Volvo Penta Fuel Pump Installation and Priming
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- How to Install and prime a Volvo Penta fuel pump taught by Troy Brya from ManCaveMechanic LLC
To have your Volvo Penta fuel pump refurbished by me for $300 + S&H contact me at:
mancavemechanic@gmail.com or at www.ManCaveMechanic.com
These videos have explained so much information that the part sites and mechanics won’t tell you. I’m post this on my fb groups pages! This guy is probably the most helpful and knowledgeable guy on the internet 👍🏼 thank you taking the time to share!!
I highly recommend using the services provided by Troy to remove the paint chips from your fuel pumps. My engine had a low pressure pump issue. My local boat dealer wanted to charge me over $1600 to replace the fuel pumps (low and high). I sent everything to Troy following his step by step instructions. Within a very short time I received the whole assembly back completely cleaned and with new high and low pressure pumps. I installed it and the boat runs great! Troy will reply to to your emails and answer all questions and best of all it was all under $400. Thank you Troy for your service and videos. You really saved me a lot of $$$.
A college professor could not have executed a better verbal lesson. Nice job Troy!
Hey, thank you for the great videos. I am about to change a fuel pump assembly on a 4.3 Volvo penta today. On the electrical connectors you do not have to take metal clip off, but push them in and it makes it so you do not have to pull them out and possibly lose them, like I did so many times. I learned that this week working on my 89 VW Cabriolet. I will be sending you my old fuel pump assembly to rebuild next week. Thank you again for the videos.
I just installed my "mancave mechanic refurbished" fuel pump on my boat. Aside from one of the mounting bolts giving me a bit of a problem the process was exactly as you described. Thanks for the service and the videos!
I want thank you for all of your videos! I used your rebuilt O ring kit. I was able to clean out the paint chips and rebuild the fuel pump. I am charging the batteries now and will let you know how everything works out...Troy your the man!
Thanks for the videos! I got parts from you and did everything you did in your video series. Boat is running good again after sitting for several seasons.
Great info and video... except for the blasting loud music. Yikes. Since I had the volume turned all the way up on my laptop to hear the commentary, it scared my wife sitting across from me at the dinner table the first time a section of music hit. Definitely keep music volume at a minimum when creating these. Thanks.
Thanks brother! Saved us weeks of waiting on a mechanic availability.
Great video! I used your videos for removal, reinstall, pressure testing, and checking and cleaning the pressure regulator. All very informative and spot-on. I couldn’t have done it without these great videos. Thank you!
Great Video Man. I understand now why my boat was stopping and not really working. It's a pity you are so long away from me!!!!
Great series of videos. Thanks for posting. Got me back out onto the water quickly to enjoy what's left of our short Canadian summer. Cheers
Great series of videos to help with the V/P pump issues. I had never seen one of these taken apart before. My old boat (1988 OMC 4.3 V6 4bbl carb) has a mechanical pump (Carter) that I just replaced because I was finding some gas in the yellow safety overflow hose). It lasted 30 years! Thanks, now I know what I might be in for if I upgraded to a newer boat...
I have to say I prefer the mechanical pump and Quadrajet 4bbl carb (very easy to rebuild)
Great vidoes, the electric plugs are much more simple than you describe though. You merely press in the metal bar and then pull the plug apart to remove, and then to install you merely press the plugs together while the metal clip is already installed and it pops into place easily. There is no reason to ever remove the metal clip. Thank you again!
Great video just got my new pump from you so I’m ready to install it next week 👍🏼.
Thanks Troy, an excellrnt series on how to maintain/Prime the Fuel Pump...on the Volvo Penta.
Thanks Troy,for taking the time and effort to post this video.
It is my pleasure. I will have some more out in the up coming weeks relating to this topic and troubleshooting.
My pleasure. Thank you for the feedback. Always appreciated
very helpful thanks but as with all youtube video this would be better without that music. especially at that volume.
It almost gave me a heart attack Jesus
Love video. Blasting music is seriously ridiculous. Please kill that. Great detail on this.
In other news, thanks to your videos I swapped out my bad fuel pump for good and my engine works great now!
I assume it would be a good idea to check and clean the Fuel Pressure Regulator screens while installing a replacement Fuel Pump Assembly. I will do that when installing the new pump assembly I purchased from your website. Clogged screens kept my motor from starting which led me to finding your videos and website. After cleaning the screens, the motor ran ok but I decided to replace the OE pump assembly out of fear of getting stuck on the water. Thanks for the great info and videos.
Great video..I bought a paintless fuel pump from ya.30 min. To install. Runs perfect.back to boating.Ben. Fox Island wash.
Super job. Thanks for providing this service.
Followed the video as I replaced my fuel pump. Everything was explained perfectly. A plus is that you even specified what size every bolt is. Thanks!!
Great video, a suggestion, should always use a fuel line wrench. Brass is soft and I have seen so many of those nuts rounded out because people use a regular open box wrench.
Awesome vid.
Much appreciated and super clear.
Thanks dude!!
The electrical connections are easier to connect an disconnect if you simply push the metal clip rather that remove it.
LOL, I know I was struggling on one of these videos. It went so well in rehearsal.
