ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
BRAKE LIGHTS STAY ON, HOW TO FIX IT EASILY! MUST WATCH!
ฝัง
- เผยแพร่เมื่อ 15 ก.ค. 2021
- Brake lights stay on or brake lights won't turn off? Here's how you fix this annoying issue. Luckily this diy is very easy and straight forward. The reason why the brake lights on your vehicle stay on and won't turn off is usually because of a broken brake light switch grommet also commonly referred to as a brake pedal stopper or brake pedal grommet. In this video I show you how to fix it easily. Get a new brake light switch grommet from your dealership or local auto parts store, climb under your dash, pop it back into place and your problem should be solved unless there is another issue causing your brake lights to stay on which can be a bit more complicated. When a brake light switch grommet gets old, it usually breaks and causes the brake lights on your vehicle to stay on and not turn off because the brake light switch no longer has the grommet to make contact with in order to signal the brake lights to turn off.
Every time that you step on the brakes, the grommet and pedal move away from the brake light switch which triggers the brake lights to turn on and stay on until you release the brake pedal. Once the brake pedal is released, the brake lights turn off once the brake pedal springs back to it's resting position allowing the brake light switch to make contact with the brake light switch grommet.
A broken brake light switch grommet can also lead to a dead battery as many drivers may not notice when their brake light switch grommet has broken. The reason why this issue may cause a dead battery is that once the vehicle is turned off, the brake lights stay on, causing a draw from the battery without any resource to recharge it. One tell tale sign that your brake light switch grommet has broken, other than your brake lights staying on and not turning off, is any sign of small plastic or rubber debris on the floorboard or floor mat of the driver side of your vehicle.
Among a dead battery, a bad brake light switch and grommet may cause other issues. One other issue that a bad brake light switch grommet may present is the potential risk of getting rear ended. This issue not only poses a danger to you but it poses a danger other drivers on the road as well. This is because once the brake lights stay on, other drivers behind you might not be able to differentiate when you are applying the brakes or not which can pose a huge danger. Therefore, I would recommend fixing this issue as soon as possible.
Luckily, as I said before, usually this issue requires minimal effort or expense to fix.
As always I hope that this video helps someone, if it did then like this video, share it with your friends, and subscribe to the channel!
Thank you for watching! Till I see you next time, peace!
Follow me on Instagram: instagram.com/scubah_/
Worked like a charm, thanks so much! No shops are open tonight, so I stuck a couple coins in there to keep the lights off til morning. It already killed my battery last night when I didn’t catch the lights staying on, then I wasn’t going to be able to take it in until tomorrow after jumping it-this video made my night.
I’m super glad that it helped! 💯 Great thinking with the coin trick. That’s a super innovative solution! Best of luck and I hope you enjoy the rest of your night!
My man doin the lords work, Thank you. Brake lights work and now my mom thinks im a mechanic 🙏
Glad it helped! That’s the mission! Lol technically you are a mechanic now because you fixed that with ease! 🤣🤙🏾💯
After watching this last ditch video I found the remains of my original grommet on my carpet. Saved my life,,cost
That’s awesome! The easy fixes are the best! Glad it helped! 💯🤙🏾
Thank you bro, youre a huge help. I was busy messing with fused and all sorts of stuff before I watched this vid. Then once I did I immediately found the remains of my broken grommet.
@@BigBen_64 Glad it helped man! You were on the right track for sure troubleshooting the issue, but glad it turned out to be an easier fix! 💯🤙🏾🫡 New grommet and you’ll be as good as new!
Perfect! I saw a weird little rubber thing on the floormat and the brake lights stayed on. You answered my questions perfectly.
Great! I’m glad you found this video and I’m glad it helped! 💯💪🏾
This is the most useful video since I started driving. It worked like magic. Thanks for helping me save some dollars 😍
@@louis_coffie I’m glad to hear that and I’m glad it helped! 🤙🏾💯
You bloody saved me dude. 1000 blessings on you and your family
Glad it helped! Much appreciated! 💯
Whooo hoooo!!! That’s awesome!!! Thanks for sharing!!❤
@@user-vy3ke9pw4w I completely missed this! Glad it helped! 😎💯
Scubah, you're my hero! After watching your simple video fix I think no way is this going to be so easy. After charging my battery this morning (thank goodness this happened on a weekend) I go out, look under the brake pedal of my 2003 Outback and was thrilled to behold little broken chunks of plastic on the floor mat exactly like in your video! You saved my bacon and a bunch of time fraught with worry and frustration!!! Thanks so much for this expertly well done video, and...Keep on keep'n on!
