How to program a new key fob - Astra J, Insignia A, Zafira C

แชร์
ฝัง
  • เผยแพร่เมื่อ 11 ต.ค. 2024
  • How to program a new key fob - Astra J, Insignia A, Zafira C.
    In this video we’re gonna show you how to program a brand new key fob in this Vauxhall Astra J.
    This procedure also applies to other Vauxhall cars from similar manufacture years such as the Insignia A or the Zafira C.
    Diagnostic equipment that we use to this job is OP COM. Cheap and its easy to buy it online on websites such as ebay or aliexpress.
    Interested how to do it??
    Stay with us !!
    Cars guide DIY assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Cars guide DIY recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Cars guide DIY, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Cars guide DIY.

ความคิดเห็น • 50

  • @robfiery2207
    @robfiery2207 2 ปีที่แล้ว +5

    Great step by step guide, many thanks all reprogrammed.
    The only annoying thing was being trapped in the car for 10 minutes as it resets if you open the door during the programming time.

    • @TuJestNeo
      @TuJestNeo 9 หลายเดือนก่อน +2

      😂😂😂 I think there is something about it on purpose xd. Like make you sit there because a thief has no spare time to waste get caught lol

  • @EmilAlexandru
    @EmilAlexandru ปีที่แล้ว

    Your guides are so clear and voice is crisp. Thank you for this tutorial. Can you make one on which you can reprogram airbags and bcm into the car? Astra j ? Thanks.

  • @sorincartas3485
    @sorincartas3485 2 ปีที่แล้ว +2

    Many thanks!!!

  • @anwar-dv3mc1fn6i
    @anwar-dv3mc1fn6i ปีที่แล้ว +2

    can i use this methode for opel zafira a 2004 ????

  • @KeshaSandzo
    @KeshaSandzo 2 ปีที่แล้ว +3

    Which version do you use v.?

  • @datemasamune418
    @datemasamune418 ปีที่แล้ว +1

    This guide of programming is valid for Vectra c?

  • @TuJestNeo
    @TuJestNeo 9 หลายเดือนก่อน

    Click yes (tak in my case with Polish windows os)
    Otherwise someone will get confused on dumb silly detail like this lol.
    Straight subscription from me, thanks.

  • @paulMason-zm4kr
    @paulMason-zm4kr หลายเดือนก่อน

    Is this a real version of opcom or a modified version that you use as i installed my opcom cloned and it only went upto 2010 cars
    Different version than yours.
    I need to do my 2012 astra gtc key

  • @sanchopanza1312
    @sanchopanza1312 2 ปีที่แล้ว +2

    very interesting sequence. Close the door / open the door / insert the key. But before that, the program did not say Open the door

  • @OpelpepePower
    @OpelpepePower ปีที่แล้ว

    Congratutations , 💰💰Perfecto..he pasado con tu video de un mando de 2 botones a 4 botones. Apertura maletero y claxon 👍👍👍👍👍

    • @Zefer1no
      @Zefer1no ปีที่แล้ว +1

      Buenas, como as programado los otros 2 butones? Gracias

    • @OpelpepePower
      @OpelpepePower ปีที่แล้ว

      @@Zefer1no he comprado en alliexpress un mando opel nuevo completo con circuito inmobilizador de 4 BOTONES por 7euros , el mio original de 2 botones sigue operativo.
      Debes saber , que todos Los mandos del astra j van a frecuencia de 433MHZ por si lo compras.
      Lo he hecho igual y como ves en el video de este TH-camr inglés.
      Es facil, siguiendo los pasos , pero como ves, necesitas un programa, el OPCOM V 1.70 que también lo tienes EN ALIEXPRESS, vale para más cosas que programar mandos como ver averias coche y borrarlas de casi todos los modelos opel desde 2009 al 2015 , luego tienes que INSTALARLO en un portátil Windows 7.
      Así lo harás la reprogramación.
      Ahora yo abro el maletero SOLO si quiero sin abrir puertas y además tengo claxon a distancia, que como FUNCIÓN DISUASORIA es muy práctica.

    • @Jorge-uc2ku
      @Jorge-uc2ku ปีที่แล้ว +1

      Que version del op-cpm has utilizado?

    • @OpelpepePower
      @OpelpepePower ปีที่แล้ว

      @@Jorge-uc2ku opcom 2014
      También vale opcom 2017

    • @mchr7450
      @mchr7450 หลายเดือนก่อน +1

      Hola valdría una llave de AliExpress con chip?

  • @sara78130
    @sara78130 5 หลายเดือนก่อน

    Hi can use this step when immo. Active car not crank

  • @corneladam4260
    @corneladam4260 5 หลายเดือนก่อน

    Hi, I have a something problem same for my Vauxhall Xenia 2014 1.8 I put the key inside he knows start you can have a solution

  • @miroslavmarsalek243
    @miroslavmarsalek243 9 หลายเดือนก่อน

    Hi, does it also work on the insignia 2.0 cdti 2014?

