Repairing Flywheel Magnets - 200 HP Johnson / Evinrude Outboard
ฝัง
- เผยแพร่เมื่อ 20 ส.ค. 2024
- eBay Epoxy Kit:rover.ebay.com/...
eBay Magnet Kit: rover.ebay.com/...
Amazon Magnet Kit: amzn.to/2K0hHeV
Amazon Epoxy Kit: amzn.to/2K145Aq
^All associate links
Part numbers are:
Epoxy Only: 431929
Epoxy & Magnet: 584304
This video is exactly what i needed to see. Even put the part part numbers in the description! thanks so much
did you mention the polarity factor? push, pull, push, pull, push, pull etc. every other one.
Explained at 3:00
how do you time the center magnet that the trigger pick up on?
How do you remove damaged magnets
Is there a specific spot to start the first magnet if they all need replaced. Let’s say they have all been unglued for several years and are just sitting together.
Didn’t realize they could be replaced,now that I tossed a damaged flywheel.Also all the ignition components got damaged under flywheel on a 2003 25hp Johnson Replaced components with 1988 components and a flywheel from same type ignition years.Motor started easily but missed Badley and then started running backwards.Never saw this before.Could the CDI cause a timing issue or trigger under flywheel?Flywheeland ignition system should be compatible.Any insight?thanks
Are all of the flywheel magnets spaced out like that
Can you repair the gear rings to mine came off I been trying to find if I can put them back on
Thanks for the video
I have a question... my husband has an evinrude intruder 150 hp. He is needing an o-ring for the fuel pump. I can send a pic of what he is needing if I need to. Where can he buy just the o-ring? Every where we look it says we have to buy the whole thing for like $800. Plz help!!!
My email is in my about me profile,
Whats his engine model number?
was wondering if I bad fly wheel could cause no spark on one cylinder
have changed stator timer coils power pack and new carbs all new parts on a oceanrunner 225 1994 johnson and still no spark one one cylinder and runs ruff
Where can i buy new magnetos ??
Hello, I saw your video in you tube about how you put magnets to the flywheel and I have some questions.
First of all I have evinrude e tec 250 hp 2005 and before a week I found that magnets are get off...i found the same and new but it's a little bit expensive 1,400€..what is your opinion??l also have photos..
I had one magnet come off do I have to do them all or can I just do the one
What about the Mercury guys?
When purchasing the kit with magnet, does it come with 2 epoxy packs? I have to replace a couple magnets because they got chipped, but 2 others just need to be epoxied back in. So I guess what I'm asking is if there is enough epoxy to do 2 magnets in the magnet kit?
Yes, comes with 2 packages.
Awesome. Thank you very much & great video!
How do you safely remove a chipped magnet? Heat and a Chisel??
Hi, would this be the same solution for a 97 mercury 25 hp? And do all flywheels have that many magnets? Do they fill up the whole thing?
Yes but same amount of magnets really not sure
Help! I was replacing my flywheel on a B&S 21hp yt3000 and dropped the key way down the hole in the crank. Using a magnet pulled it out and there is a 3/8x 1 7/8 magnet bag that came out. What does this do and it seems to long for the bolt?
What about the direction are they all same ?!
Great video! I have a mercury sportjet 175 that the magnets fell off of. Do you know if the same bolt will work for the spacing on it?
When doing this will this mess up ya timing
@@kerrymontgomery2361 Did you ever find out if it will throw off timing? About to be replacing mine
@@aaronmcmillan3010 yes it will throw off timimg
Explained at 3:00