Hello! I plan to use this facial recognition in a hallway with high amount of people circulation. Sometimes, pleople will pass in front of the camera and it would be nice to not activate the door opening unintentionally. Is it possible to request a longer period of time to avoid unintended opening of the door while people are passing through? Example: people need to stay 3 seconds in front of the camera to allow the door opening... Thank you! Great video!
Hi! Thank you for sharing your knowledge. The explanation was very helpful! I need to implement a similar solution where only the security personnel can open the door if the person has been authenticated. In other words, the facial recognition device should indicate in iVMS whether the person has been authenticated, but it should NOT open the door. Is this possible? Thank you very much!
@@DVSLTD Thanks dear, but can I know why it was not accepting HID proximity card? Or HID cards are not supported and I have to purchase hikvision cards ?
could you point out roughly the main differences of the model -lines for face-terminals like K1T607/t/p and main feature differneces of the sub-models (what is PMFW = F=Finger,W=Wifi,M=M-Card,E=EM-card,P=Face?, and Waht means comparison-modes?..) ? great thx, toz
Hi , thanks for this. The T model supports 20,000 face, 5,000 fingerprints , 50,000 event , the P version supports 10,000 face , 5,000 fingerprint , 50,000 events, the E variant supports 6,000 faces , 5,000 fingers , 10,000 events. I hope this helps 😊
Hi DVS Ltd, great video, makes me consider to buy a unit. Seems not on sale in europe at the time. i would buy from DVS ltd, but the website says you wont deliver to germany/EU ...really? 😒
@@DVSLTD its a pity. all listed german resellers dont care much about hikvision and more about their own stuff, mostly they own pretty old and odd stuff. their shops are from the first internet days . 🤦♂️ DVS cares importantly with high effort about Hikvision products and DVS has a appaeling modern online-shop. i cannot give you a little benefit for this? also germany is part of the EUR some hungary online-sites offer the module. but i would like to buy from DVS. may someone could ask hikvision for permission to sell there products in EUROPE? Or do they dont want to sell at all? 🤷♀️..a pity.. i will wait for a wonder 🎉
@@DVSLTD tell HIK every big step starts with a small one. one little guy in europe wants to buy at DVS after seeing your video of a brand new product 😉👍, and tell HIK, you are prepared for all EUROPE (or do you want to leave it? ) 🤣🤣 (meanwhile i contacted a german webshop..they check now if they also can deliver...) 😎
I don't have the QR option in my DS-K1TA70MI-T device at the home screen. How do you make it appear so that guests can choose to authenticate with QR code? great vid!
Hello, thanks for the videos and explanations. I have had a problem for two weeks with my access control and my facial recognition reader and imprint. I have a DS-K2602 and a DS-K1T671MFW as a player. I first made an RS485 cabling but without success because my door does not open with the face and not with the imprint of fingers. I tried with wiegand it gives the same result, my door does not open. I need your help . what to choose the RS485 or the Wiegand?
on the Face Rec unit , please add to 4200 and then go to settings and wigand interface, please set this to output not input , and to 37bit from memory , ( not the 26bit one ) , then apply , you may find this setting doesn’t take so on the Face Rec unit then login by pressing the screen and login as admin , then go to interface and wigand and check / set the above, then you should find it will communicate with the ACU on Wigand
Is it possible to setup (minus advanced features) for use with a residence e.g airbnb properties (especially with QR and visitor date ranges) or does it need the ivms-4200?
Hi , should use the IVMS-4200 to do it , but you can do it remotely , if the property has fixed IP external address its much easier , can that work for you?
back to tech-specs: did you dive deeper into the unit? is it possible to have card-only for one person and for the same time (24hrs) for another person face-rec? (means different auth-modes in parallel for different persons) or is there only one auth-mode generally and global for the whole unit? thx..
