@@Setup_ve I have a 1.45 version fw on my op-com. btw, later than I made this video, I recognized this is not working on early OBD1 cars, like corsa 8v, aftra F 8v or some early models. for your reference.
извините, я не могу. Ключ должен быть сопряжен с иммобилайзером. То, что я сделал в видео, - это спаривание ECU с иммобилайзером. Возможно, вам придется обратиться к дилеру OPEL или удалить иммобилайзер. Спасибо за просмотр моего видео.
I believe you can find it on ebay, or even the car recycle yard. For op-com, you can also find it on ebay. However, there is an alternative way, you can jump wire to pass the imobilizer, if you are runung a c14nz/c14se model. I mean, you don't need immobilizer to start the engine.
Is the Securitycode now the same as it was with the old ECU?
If you want to add a new key for the Car, can you do it with the origin Securitycode?
does this work if you just change the immobiliser and leave the ecu?
I believe it works. Since this function works as sychrome the code between ECU and immobilizer.
is the immobilizer now disable you don't need reprogram original key's?
in this case, we change ECU and keep immobilizer. nothing related to the key.
Can I also delete an airbag fault?
What is the device number? Should I use the device number 1.78 for Opal or 1.99?
I have a 1.99 and it does that. You only need a security code which is on your car pass card
@@vusiematwa1233
Thank you
121/5000
Hello! I'm from Brazil. Everything good? the car worked. Plus the immobilizer lamp was on. What did you do to solve it?
i have same issue engine light stays on, any solution ?
Hi mr. Fu i have Op-com V 1.99 how do i upgrade to 200108 version or send a link or what IC's is yours.... 🤔
Patrick, I personally don't recommend you to flash your OP-com. There is risk if there is something wrong while the flash process.
Hi... I have 96 mercedes benz e320 with same problem, can you help please?
Hello, what version FW of opcom? Thanks.
I have a 201008 version
But fw version of opcom. 1.39, 1.45, 1.65...
@@Setup_ve I have a 1.45 version fw on my op-com. btw, later than I made this video, I recognized this is not working on early OBD1 cars, like corsa 8v, aftra F 8v or some early models. for your reference.
@@TomFu Excellent bro, I have 1.45 too, U hope fix my CIM. Tnks
@@Setup_ve my bro, great job!
Good job Sir
My Op-Com won’t connect to the ECU.
Why?
you need to check the connection first
@@TomFu The hardware connection seems fine.
I also have a bluetooth adapter and I can connect to the adapter but no further.
Use old drivers, windows automatically update it and the new one doesn't work.
Молодец! Я хочу сделать дополнительно (запасной ) ключь к моему Opel Corsa B. Ты можешь помочь?
извините, я не могу. Ключ должен быть сопряжен с иммобилайзером. То, что я сделал в видео, - это спаривание ECU с иммобилайзером. Возможно, вам придется обратиться к дилеру OPEL или удалить иммобилайзер. Спасибо за просмотр моего видео.
А как удалить иммобилайзер @@TomFu
Thank you man thumbs up
Thank you
hope it helps :P
So good, Thanks Bro.
I have a Opel Corsa B, with a lost mobilizer chip.
where can I get a OPCOM?
which version works? v1.59 or v1.99?
where can I get a replacement chip
I believe you can find it on ebay, or even the car recycle yard. For op-com, you can also find it on ebay. However, there is an alternative way, you can jump wire to pass the imobilizer, if you are runung a c14nz/c14se model. I mean, you don't need immobilizer to start the engine.
@@TomFu pls show how to jump the immobilizer
@@cherricobouillon3854 you need cross two blue/red line, the speed signal
How you conect tha tdblet whit obd
we use OP-com interface
Cleffer notes
Visiškas kiaušas
jajajajajajajaj
this is fake??
If I connect the OpCom interface, I‘m getting „Driver not found“.
What is this?
you need to search the device driver from internet, and load it.
Guess what I‘ve tried before asking here.
Any idea where one could download it?
And which driver exactly do I need?@@TomFu