Ok, followed your video to the letter. Ended up having 4 thin brass washers fall out of somewhere. I don't see a single washer in your video that looks like the ones I have. HELP! I need to know where they go. I don't see them on the schematic either. Hint....they are a size that would fit over the shaft.
@@TSGReelService Well, that's the issue. Evidently they were stuck together with grease and I did not see them fall out. They are brass colored. Also, my clutch washers (schematic says 2 are required) consist of one that is steel colored and VERY thin and one that is brass colored.
@@TSGReelService I followed your video exactly and watched it several times. I even took pictures while disassembling. I did not take the drag apart so they have nothing to do with the drag.
What areas of the can the washers fit on? If they can only fit on the shaft, then double check your pics to see if you can find them and where should possibly go.
Just get a Van Stall (but not the VR). These Spinfishers are decent but do not survive more than a year or 2 for me. My 250 VSB Staal never stops being perfect even though I crank it fully submerged and gets dunked all the time in saltwater.
My apologies.... I mis-read the reel.... thought it was V. The size may still be the same on the VI, but let me double-check and get back to you by tomorrow. Sorry about that.
Appreciated the video content? Want to show some love?
Hit the Thanks button under the video
or hit up my PayPal tip jar:
PayPal.Me/TSGReel
Hello sir can u please tell me the Ar clutch size for btl3 3000
Hi I would like to know is the Penn Spinfisher VI2500 same size as the old Penn Slammer 260? Thanks
Thanks for watching! I don't know. Maybe someone who reads this has this answer.
Hello,how many washers are used in the pinion please ? One or two ?
2
Ok, followed your video to the letter. Ended up having 4 thin brass washers fall out of somewhere. I don't see a single washer in your video that looks like the ones I have. HELP! I need to know where they go. I don't see them on the schematic either. Hint....they are a size that would fit over the shaft.
Thanks for watching, Bill. What exactly you were doing when they fell out and what parts did you remove from the feel before it happened?
@@TSGReelService Well, that's the issue. Evidently they were stuck together with grease and I did not see them fall out. They are brass colored. Also, my clutch washers (schematic says 2 are required) consist of one that is steel colored and VERY thin and one that is brass colored.
@@TSGReelService I followed your video exactly and watched it several times. I even took pictures while disassembling. I did not take the drag apart so they have nothing to do with the drag.
What areas of the can the washers fit on? If they can only fit on the shaft, then double check your pics to see if you can find them and where should possibly go.
@@TSGReelService Maybe these go on the main drive gear before adding the external cap?
Main shaft washer is go under click ratchet, not on top.Its all time on wrong position.
Thanks for watching, Neven. Subscribe and spread the word about the channel.
Just get a Van Stall (but not the VR). These Spinfishers are decent but do not survive more than a year or 2 for me. My 250 VSB Staal never stops being perfect even though I crank it fully submerged and gets dunked all the time in saltwater.
Thanks for watching and your input.
Sir can I ask?
Sir what size of bearing or roller bearing of Penn spin fisher vi 5500 series?
Thank u sir
Thanks for watching! I think it's 5x8x2.5, but I'll double check on Tuesday.
@@TSGReelService okay sir thank you..I will wait to your response.goodbless
No worries. The bearing is 5x9x3
@@TSGReelService sir thank you so much
My apologies.... I mis-read the reel.... thought it was V. The size may still be the same on the VI, but let me double-check and get back to you by tomorrow. Sorry about that.
I’m unable to get the screw at 3:59 out it’s blocked.
Did you strip the head?
@@TSGReelService nevermind I was working on the wrong screw in there. It was covered in grease and I didn’t see it
Adding or subtracting washers underneath the spool will affect how the line lays on the spool ...
Thanks for watching. Yes.... it was tested after to ensure proper line lay.