Hi Sir. Good day to you. I have a question, 1. Can i connect DS-K1T671MF to DS-K2601T? What method of connection do i use? Is it rs485 or weigand output? Let see if i use weigand output, i need pull individual cat6 cable for FR & controller then send config file to controller and FR reader in order to gain access? Thanks in advance
Hi . yes you can connect the Wigand output of the Terminal to the Reader input via Wigand, on the terminal settings locally via the screen under settings you will need to enable the Wigand and make it to send, then set the Wigand to 34Bit , then it will send the data to the ACU panel 😊
Hi Sir! Does it have application (program) from raw swipe direct to DTR? The supplier only oriented us about the raw swipe. But we also need from raw swipe to DTR or the Civil Service Form No. 48. Pls help. Thanks
All the people's faces disappeared from the facial terminal ( it still opens for the correct people, but instead of showing their face it shows a grey box with a question mark in it ) any ideas?
@@DVSLTD don't see any such setting, I went to "Access Control" => Display Authentication Result and checked "Face Picture", but that was enabled by default,, don't see any other items really?
Please can you show how you can make this scanner take snapshots of every person that goes by not necarsarliy employees also must record the persons tempreture with the date and time,thanks
Hi, Can you help please, I've installed this device for a company and they have a problem that the device some times can not detect the face, sometimes in the morning and afternoon, I have changed the setting and checked around to overcome this problem but the problem still their.
@@DVSLTD Hi Sir, Many thanks for the reply, I do not have any problem with the light, even I increased the LED of the device to full, but still the device somtimes have problem of detecting the face.
@@DVSLTD I don't see WDR option in the image option, nothing under the image option I do not know why your options differ from mine it is the same device. Some times the device have the problem of detecting and in the end is showing message that is locked.
Good Day Sir, can I connect this facial recognition dsk1t605mfb to the controller ds-k2601? How? What particular ports to connect? Can I use RS485 for it? Thanks Sir.
Hi , I assume it’s the DS-K1T605MF-B unit? , you can connect this to the network and use as standalone device or connected to software like IVMS-4200 ( Free ) or HIK-Central. That is the suggested method. If you want to connect it to the Hikvision access control unit you can do so by using the Wiegand interface output and connect it this way. The manual link below does show this process if Required Page 16 www.hikvision.com/mtsc/uploads/product/accessory/UD07930B-E_Baselinse_DS-K1T605_Series_Face_Recognition_Terminal_User_Manual_V1.2_20190315.pdf
Hi, thanks for videos as always, i'm the guy that ask you for firmware ANPR plate number which support arabic number, about 30days ago, do you have any update? thanks for helping
Hi, I have chased this and actually R&D have come back saying they cant supply it as its was a past firmware that is outdated and currently they don’t support this region for plate reads, I am very sorry ☹
@@DVSLTD thanks for your reply, i contacted both Hikvision UAE and Hikvision HQ china many times but everytime they pass me to technical guys whom did not respond, before purchasing i check its datasheet which was for 2018 and it was clearly said that support many middle east country including iran! even hikvision in its white paper about ANPR proudly announced that they support arabic plate number :( honestly i am getting upset because of their behavior. they even didn't bother themselves to respond! they just remind me to never ever trust a chinese company no matter how is big. i'm sure if this issue came from a european company they did not act like this, anyway as always thanks for your time and your great video.
Hello, Can i integrate this to an existing biometrics system in that my system reads the clocking data from the gadget/ web client and process it separately?
@@DVSLTD For example, we can run reports on Morning-In, and Morning-Out on daily report and Daily breaks (Lunch-out,Lunch-in) on a seperate report. Can we customize it to have all these reading in just 1 report instead? makes it easier.
Hi sir. Thank you for this tutorials. I would like to ask about the scanning mode. I have the same device that you are using in this tutorials but there is only call and keyboard menu on the device? How can I found the settings on scanning mode. Thank you in advance.
I presume for QR code scanning, have you updated to the latest firmware ? inside the menu option have you enabled QR code option ? under shortcut key and QR code enable
@@DVSLTD hi sir thank you for your response. Yes I already updated to the latest firmware version. I would like to ask where do I find the QR code option so that I can enabled it. Is it on the device or on the software? Thank you again in advance Hope to hear from you soon.
good afternoon, I installed 3 access controls hikvision ds-k1ta70mi-t, it allows access to non-registered users, how can I solve this problem? it assigns the name of a registered user to the stranger
Good day Sir, we just bought 5 units of it purposely for Time and Attendance, can we use the unit to our existing system? how can we fetch the data from the unit in order to connect to our database? Please help us
Sir why is my device not online? I can ping from my pc, i can see the device on the available device list but it is still offline. Its saying parameter error but the username and password is correct.
