pop a zit...lol
DO NOT TRY THIS! You will regret it. Just like me...
what happend?? i am about to follow the video of 80 grit... is it too much for sanding?? should i go for 100 grit??? please, let me know. I will break down the engine this weekend.
@@maxprintscreen4972 I had to take away quite alot bc my heads had been corroded from old headgaskets. I had a completely straight surface & concentrated as hard as I could to only move the heads forwards & backwards. Still they got warped.
@@maxprintscreen4972 can you see my reply or did it disappear?