I’m glad it helped and I’m happy to hear that it was an easy fix! Those are always the best! 💯 thank you for your kind words as well! 😎
Thank you for this video brother. I saw plastic pieces on the floor in my Honda. The grommet did indeed break. I’m going to replace it. 👍
Glad it helped! And glad it’s an easy fix, those are the best! 😎🤙🏾
I have to come back here and thank you…you’re a life saver…my battery ran down overnight due to the brake light on throughout the night…had to get a booster to get the battery on…I just googled what might be wrong and came across this video…just got the universal grommet from Canadian Tire and I fixed it back myself
@@yusufoyekanmi4267 I’m glad to hear that it was an easy fix! And I’m glad Google sent you here! Cheers to getting back on the road! 💯🤙🏾
Bro I was about to sell my car afraid that it was an electrical issue, and I've fixed it thanks to you. So thank you brotha.
I’m glad I was able to help bro! 💯💪🏾
Your explanation saved me some dollars now. I want to say thank you.
Glad it helped! That’s the mission and you are most welcome! 💯🤙🏾
Fantastic video 2 years later still helping ppl ❤️🙏🏽
I appreciate your kind words! And I’m grateful that this tutorial is consistently helping others! 🤙🏾🫡💯
Thank you so much. Saved me a repair bill!
You’re welcome! I’m glad it helped and saved you money! 💵 The easy fixes are always the best. 😎
God bless you much I'm sooo grateful I found your video, my daughter had the problem with the brake lights staying on we watch your video and had it fixed in no time...bless you and you channel
Many thanks from Lares Puerto Rico
Glad it helped! 💯 and I’m glad it was an easy fix! I love Puerto Rico, a beautiful island with rich culture! 😎🌴
OMG! You are awesome. After saw ur video, run to my car, I found this little piece on the mat, then I saw the hole where the piece should go. Tomorrow I will buy it. You saved me a trip to my mechanic. Easy explanation and easy to fix .
Awesome! Thank you! I appreciate the kind words! I’m glad it helped! Those easy fixes are always the best 💯🤙🏾
Can I second this?! I’m a caretaker for my husband who has Alzheimers. We’re living off our SS so I can take care of him. Money is really limited! After watching your video, I looked on the mat and sure enough there were 2 pieces and when I pressed the break the other piece fell. I’ll go tomorrow to get the piece but not until my husband asks me about it 500 times 😅. I’m grateful beyond belief that I don’t have to pay a mechanic $100 to fix it! Thank you thank you thank you!!!
Watched the video. Bought the part, same day delivery on Amazon, installed it in a tropical storm. Got it working.
Nice! Quick thinking with the Amazon delivery! Sounds like you’re in FL with the tropical storm 😂
Oh my gosh, like when I watch the video, I'm like it can't be that simple but what the hell I'm gonna go look at my floorboard 'cause I have the same problem. My floorboard has trash on it, so I looked at the brake pedal and long story short you were totally right, which I know you must get that constantly, but I even found the piece on the floorboard! so crazy.
@@helenzass411 Glad it helped! 💯🤙🏾 the easy fixes are always the best. Now you just have to pop in a new grommet and you’ll be as good as new. Cheers!
Thank you!
You saved me taking my car in for repair, saved me from having to rent a car, and so knows how much money!
I’m glad it helped! Glad it was an easy fix and you didn’t have to do all that! That’s awesome! 💯🤙🏾
Thank you for your help! I went and bought the grommet and it worked! 😊
Perfect! Glad it was an easy fix! 💪🏾💯
This Video Saved Me Cause My Mother’s Brake Lights Wouldn’t Turn Off Even When The Car Was Off🙏🏾
Yup! Sounds like the brake light switch is the culprit! Really easy fix, and I’m glad it helped you solve the issue! 🤙🏾💯
This worked for me on my landcruiser. Exact same problem, and same debris on the floor mat. Thanks!!! Now I just need to get a replacement grommet.
Anytime! Yup the debris is a tell tale sign of a broken grommet! Glad it helped! 💯🤙🏾
You ROCK. I literally had grommet bits on my floorboard! Thank you so much!
You’re welcome! Glad it helped! 💯
and i almost took it to the shop. Gromet is in pieces on the floor. Appreciate the info!