Sir i would like to know what is default password and i can't login website its saying incorrect password what type password i should use please can you help me ?
My camera recognizes the person, opens the door lock, but doesn't show up the event of recognizing the person. Not even the name of the person with the picture.
Hello! I plan to use this facial recognition in a hallway with high amount of people circulation. Sometimes, pleople will pass in front of the camera and it would be nice to not activate the door opening unintentionally. Is it possible to request a longer period of time to avoid unintended opening of the door while people are passing through? Example: people need to stay 3 seconds in front of the camera to allow the door opening... Thank you! Great video!
Hi!
Thank you for sharing your knowledge. The explanation was very helpful!
I need to implement a similar solution where only the security personnel can open the door if the person has been authenticated. In other words, the facial recognition device should indicate in iVMS whether the person has been authenticated, but it should NOT open the door. Is this possible?
Thank you very much!
Thanks Dave for your video. Very helpful
Can we use it for both facial recognition and also displays one's temperature?
If you use the DS-K1T671TM-3XF or DS-K5604A-3XF/V then yes 😊
Hello .. is the built in card reader requires access control panel in order to read HID Mifare/Proximity cards?
Because I tried to register my normal HID proximity card not like that token you are using, but it's not reading it. Why?
Hi, no it can be utilised within the terminal itself
@@DVSLTD Thanks dear, but can I know why it was not accepting HID proximity card? Or HID cards are not supported and I have to purchase hikvision cards ?
@@yazanalfarra6788 They support mifare 1k prox cards, if your HID is not this standard it wont be read
could you point out roughly the main differences of the model -lines for face-terminals like K1T607/t/p and main feature differneces of the sub-models (what is PMFW = F=Finger,W=Wifi,M=M-Card,E=EM-card,P=Face?, and Waht means comparison-modes?..) ? great thx, toz
Hi , thanks for this. The T model supports 20,000 face, 5,000 fingerprints , 50,000 event , the P version supports 10,000 face , 5,000 fingerprint , 50,000 events, the E variant supports 6,000 faces , 5,000 fingers , 10,000 events. I hope this helps 😊
Hi DVS Ltd, great video, makes me consider to buy a unit. Seems not on sale in europe at the time. i would buy from DVS ltd, but the website says you wont deliver to germany/EU ...really? 😒
Thanks, but correct we are not allowed to sell outside the UK ☹
@@DVSLTD its a pity. all listed german resellers dont care much about hikvision and more about their own stuff, mostly they own pretty old and odd stuff. their shops are from the first internet days . 🤦♂️ DVS cares importantly with high effort about Hikvision products and DVS has a appaeling modern online-shop. i cannot give you a little benefit for this? also germany is part of the EUR some hungary online-sites offer the module. but i would like to buy from DVS. may someone could ask hikvision for permission to sell there products in EUROPE? Or do they dont want to sell at all? 🤷♀️..a pity.. i will wait for a wonder 🎉
@@tozinfo6448 Thank you so much for your kind words! Our agreement with Hik is to exclusively supply the UK. 😳
@@DVSLTD tell HIK every big step starts with a small one. one little guy in europe wants to buy at DVS after seeing your video of a brand new product 😉👍, and tell HIK, you are prepared for all EUROPE (or do you want to leave it? ) 🤣🤣 (meanwhile i contacted a german webshop..they check now if they also can deliver...) 😎
How to connect multiple device with one database? So we just register with one device and can access many devices. Thanks
use 4200 or HIK-Central 😊
I don't have the QR option in my DS-K1TA70MI-T device at the home screen. How do you make it appear so that guests can choose to authenticate with QR code? great vid!
Hello,
thanks for the videos and explanations.
I have had a problem for two weeks with my access control and my facial recognition reader and imprint.
I have a DS-K2602 and a DS-K1T671MFW as a player.
I first made an RS485 cabling but without success because my door does not open with the face and not with the imprint of fingers.
