BMW E36 M3 325 328 Convertible Rear Window Regulator Removal Part 1

Enter Promo Code: YT10 at our website www.bimmermerch...
10% Discount on all purchases
Your rear window glass in your BMW convertible not coming down? Don't worry! Check out our DIY Video to learn how to remove faulty window regulator. Removal process will work on BMW E36 3-series Convertible models from 95-99 such as M3 325 328. Enjoy

[@kingrichard181]

At first, I was confused as to what part of the car you were working on until I realized that the video is upside down. LOL!

[@BradyHatt]

I can’t find that video of you removing the door panel, I need to find the video asap if you could tag me in it, would be greatly appreciated, sweet videos btw they help a lot

[@shaynek9114]

Which video contains instructions for removing the rear side panel. I got to start somewhere...

[@jianzhong794]

Thanks. It is quite helpful. I just repaired my rear window regulator of 323i 1998. I found out that it is not necessary to remove the outside trim. The inner side trim can be removed together with the underneath bar by removing three screws at time 4:00 in your video. Also the wire is not supposed to be loose (in your second video). I bought a repair kit to fix the regulator and found out that the wheel was made incorrectly. This made the wire loose. After I replaced the wheel by my old one, it works very well. Your video helped me a lot.

[@bimmermerchant]

Hello, Thank you for feedback.

[@valerietaylor8207]

bimmermerchant
Hi the problem I have is my rear window on the 323 convertible, I rolled the windows down and the left rear window will not go back up even though I use the rear switch or the switch that operates all the windows, thinking it could be the regulator I replaced it with another and the same thing has happened. Is there a module for each window and were. Thanks

[@bus2themoon875]

Anyone searching for instruction with convertible top up and window not rolling down. You need to use a diagnostic OBD tablet (I use Autel MqxiCOM mk808) plugs into car OBD port, go through menu to command car to put convertible top on service mode, once in service mode, you can open the convertible using the open button on the car. If top acting weird after replaced the window regulator, then you have to go through the menu to initialise power window regulators. I hope this helps anyone who got a broken window regulator flooded inside the rear quarter panel.

[@bobgcampbell]

How do you remove the interior door card? I didn't find any video explaining that.

[@boorhadly]

yeah that vido showing removal of the door panel is nowhere to be found. why is this one upside down??

[@Rimiler]

Great video, would be even better if it weren’t upside down. I’ll figure it out though. Thank you for your knowledge and instruction again. It’s true, sometimes the best thing in life are free.

[@bimmermerchant]

This video was one of our first videos, we were a bit nervous and didn’t know it was upside down. Thanks for watching

[@sonnylopez21]

hello there, I'm doing a replacement to these windows and I'm wondering if these window motors are replaceable?
Ive seen new ones for sale and wondering if i can just change out the motors
thx

[@JustVoiid]

Thank brotha I appreciate the video

[@bimmermerchant]

You are welcome

[@alexmadrigal3328]

just buy another one? that trim costs $100