Glad it helped and saved you a trip! Awesome to hear! Should be an easy fix and you’ll be on your way! 💯🤙🏾
Worked on my wife's 2006 Toyota Camry. The switch is difficult to find, as it's tucked behind a spring and has metal brackets to either side, but a penny with some double sided duct tape was enough to solve the issue until I can track down a grommet. Thanks for the video, very much appreciated!
Glad it helped! The penny trick is a really creative fix in the meantime! Awesome way to improvise! 💯🤙🏾
Thank you for this , it just rained and I work nights so I thought maybe a leak happened somewhere and it was electrical. As soon as you point out checking the floor I found the rubber piece broken. Had me stressing over what it could of been after checking forums .
Glad it helped! I think it’s natural to think the worst whenever it comes to car issues, especially after experiencing rain but I’m glad to hear it was a simple fix! That broken rubber grommet is always a tell tale sign! 💯
I almost never post comments but duuuuude you just save me a headache and probably a lot of money in the shop(my mechanic guy is a snake)
Thank you so much
Glad it helped man! Most definitely and saving money is always a good thing! 🤙🏾💯😎
Omg!!!!!!❤❤❤❤ i could hug u right now i was so stressed up about the issue .i was counting how much money i will use until i watched this video n i just fixed it 🙌🙌🙌🙌yaaay ! I feel soooo good ...may God bless you abdntly iam subscribing asap😂❤
Thank you so much for your kind words! Honestly I’m glad i could help and I’m glad it was an easy fix! Those are always the best 😁 God bless! 🙏🏾
Ahhhh!! You rock! I know this is the issue w/ the Honda. Too bad all the auto parts stores are closed presently, but I'll be there 1st thing in the morning (prayers my car starts....can't disengage the battery cables, too tight for this gal! It's just not my day, but tomorrow will be! Thanks for your insight. Peace!
Glad it helped! I know sometimes those battery cables can be a pain to get off. In the event that it doesn’t start, you can try to jump start it with another car and some cables or a battery pack which is a great tool to have handy! I love your optimism and positive outlook! Hope this helps! Best of luck! 💯
Hey man! Bless you!! Saved me a lot of headaches!
Glad it helped! 💯 Thank you!
GREAT video boss.. thank you so much.. very well done, informative .. thanks again
Anytime brotha! Glad it helped! 💯
Thanks to this video I figured out why my brake lights was staying on. 2009 Infiniti fx35.
Glad it helped! 💯 The easy fixes are the best! 🤙🏾 that’s a nice SUV you got there. I love the exhaust note on the FX35.
@@Scubah thank you!
Thanks-you saved me some time and a mechanic bill!
Much respect 🫡 thank you! Honestly glad it helped! That’s the mission 💪🏾
Great content sir, thanks for sharing, it's a big help for me, watching from Manila, Philippines.
Awesome! Thanks for watching and I’m glad it helped! 💯
Yep. One brake light on 1995 Integra was stuck ON. As described, I found two broken plastic pieces on the driver's floor. I will get replacement part. Perhaps, one brake light is also out, since both brake lights were not stuck ON. I'd just moved the car 15 hours earlier, likely when plastic fell out, draining the battery to point car would not start, but brake light stuck ON. Disconnected negative terminal for now! THANKS!!! Seems like eventually ALL old Integra switches will age and break!
Absolutely! It sounds like one brake light itself may have been out prior to the brake light switch grommet breaking apart. Most definitely a common issue when cars get start to age. You’ve got it! Great diagnosing! 💯
Brooo u saved my battery’s life thank you so muchh its 11pm at night, none of those shops are still operating. I ended up using paper to temporarily hold the spot first until i take the car to fix on tmr.
That’s a pretty innovative solution you used to fix it! Best of luck and glad I could help! 💯💪🏾
This is so helpful!!! Now if i could just find the grommet instore so i dont have to disconnect my battery when i park🥲
Glad it helped! Check with your local auto parts store like O’Reilly, or Advance Auto Parts. They may have something that works. As a short term solution until you are able to get the grommet, you could put a small bolt and nut in place of the grommet just so that it makes contact with the switch and turns the brake lights off. Hope this helps! 💯
Scuba! Thank you so much for sharing! You saved me!!!!!!
Anytime! Glad it helped Meena! 💯
Thanks for this video you explained it well, my neighbor has this problem, now I know what to look for, it works opposite of what I thought, thanks
Thank you for your kind words! Much appreciated and I’m glad it helped! 💯🤙🏾
you save me time and money. just want to say thanks
That's what I like to hear! Glad it helped! 💯
Good shit man! My motor blower and motor resistor just went bad and I had these guys fix it but the problem with my car is I got a Nissan versa and you gotta go up under the driver side and remove the pedals and stuff to do that well they damage my grommet and thanks for your video. I found that out. Thanks a lot man I thought I was gonna spend hundred dollars but I’m only gonna spend a few bucks. That’s cool.