Thank you for watching. Spring is here and we are back in business. Please see ManCaveMechanic.com for products and services.
After replacing the pump, it is not necessary to bleed fuel system?
Excellent video and really helpful. I was wondering what you used to remove the paint that flakes off. Also, how much would it cost me to send it to you for the rebuild and back? Only other thing to help improve the video, add a little more lighting. Thanks
Great video - just changed mine…
Great job and the music is just fine, I just recently had my boat comply gone though new fuel filter and all fluids. now it want start and says its the fuel pump but yet he never tried to start it but did not tell this or tell me i need to prime the pump after filter was replaced. So i go to lake thinking its ready but it want start. THANKS FOR THE INFO. it ran like a top but did set up for about 9 months. How can i check if fuel pump is ok ?
Great video, thanks for posting. Big help!
Very informative video. Thanks
Thank you for very helpful video. Do I recommend filling the fuel filter before installing?
I have a 2008 Four Winns H220SS 5.7 300GI with a what it seems very common whiny fuel pump, I had my mechanic come out and empty out the gas tank and clear the lines of old gas. When he reinstalled everything he told me the gas pump was shot,done, kaput. Is that the only priming you did or is there additional priming needed if high pressure fuel lines are removed? How much did you pay for that new pump? If you can add a link I would much appreciate one with the no paint inside the pump. Thanks subscribed it was fun watching someone else work on my engine. Also, what do you use to clean your engine bay much cleaner than mine! Thanks for your help.
I have a 2007 Volvo-Penta 5.0 GXI. Why would the engine be slow to accelerate, but ultimately achieve top speed? Any advice would be appreciated. Thx.
Is there a separate fuel regulator on the fuel rail or is that function built in the pump assembly?
Replaced my low pressure and high pressure fuel pumps in my Penta 7.5 (during 12-15knots of wind LOL) Different than this video, the low pressure is up front and easy to access while the high pressure is in the very back of the engine. Finally got it replaced and engine started for a while then choked out. Could this be the shraeder valve? Would I prime (with key) then release air from the valve, several times over? Any other thoughts?
Can you let us know if there’s a difference between a
Volvo Penta TBI & MPI
Fuel pump and how do you test fuel pressure on a TBI which I have.
I purchased a new pump on Amazon and It did not correct my problem.
I get to 2500 rpm and it just Boggs the same as when I had my old Volvo pump in it. No whining from my old or new pump.
A mechanic today said it’s my fuel pump.
I had both the injectors cleaned replaced fuel regulator and cleaned complete throttle body.
The mechanic said he just tested a aftermarket pump it was reading 30 psi but wasn’t delivering 30 psi of fuel.
I’m lost !
No engine codes.
Hi! Could you make a video for IAC valve cleaning and regulation? Thank you
I have the 3 liter Volvo penta with the mechanical fuel pump I've been having issues with it. I wonder if there is a way to mount wire in and get the electrical pump to work properly with the carburetor.
My high presure pump makes noise is that mean is bad how to take it out??
I have 2005 Volvo Penta 5.0 Lt similar to this engine. I have oil leaking hitting belt from this area close to fuel pump. Is there lubrication line attached to pump?
Mine is starting to make the infamous whining sound. I’ve read several reviews on the paint flaking problem.
I noticed you said yours doesn’t have the inner paint and you want have to worry about that problem anymore.
How did you fix that?
Did you buy a rebuilt one ?
Any suggestions for me ?
Thanks for your input and for your video.
Did you fill the filter with fuel before you attached the fuel filter to the fuel cell? This would seem to aid priming. Thanks for the video.
Yes he did. See 11:42 of video.
Great informative video! Music is annoying, too loud and unnecessary.
are you sure about wiring connectors? I think mine are connected the opposite. thx
Hi thanks for your vidéo I have a 5.7 osi I have a loss of power engine has been rebuild in 2020 can you help me ?
Anyone ever use just the low pressure pump and no high pressure pump? My boat is set up that way, its the 5.7 carbureted
So I replaced my fuel pump today. Initially it would start and try to run and then die. Now it will not start at all. I cleaned the filter on the fuel rail as well. I am fairly mechanically inclined, have good tools etc... any thoughts?
Did you figure out how to get your boat running? I am having the same issue of not starting now. Thinking it might be airlocked ?
you can do this with boat in water correct.? thanks
Replaced fuel pump starts after filling the filter & priming, but will not pull fuel from the tank? Any suggestions?
Maybe the fuel tube is blocked. Try attaching a tube from the fuel pump to a gas can to see if it draws. If it does then you may have a problem with your anti-syphon valve
Awesome video, agree lose the music
The house that goes to the intake . What’s that for?
Great video but why the music!!!! LOL
My engine problem RPM Don RPM hai after down hai after down slows you down please my answer
What size oil filter wrench ?
Do you have rebuilt assemblies, for sale
Great video... hate the overly loud music.
My apologies. I will see if my producer (son) can do something about that.
Rightie tightie...leftie lucy!!!
Great video minus the awful guitar music
O
i sent a message to your email.
My apologies if I have not responded. I respond to all questions. Please contact me at ManCaveMechanic@gmail.com.