Evinrude E TEC Flywheel Magnet Repair
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- Repairing loose magnets on a 2013 200HP Evinrude Flywheel. Loose magnets are one of the possible causes of a Low Voltage Fault. Will cause your ETEC to go into power reduction and or stall.
great information from an owner of 1 of these engines here in the UK
Do all of them attract? I reglued mine only two magnets need it, same spots so nothing has changed and painted with expoy paint but now they are all attracting if I put any metal near them plz some help with a answer
Thanks forr that info,mine has injector issue ,changed for injector same issue again.looked at flywheel and magnets have moved .so hopeing this will fix it.wouldnt it also put engins out of balance ?
Thanks for this video. Great help!!
All 18 magnets intact, but many loose and in shifted position.
I will use JB Weld and epoxy primer - hope they stuck for some years.
Thanks.
InstaBlaster
Good luck!
Hello , I'm looking for a magnet kit for Evinrude 115hp. where can i get it? Is there a store that sells it?
Sure don't - I don't believe they sold them speperate. You have to get the whole flywheel. Check eBay etc..
Tq for info...
Just wondering why you pulled the computer off? I'm getting ready to do this with my etec 225.
The pan under flywheel had to be removed. Not sure if this is your case.
According to my service center, my 115 V4 had loose magnets, (I couldn't see it..) so an additional 1100 bucks on this 3-year service today.. Have had no warnings, no low voltages (same as you show here) and I really think this is an incredible crappy design from Evinrude! Why aren't the magnets embedded??
It looks like this was done about a year ago, how did it work? Still working without issues? Thanks!
Spoke with the customer couple days ago still running srong
Great information! Can you purchase the magnets, if so where and what should you search for these magnets?
I have not sourced them
Comments are good for the youtube algorithm.
I am pushing my TH-cam page more and more.
just out of curiosity i just brought a boat with an etec 115 on it everything is all good by the mechanic but he said i might need to get a new fly wheel because its a bit rusty and could possibly have the same issue of the magnets pulling just wandering is there a way to get all the magnets off so i can sanblast the flywheel, paint it and glue them back on? cheers.
Generally the magnets will come loose on their own. If they are not loose I would not attempt to remove them Maybe sure up the edges with some two part epoxy.
Great video. Where did you purchase the missing magnets? Can’t find them online.
Re Used the old magnets. They where all there!
Mine were all there too. One broke on me and I epoxied it back together and she’s as good as new. Once again thanks for the video. Saved me from buying a new flywheel.
I just tried this and had a magnet shoot out of my hand and shatter. Now what?
Tray and see if you have at least 50%
what flywheel puller did you use?
I purchased a puller kit several years ago from a guy off eBay
@@marinemodscom did you have to set the timing after replacing the etec? Also Im doing the same exact thing on my 07 150 etec if the magnets fly out and break, and lock up the flywheel on and off can it cause further damage to other parts of the engine?
@@Wikernb I don't think the magnets themselves will cause damage they will more than like shred. Since I used the same flywheel I did not set the timing.
@@marinemodscom thanks man