I tried with wiegand it gives the same result, my door does not open. I need your help . what to choose the RS485 or the Wiegand?
on the Face Rec unit , please add to 4200 and then go to settings and wigand interface, please set this to output not input , and to 37bit from memory , ( not the 26bit one ) , then apply , you may find this setting doesn’t take so on the Face Rec unit then login by pressing the screen and login as admin , then go to interface and wigand and check / set the above, then you should find it will communicate with the ACU on Wigand
@@DVSLTD thanks ,for the wiring i take RS458 or WIGAND or the two?
@@aloumoussadiakite2979 just the Wigand 😊
Is it possible to setup (minus advanced features) for use with a residence e.g airbnb properties (especially with QR and visitor date ranges) or does it need the ivms-4200?
Hi , should use the IVMS-4200 to do it , but you can do it remotely , if the property has fixed IP external address its much easier , can that work for you?
What version of IVMS 4200 do you recommend to setting up this kind of devices?
back to tech-specs: did you dive deeper into the unit? is it possible to have card-only for one person and for the same time (24hrs) for another person face-rec? (means different auth-modes in parallel for different persons) or is there only one auth-mode generally and global for the whole unit? thx..
Only 1 authentication mode across the terminal ☹
Hi Sir. Good day to you. I have a question,
1. Can i connect DS-K1T671MF to DS-K2601T? What method of connection do i use? Is it rs485 or weigand output? Let see if i use weigand output, i need pull individual cat6 cable for FR & controller then send config file to controller and FR reader in order to gain access?
Thanks in advance
Hi . yes you can connect the Wigand output of the Terminal to the Reader input via Wigand, on the terminal settings locally via the screen under settings you will need to enable the Wigand and make it to send, then set the Wigand to 34Bit , then it will send the data to the ACU panel 😊
Hello Dave, I have a 10 access door project to start and one intercom in the same building can you give me some help on this please
sir is it posible to link or syncronize 2 facial devices, 1 for registration and 1 used at the building entrance,
Yes it possible using our ivms-4200 software or hik-central software
Hi Sir! Does it have application (program) from raw swipe direct to DTR? The supplier only oriented us about the raw swipe. But we also need from raw swipe to DTR or the Civil Service Form No. 48. Pls help. Thanks
what application are you trying to send to ?
All the people's faces disappeared from the facial terminal ( it still opens for the correct people, but instead of showing their face it shows a grey box with a question mark in it ) any ideas?
Hi , there is a privacy mode on the device which may have been enabled to stop it showing the face , have you checked 😊
@@DVSLTD don't see any such setting, I went to "Access Control" => Display Authentication Result and checked "Face Picture", but that was enabled by default,, don't see any other items really?
hi, what kind of locking mechanism will this work with?
Hi, it’s a relay output so just about anything you can control via a relay to be honest
Hi im struggling to activate the device on ivms 4200 as the activate button is greyed out and wont allow me to click it, any ideas what iv missed out?
Please can you show how you can make this scanner take snapshots of every person that goes by not necarsarliy employees also must record the persons tempreture with the date and time,thanks
Hi,
Can you help please, I've installed this device for a company and they have a problem that the device some times can not detect the face, sometimes in the morning and afternoon, I have changed the setting and checked around to overcome this problem but the problem still their.
is there an issue with it being low light ??? have you turned WDR on , under the image settings on the web browser of the device??
@@DVSLTD
Hi Sir,
Many thanks for the reply, I do not have any problem with the light, even I increased the LED of the device to full, but still the device somtimes have problem of detecting the face.
@@DVSLTD I don't see WDR option in the image option, nothing under the image option I do not know why your options differ from mine it is the same device.
Some times the device have the problem of detecting and in the end is showing message that is locked.
@@dyarmzere3469 its hard to give more accurate advice without looking at it remotely, what region are you in??
Hey Dave, how can you set up a DS-K1T671MF so the white lights glows when someone approaches for clocking in or out?
Good Day Sir, can I connect this facial recognition dsk1t605mfb to the controller ds-k2601? How? What particular ports to connect? Can I use RS485 for it?
Thanks Sir.