Hey! Thank you for your kind words! Glad it helped and saved you money 💵. Sounds like you had quite a journey with the Versa but I’m glad that journey guided you to this video which led you to an easy fix! Cheers!
Thanks a lot this video has just saved me today.❤❤❤
Anytime! I’m glad it helped! 💯🤙🏾
Uuh this was my simple answer went to parts store and Walla! Thanks!
The simple fixes are always the best! Glad it helped! 💯🤙🏾
Perfect video, thanks king.
Blessings 🙏🏾 Glad it helped! 💯
Wow. Much thanks on a Monday night in the rain.
I could only imagine! Glad it helped though! 💯🤙🏾
just had to replace this thing on my 05. thx for the vid
Anytime! Glad it helped! 💯
Thanks for the video, saved me today
Nice! Glad it helped brotha! 💯
Great job. You delivered your stuff well.
I appreciate that, and I sincerely hoped it helped! 💯🤙🏾
It is good knowledge to know. Now when I see cars with their brake light on I know what might be wrong. That Honda is sweet too. And on a bright yellow/orange it rules. Take care.
@@Edwinovoine Absolutely, I can’t tell you how many times I’ve seen cars driving around with the brake lights stuck on and I immediately go ahah 💡 I know what’s wrong. Of course it also poses a danger to the other drivers since they can’t tell if that car is braking or not so I always try to switch lanes to avoid that.
Yeah I love the S2000! Hopefully I’ll bring it back on the channel soon 🤞
Thanks heaps dude saved me. I was up in the mountains and this happened in the middle of the night. The broken pieces were right there like you said
I’m glad it helped! That’s the worst when something breaks in the middle of the night, but on a positive note I’m glad it was an easy fix! 💯
@@Scubah it was. Just held it in place with a bit of tape for now. I'll replace it first thing once I reach town. Thanks again!
@@brainstew8922 that’s some innovative thinking using the tape💡 best of luck! 😎
I tried to just pull brake light fuse but something else is draining battery so thanks for tip to disconnect battery altogether
Most definitely! Glad it helped and I’m glad the process of elimination worked in this case. The easy fixes are always the best! 💯💪🏾
You’re amazing!!! Thank you so much, this really helped me just now
Glad it helped! And glad it’s an easy fix! 💯🤙🏾
OMG your the best you saved me from spending big money❤️
So glad it helped and saved you money! The easy fixes are the best! 💯💪🏾
Saved me a battery. Repair will have to wait till I’m done being sick but I was able ti have a temporary solution
Glad it helped! Feel better as well! 💯
Thanks for the video, last week was the clutch switch and today the brake switch............
No problem! Glad it helped 💯
Lol yeah that’s the way it usually goes. My neutral safety switch grommet broke, then a few months later, my brake light switch grommet fell apart. Lol like clockwork ⏰
Thx for the video! Problem solved!
Anytime! Glad it helped! That's what it's all about
Thanks for your help bro! 👌
Glad it helped bro! 💯🤙🏾
awesome very good video, and very good explanation thanks a lot !
Thank you! Glad it helped!!!! 🤙🏾💯
your the goat you fixed my problem for me bro
I’m glad it helped! 💯 The easy fixes are always the best! 🙏🏾🫡
Absolute life saver brother❤
@@praveenfernando5394 Glad it helped! 💯🤙🏾
thanks for the help. from your little brother the miata
Anytime! Glad it helped!
Saved me so much time and money
Glad it helped! 💯
Thank you man. I appreciate it.
@@nesrinogut6724 Most definitely! Glad it helped! 🤙🏾💯
Yall be grateful, we dont all meet angels. Gb
Lol much respect, thank you. I’m glad the video was able to help! 💯🤙🏾
Brilliant, thank you 😉
You’re welcome! Glad it helped! I know how frustrating car related issues can be, especially when they lead to battery issues so I’m really glad that I could be of service!
Hero! Thanks!
Anytime! Glad it helped! 💯💪🏾
Just saved me, you are the man
Glad it helped! 💯🤙🏾
Saw you on Cameron Lilly’s Honda S2000 Restoration Channel. You seem chill like him! I want an S2000. Which hard top do you have?