  • @mila-faithshackleton8157
    @mila-faithshackleton8157 ปีที่แล้ว

    Can i use my laptop for this or do i have to use a certain one

  • @dan_dan89
    @dan_dan89 2 ปีที่แล้ว

    If I buy the keys for my car used from ebay can I cut them after my key and program them to use it on my central locking also ? Or do I need to buy new-unused keys? If I need new keys, where from can I buy them? Thank you

  • @sorenkazam3823
    @sorenkazam3823 2 ปีที่แล้ว +1

    Hello, I have the exact same model, my main key stopped working because the battery ran empty, so i start using the replacement one... a lot of time later, aka today, I finally bought a new key battery, I can turn my engine on, but i can't open/close the doors with the key buttons, what can I do? I tryied what the manual says, like, turn the engine on with the key, or rotate the egnition to the run position while pressing the lock doors button, but nothing happened, what can I do?

    • @Triggas
      @Triggas 2 ปีที่แล้ว

      sounds like a bad battery.

  • @hardend17
    @hardend17 2 ปีที่แล้ว

    I need help, my opel j just went dead buy a new ECU.... but now it dont want to start... I have a blue tooth OBD will this program OP work

  • @al-heramediauk9120
    @al-heramediauk9120 ปีที่แล้ว

    Hi, how can I get the car pass by using opicom?
    My car has this code : B3902 ( incorrect Immobilizer Identifier Received)
    Do you think it is related to key issue?

  • @alunroberts1439
    @alunroberts1439 3 หลายเดือนก่อน

    So if my key is faulty would the immobiliser lock my thob will open and lock the car. I have error 161600 161450 been told all kinds of rubbish

  • @baselmatossian2027
    @baselmatossian2027 2 ปีที่แล้ว

    Thanks man I have Opel Zafira 2012 and I already programed one new key by Delphi but my problem is the remote control dose not work, is there other way to programing the two bottons without that hardware?

    • @olekors
      @olekors 10 หลายเดือนก่อน

      I have the same trouble, even tried in the official service by using the gm MDI scanner but was unsuccess. OP-COM as well can't program Opel Zafira C

  • @mchr7450
    @mchr7450 หลายเดือนก่อน

    Buenas el caso eske ago todo bien pongo la llave nueva nunca programada y hago todo bien con el opcom perp cuando llega la cuebta atras de los 10 seconds se queda a 0 y no ay cuebta atras alguien sabe porke pueder e visto k tiene fallo de inmovilizador en los codigos de errores pero meto la llave vieja y cierro las puertas y abro y funciona

  • @johnf3278
    @johnf3278 3 หลายเดือนก่อน

    And where do you get a good op-com from so many crap ones on ebay

    • @Manuel9x9
      @Manuel9x9 หลายเดือนก่อน

      Can tell you if you still need one .

    • @johnf3278
      @johnf3278 หลายเดือนก่อน

      @@Manuel9x9
      Yes I would like to know. Thanks

  • @andrewwelsh2797
    @andrewwelsh2797 ปีที่แล้ว +2

    do i need to wear gloves for this😅😅😅

  • @element0000
    @element0000 2 ปีที่แล้ว

    Can I do it without Vauxhall pass? Or can I find different way to find code?

    • @alexrusu2905
      @alexrusu2905 2 ปีที่แล้ว +2

      Go to Vauxhall, I paid £30 for a new one. It took me less than a second to program a new key. Spent £4 on a key from Ebay and £10 to get the key cut. Getting a programmed spare would have cost £180 and one that would have only turned the ignition and open the door £75 so I'd say it was worth it

  • @kenwarriner69
    @kenwarriner69 ปีที่แล้ว

    anyone got opcom that can do this and what do they use

  • @jacksong343
    @jacksong343 2 ปีที่แล้ว

    Hey there, what email can I reach you at for business inquiries?

  • @MrRozburn
    @MrRozburn 2 ปีที่แล้ว +1

    Can you run opcom software in windows 10?

    • @alexrusu2905
      @alexrusu2905 2 ปีที่แล้ว +1

      Yes, but it's very complicated to make it work in many cases. The 1.99 version Opcoms are scams and don't work 50% of the time. I bought one from ebay running 1.65 and it worked excelent

    • @robfiery2207
      @robfiery2207 2 ปีที่แล้ว +1

      I got the 1.99 working on x64 version of Windows 10 but you do have to install/update the driver supplied in the program. Check out other tutorials on how to do this.
      I used this You Tube tutorial 'OPCOM Vauxhall 2020 Free Download & Install Guide - Updated USB Drivers'

  • @azaliazhar7176
    @azaliazhar7176 2 ปีที่แล้ว

    How to find the security code

  • @olekors
    @olekors 10 หลายเดือนก่อน

    Using OP-COM on Opel Zafira C is only useful for checking OBD II DTCs; programming is not functional.😠

  • @Junior-mm9wu
    @Junior-mm9wu 2 ปีที่แล้ว

    Paid £85 for this

  • @skinnyniggawidfatbelly7212
    @skinnyniggawidfatbelly7212 ปีที่แล้ว

    Where do you get new key with chip? All i can see online is just the cover with button and uncut key but NO CHIP. also where can i get vauxhall car pass if i dont have it? Thanks

  • @mohammadraiyaan5902
    @mohammadraiyaan5902 2 หลายเดือนก่อน

    Would this work with Astra SE Auto 2011?