Hi , I assume it’s the DS-K1T605MF-B unit? , you can connect this to the network and use as standalone device or connected to software like IVMS-4200 ( Free ) or HIK-Central. That is the suggested method. If you want to connect it to the Hikvision access control unit you can do so by using the Wiegand interface output and connect it this way. The manual link below does show this process if Required Page 16
www.hikvision.com/mtsc/uploads/product/accessory/UD07930B-E_Baselinse_DS-K1T605_Series_Face_Recognition_Terminal_User_Manual_V1.2_20190315.pdf
Can you use Facial Rec (without access control cards) to trigger the on board relays on the door station?
yes
Hi, thanks for videos as always,
i'm the guy that ask you for firmware ANPR plate number which support arabic number, about 30days ago, do you have any update?
thanks for helping
Hi and thanks , I have asked for it , let me chase again but HQ are on National holiday this week
@@DVSLTD thanks
Hi, I have chased this and actually R&D have come back saying they cant supply it as its was a past firmware that is outdated and currently they don’t support this region for plate reads, I am very sorry ☹
@@DVSLTD thanks for your reply,
i contacted both Hikvision UAE and Hikvision HQ china many times but everytime they pass me to technical guys whom did not respond, before purchasing i check its datasheet which was for 2018 and it was clearly said that support many middle east country including iran! even hikvision in its white paper about ANPR proudly announced that they support arabic plate number :(
honestly i am getting upset because of their behavior. they even didn't bother themselves to respond! they just remind me to never ever trust a chinese company no matter how is big.
i'm sure if this issue came from a european company they did not act like this, anyway as always thanks for your time and your great video.
Hello, Can i integrate this to an existing biometrics system in that my system reads the clocking data from the gadget/ web client and process it separately?
Hi , we can output the data in Wigand format if this is supported by your system then yes
Sir, Can I make the terminal not to scan the same face? Just one-time in one-time out.
How can you customize your own report format on it?
Hi , what do you want to custom on it out of interest?
@@DVSLTD For example, we can run reports on Morning-In, and Morning-Out on daily report and Daily breaks (Lunch-out,Lunch-in) on a seperate report. Can we customize it to have all these reading in just 1 report instead? makes it easier.
Is there any way to use HikConnect (on mobile) to response intercom and open door instead of ivms on pc?
Hi sir. Thank you for this tutorials. I would like to ask about the scanning mode. I have the same device that you are using in this tutorials but there is only call and keyboard menu on the device? How can I found the settings on scanning mode. Thank you in advance.
I presume for QR code scanning, have you updated to the latest firmware ? inside the menu option have you enabled QR code option ? under shortcut key and QR code enable
@@DVSLTD hi sir thank you for your response. Yes I already updated to the latest firmware version. I would like to ask where do I find the QR code option so that I can enabled it. Is it on the device or on the software? Thank you again in advance Hope to hear from you soon.
can i dowload the records from asistance in excel?
You can download to excel yes
thanks brother for video
Thank you 😊
good afternoon, I installed 3 access controls hikvision ds-k1ta70mi-t, it allows access to non-registered users, how can I solve this problem? it assigns the name of a registered user to the stranger
Hello, can i use data base photo in model DSK1T60TE, sorry my english is not good
can I send attendance data to my server? without using any computer as a medium. I want the unit to send data on my web application. is it possible?
Grate Video
Thank you
very goood
Thank you
Good day Sir, we just bought 5 units of it purposely for Time and Attendance, can we use the unit to our existing system? how can we fetch the data from the unit in order to connect to our database? Please help us
Hi Eric. I can help you on this. Let's talk and see if we fit. It's +63917 543 4362. Thanks
Good day Sir, how to clear events on device? I can not find menu for do that.
Can you integrate this with Lenel access control system?
Sir why is my device not online?
I can ping from my pc, i can see the device on the available device list but it is still offline. Its saying parameter error but the username and password is correct.
Cooool
Thank you
I'm technical support in uae
@@techclub3953 Nice!
Sir i would like to know what is default password and i can't login website its saying incorrect password what type password i should use please can you help me ?
My camera recognizes the person, opens the door lock, but doesn't show up the event of recognizing the person. Not even the name of the person with the picture.
Video quality is very bad, it's not possible to see clearly the text on the screens
How to reset forget password