I found one with a bad soft top and I just wanna go hard top.
Preciate it fam! 🙏🏾I used to have a Mugen rep hardtop, I sold that one and picked up an OEM hardtop! Favorite mod so far!
May god bless you for this, bro. I mean that with my entire being…
Much respect bro! Glad it helped! 💯🙏🏾
You the man" thanks
@@GoodThings444 Glad it helped! 💯🤙🏾
lifesaver, this was my exact problem
@@jeffkontos3415 Glad it helped! 💯💪🏾🤙🏾
Thank you three thousand!!!
Most definitely! Glad it helped! 💯
Easier to take out the fuse than to disconnect the battery because have to reprogram radio every time battery is reconnected
Facts, if you have a factory head unit. I honestly disconnect my battery every time I pull a fuse as an added precaution. However, I have an aftermarket head unit so programming it is pretty easy.
This video is a W. 🎉
Much respect bro! 💯🫡 Hope it helped!
Btw everyone when that happens dont disconnect the battery, just unplug the break light switch located just above where you replace the grommet
Another great solution to break the circuit. Instead of going to the battery location, you could just unplug the pigtail going to the switch. Unfortunately the last thing we would want anyone to do is unplug the wrong switch under their dash, hence the battery suggestion. With that being said, the battery location on some vehicles are more difficult to access than others so thank you for adding this tip! 😎🤙🏾
Thanks bro I was about to call technician
Glad it helped and you didn’t have to! 💯🤙🏾
I assume you have to purchase this part at a Honda dealership? Or, would a local auto parts store have it?
I purchased it from my local Honda dealership, just to make sure I got an exact match. However, auto parts stores usually have a universal kit that you can purchase! 😎
Damn man life saver
Glad it helped! 💯🤙🏾
I have a Toyota 2002 MR2 Spyder. I think this is my problem, with lights staying on. I found a round black rubber type disc on my floor board. Is there any way to get up in there, to do this a little more easily. Like through the front trunk? My car is so small, it's very hart to get up in there to fix it, by way of inside.
@@Livindaybyday that’s a really nice car you have there! So I believe the firewall would block you from accessing that point from the front trunk. However, a tip to make accessing that point easier would be to put the top back and move the driver seat as far back as possible. Putting the top down will give you more light to see where the grommet insert point is easily and pushing the driver seat all the way back will give you more room to work with in that area. With the S2000, I actually kneeled outside the driver section and I was able to twist in there to get to it. The access point isn’t too far up on the brake pedal. Best of luck and I hope these tips help! You got this! 🤙🏾
@@Scubah Thank you! I will try this.
@@Livindaybyday Anytime! Best of luck! 🤙🏾
@@Scubah Thank you!
Thanks!. I noticed my Cruz control won't work also.
Anytime! Glad it helped! 💯
Same with mine! Cruise control just went out too after the brake lights
@@gabrielwelch6483 it seems like they have the same shelf life, at least they’re consistent lol 😂 that’s why I just replaced both at the same time 🤙🏾
@@Scubah I think it's cause the brake releases the cruise control anyways haha, it did my the trick for both things putting that new stopper on though.
@@gabrielwelch6483 most definitely! 💯
Put a bolt with a nut until the part arrives, btw its the same for the accel pedal. That's for your cruise control in case you are like me and trying to figure out why it doesnt work even though you debugged the whole system 😂😂😂
Good call! That definitely works too! Lol yeah at first I looked at it and was like wait a minute. I had no idea that the cruise control grommet fell out as well until I went up under the dash! 😂
What is the little white thing called?
It’s called a brake light switch grommet 🤙🏾
When I look
Under my dashboard there’s nothing there what do I do the cheack
Usually when your brake light switch grommet breaks, you will see little hardened rubber pieces on the floorboard. In the event that you don’t see anything on the floorboard, it could be a different issue. If your car isn’t receiving power, my first point of diagnosis would be checking the battery. You can jump start the car and see if it receives power and turns on. Once you do that, go to the back of your car and take a look at the brake lights. If they stay on even when you are not applying pressure to the brake pedal then you’re having an issue with the brake light switch.
When the brake lights stay on with the car off, it draws a constant electric load from the battery leading it to drain.
Hope this helps!
Thank you. It's broken. Pieces in floor board.
Glad it helped! You can purchase the grommet at many local auto part stores like Advance Auto Parts, Autozone, O’Reilly Auto Parts, and your local car dealership. The brake pedal grommet is pretty universal and should only cost a few bucks! Hope it helps Sherri! 💯
@@Scubah yes. Thanks again!
