As a drywall guy I watch alott if painters go over my work. But I’ve been getting better painting. I’ve noticed that the better quality tools you have the better your finish comes out. I flip homes as well. And I’m working on my third hole right now. And I’ve impressed myself as how goood I can cut it now.
Es…just watched another pro recommend the back rolling of cut ins because off the different texture (brush v roller) it can look like a different color at ceiling….
Every painter has their top quality of hand held brushes. You can have the best brush, but I really believe it’s how good you can cut in. I personally use Purdy brushes. This is just my own personal opinion. I’m not criticizing any company, or anyone.
I am Indian house PAINTER. Nicely you paint insight. I am your subscriber. Please make a video of new house painting.in India brick made wall painting culture use to apply. Plus answer
Those are sash brushes, not for cutting walls. they leave gaps. when you use an actual wall brush , which is a flat brush, no angle, you get much more even coverage. You need a very good, 3 or 4 inch brush with fine bristles.
@@AmericanPaintingContractor These brushes are mostly for exterior, they will leave roping, brush lines, use soft brushes. chinex bristles are super easy to clean, they are made for the paints that dry faster.
As a painter, I often click on a video expecting to scoff. But I Cant knock anything in this video. I AM suprised you didn't spin your brush at the end tho. All that said, I don't like Purdy brushes. Good quality yes, but very limp bristles. Lately though, I've been using this little round purdy trim brush for tight spots.
Don’t like angle cut sash brushes. With a twitch of the wrist a square cut can go back without flipping. Purdy no longer seems to stock brush racks with square cut sash brushes. They also discontinued the 4” XL Titan years ago. The only 4” brushes they sell now have sharp square corners on the ferrule which make it uncomfortable to choke up on. Economists are running design not painters. DIYers don’t want to spend money on good brushes or clean them properly
The music is a huge distraction on a tutorial. Guy is using white paint against white trim … yeah ok … we can really see your lines on that one. Make a video of white paint next to woodwork … that’s what I am up against.
![[Full Episode] The Restaurant War Thailand ศึกพ่อค้าซ่าแม่ค้าแซ่บ Episode 4 | 13 ต.ค. 67](http://i.ytimg.com/vi/h8N9tY46P-M/mqdefault.jpg)
![[LIVE] : ONE ลุมพินี : คู่มวยแห่งยุค (11 ตุลาคม 2567)](http://i.ytimg.com/vi/aTc7-tPYuJM/mqdefault.jpg)
As a drywall guy I watch alott if painters go over my work.
But I’ve been getting better painting.
I’ve noticed that the better quality tools you have the better your finish comes out.
I flip homes as well.
And I’m working on my third hole right now.
And I’ve impressed myself as how goood I can cut it now.
That is so satisfying to watch, great job
I mud and paint drywall, but you sir are a very talented professional. Leroy Chavez
Nice.... It's a good idea to use a mini roller to go over the brush lines after you've cut in.
No it's not.
Spoken like an amateur.
@@vonmilash823 yeah. I mean why would you want high quality and consistency? That's just too much when mediocrity is sufficient. Right?
Es…just watched another pro recommend the back rolling of cut ins because off the different texture (brush v roller) it can look like a different color at ceiling….
They do it the best way THAT WORKS FOR THEM, everyone is different.
Y'all should have done this video with a darker wall paint to really show those cut in lines
Every painter has their top quality of hand held brushes. You can have the best brush, but I really believe it’s how good you can cut in. I personally use Purdy brushes. This is just my own personal opinion. I’m not criticizing any company, or anyone.
Awesome job guys
As a painter i rather use a 2 gallon bucket 🪣 and definitely small roller for a better quality cut and a 2 1/2 corona diamond angle brush
As the big question goes.
A lot of painter's would argue paint the trim last.
What would you say if someone asked you the question
Thanks
Not me. Top down far to near!
cool vid
Why is it that just about every contractor says the previous guy was trash and used amateur techniques 😂?
I am Indian house PAINTER. Nicely you paint insight. I am your subscriber. Please make a video of new house painting.in India brick made wall painting culture use to apply. Plus answer
Good work
Cutting in next to the thermostat was clutch. This dude is for real 30+ myself
Those are sash brushes, not for cutting walls. they leave gaps. when you use an actual wall brush , which is a flat brush, no angle, you get much more even coverage. You need a very good, 3 or 4 inch brush with fine bristles.
do these brushes hold as much paint as the purdy pro extras
In his experience, yes... but noted that these clean much easier
@@AmericanPaintingContractor These brushes are mostly for exterior, they will leave roping, brush lines, use soft brushes. chinex bristles are super easy to clean, they are made for the paints that dry faster.
@@sergiocardenas5939 they are made for oil based paints my guy
@@sourbrothers73 wrongggggggggg. Those are not white natural bristles. Look it up.
As a painter, I often click on a video expecting to scoff. But I Cant knock anything in this video.
I AM suprised you didn't spin your brush at the end tho.
All that said, I don't like Purdy brushes. Good quality yes, but very limp bristles. Lately though, I've been using this little round purdy trim brush for tight spots.
Glad you and the employees free hand it. People painting over 5-10 years should have no reason to tape each peace of trim that gets painted.
lol that's hilarious.
Thats an uneducated, broad statement. A _smart_ painter tapes where necessary.
Braaavoooo👍😎
I think I can teach you guys how to cut in better and faster if your interested
Cutting in white trim with white wall pait is a poor choice for a visual effect
Why not use a bucket instead of working out of a paint can ? Much more efficient.
What kind of cut bucket do you like?
Because he is a professional of 25 years lmao
That fast forward looked like he was rolling all the way to the ceiling.
Linning that simple bro make sure ur brush is ok
advertisement for purdy brushes.....
Notice she says she’s in charge of finances !!!! I believe that goes for every business owner with the wife is the finance manager ??? Lol
Not sure I really heard any tips?!?!
Don’t like angle cut sash brushes. With a twitch of the wrist a square cut can go back without flipping. Purdy no longer seems to stock brush racks with square cut sash brushes. They also discontinued the 4” XL Titan years ago. The only 4” brushes they sell now have sharp square corners on the ferrule which make it uncomfortable to choke up on. Economists are running design not painters. DIYers don’t want to spend money on good brushes or clean them properly
Wall paint splatter all over the baseboard. Use tape
After 24 years I'd think you'd be beyond these amateur techniques.
I am a painter please can you employ me, I'm from Nigeria
The music is a huge distraction on a tutorial. Guy is using white paint against white trim … yeah ok … we can really see your lines on that one.
Make a video of white paint next to woodwork … that’s what I am up against.
I was thinking the same thing.
Brushlines aren't razor sharp there is a higher standard .
Corona brushes are way better than purdy
Don't be a Douche to your employees!
Oh Ive been doing it for 25 years.
Your cool!!!
Then you pay your guys like trash and profit all the money.
Sweet