@@fishwanda Anytime!
@@Scubahits so funny that you commented this only a day ago and for some reason the staff on the phone had no clue thinking i was looking for the wallace to my grommet🥴guess im going out hunting tomorrow morning lmao
@@mindofmax2067 Lol 😂 it’s funny how that works! Yeah it should be relatively easy to find. Some auto parts stores sell a universal pack with different sizes as well! Best of luck! 💯
what if its just one brake light that stays on, and only is on when i turn parking/headlights on? and when i actually brake it doesnt light up?
It sounds like that may be an issue with the bulb itself. If the light turns on when you turn on the headlights but doesn’t signal, get brighter, when you step on the brake pedal, it’s a sign of a bad brake light bulb. In many instances, the same bulb is utilized for tail lights and brake lights. Basically one side of the connector signals once you hit the brakes and the other side signals when you turn on your parking lights/headlights. So if you swap that bulb to a new bulb, it should solve your problem. Best of luck! 😎
@@Scubah thanks man, I have a few spare bulbs so it’ll be easy. I just assumed it maybe had to do with wiring or something, I haven’t actually had the time to just try changing the bulb first
@@wrld9540 you’re welcome man! Yeah definitely try swapping the bulb for one of the spares first. It should fix that issue
@@Scubah worked just as you said. thanks again man. i know i could have searched but most of the results were showing up for the reason in your video and not just a simple bulb change. thanks for sharing the general knowledge
@@wrld9540 that’s great to hear! Honestly glad that you solved it and that it was an easy fix. Those are always the best. Cheers! 💪🏾💯
You save me what about $150? Thanks easy fix
Glad it helped! Blessings! 💯🤙🏾
@@Scubah yes sir part was $11 and pop it right in. Glad I went to the garage later that’s when I saw the brakes lights on.
@@dannybbless The easy fixes are always the best! 💪🏾Glad you noticed the brake lights before the battery drained. That’s always a tell tale sign of a broken grommet
So, the component in question is basically a butt plug for your brake pedal.
That’s a good way to put it! 😂😂😂 even brake pedals have their thing
Lmaoo Im currently using a bottle cap to hold it in place 😭😭😭😭😭
😂😂😂 I mean that is pretty innovative if we’re keeping it real! 💯
What if this didn’t work???
@@leongrayson5098 good question, it could be a faulty brake light switch itself that is causing the brake lights to stay on even when the brake pedal isn’t pressed. If you found pieces of the rubber grommet on your floorboard, that’s a tell-tale sign that the grommet broke and just needs to be replaced.
You may already know this, however, when replacing the grommet, ensure that the flat side of the grommet is the part that makes contact with the brake light switch. The pointed part of the grommet should face away from the switch.
If the brake lights themselves just won’t turn on, I would start by replacing the bulbs.
If that doesn’t solve the issue, I would refer to your owners manual and check the taillight/brake light fuse.
Then, if further troubleshooting is necessary, I would check the brake light switch assembly to ensure the plastic piece that goes in and out isn’t sticking and stuck in.
Hope this helps. 🤙🏾
I notice a few pieces of green things looking like glass on the mat
Broken window or windshield?
Such a headache!
I remember when we had to do this to yours
I made it
It just popped up in my screen
Yeeeeessss siiirr! I was a few days late lol 😂
@@Scubah great video man
@@devalosyuternal4456 Thanks brotha, I hope it helps someone, I remember when I learned about brake light switches for the first time, it was such a pain, waking up to a dead battery, then finding out that my brake lights were on the whole time LOL I saw what the grommet looked like and I was like naaaaah brah!
@@Scubah yea fam
How do you fix tail lights that stay on? Get your F-cking foot off both pedals granny and get moving!!!
@@charleshines5700 hahaha! Best one yet! 😂 😈
Video too long. Talking way too much
I disagree, this video/tutorial details the brake light switch issue, why it occurs, how to diagnose it, how to fix the brake light switch grommet, and what to do in the event that one can’t attain a brake light switch grommet at that moment. All in just about six minutes 😎
@Scubah I've seen other videos that get straight to the point. It didn't take them 6 minutes to explain
@@tammyd.fleming2349 Great! That’s the beauty of the world we live in. There are a plethora of options that cater to your specific needs.
Would I have done anything differently?
Not one bit.
As long as value was offered and this tutorial helped others in a concise manner, I’m happy. 💯