Sukhoi Su-33 Flanker D (Academy 1/72 Scale Model)#34
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Sukhoi Su-33 Flanker D (Academy 1/72 Scale Model)#34
TAMIYA Acrylic X-14 Sky Blue
TAMIYA Acrylic XF-82 Ocean Gray2
TAMIYA Acrylic XF-23 Light Blue
TAMIYA Acrylic XF-2 Flat White
TAMIYA Acrylic XF-7 Flat Red
TAMIYA Acrylic XF-84 Dark Iron
TAMIYA Acrylic X- Clear Green
VALLEJO Model Air Insignia White
VALLEJO Model Air Chrome
VALLEJO Satin Acrylic Varnish
VALLEJO Matt Acrylic Varnish
ACRYSION Acrylic N76 Burnt Iron
Mr.Weathering Color - Ground Brown
Mr.Weathering Color Thinner
Mr. Mark Softer
#TamiyaAcrylic #筆塗 #Acrylicpaint
His brush work is wonderful ... Greetings from Brazil ...🇧🇷🇧🇷🇧🇷
I"ve never seen such a great video in my life I wish you prosperity
형제 친하게 지내봅시다.
👍👍
Is it possible to get such a beautiful smooth finish on a car model with brushes? I'm amazed by your skill.
I've never brush painted a scale model car before, but I’ll give it a try sometime. Thank you for watching.
나만 알고싶은 분이셨는데... 이제 글로벌해지시네요 ^^
실력으로 전세계에서 슬슬 돋보이십니다 .
감사합니다.
Amazing amazing amazing!! Masterpiece!
Amazing how you get the paint ratios right. Great work.
추천한 모델로 하실줄은 몰랐습니다^^ 역시 오늘도 잼있게 보고 갑니다. 저도 이거 만들때 참고해서 잘 그려 보겠습니다 ㅎㅎ 그나저나 조색능력이 대단하십니다
네. 덕분에 수호이 33이란 전투기를 알게 됐습니다. 조립만 해놓고 봐도 멋있는 모형이였습니다.
아크리존은 각각의 도료에 첨가 되어있는 클리어 성분 때문에 두개 이상의 위장색을 만들어 사용하기가 까다로운 점이 있어서 타미야 아크릴을 사용했습니다. 감사합니다.
Wish I could "like" 100 times! Grate work!
Thanks for watching!
Extremely cool
이번거도 죽이네요.
멋져 부러. 부라더
Excelente vídeo saludos desde Chile a mi también me encanta los aviones y él aeromodelismo gran trabajo y feliz año atrasado 👍👍🇨🇱
Bravo! Awesome job!!!
☆☆☆☆☆ 굿입니다!
Awesome job! Are you just using water to thin the paint? How do you get such a smooth finish?
Great job!
Thank you for watching.
nice job man
No primer? I see this model had great quality, seems no apatula was used, but if it's so needed, how do you manage to get colors right, they always come with bit different shade where spatula was placed
엄지 표시 꾹 누르고 갑니다! 볼 때마다 대단하시다는 생각입니다!
감사합니다.
Excellent job! It's cool see brush application can yield awesome results. A quick question- I noticed that the exhausts just appeared out of nowhere toward the end, how do you paint up your exhausts? Judging by the look i'm assuming they're airbrushed. Even if they are, I'd love to know how you achieve that burnt metal look. Cheers!
After the first priming with Gloss Black base, I painted Vallejo Model Air chrome on it. Then, It layered Tamiya's translucent colors, Clear Blue and Clear Yellow, to the entire exhaust area with a brush. Thank you for watching.
@@Chilhada Awesome, thanks! I've learned a bunch from watching your videos.
👍
Greetings from France!
A big and warm Thank You for sharing your practice and experience.
Finding experienced modelers with brush painting technics is quite a challenge.
I'm still strugguling to understand your dilution practice.
Are you only diluting as shown on screen (diping the brush in water, then wipe it, then adding if needed some more water just with a light dip in the cup of water) or do you have "off screen" dilution steps (are you pre-deluting the paint directly in the can)?
you once mentioned in one of your comments a 10% dilution ratio. is it done in the can?
Thinning acrylic paints may become a real headache for beginners and someone who has experience. Water is the easiest way to thin acrylic paint. The way to dilute acrylic paints for art in water is to mix 20-50% of the water, but The ratio for thinning with water depends on what effects you need and the surface. More than adding 50% water creates a paint effect called a wash.
I don't pre-dilute acrylic paint using containers. I diluted acrylic paints on the palette. It is the same as a method of diluted acrylic paints for art. Before using the brush, wet it with water to remove dust, etc. While painting, add a small amount of water little by little to the condition of the paint to control and maintain the concentration.
Personally, the recommended amount of water to dilute Tamiya acrylic paint(XF Flat paints) is up to 10% of the amount of the paint. It may vary depending on the type of acrylic paints you use. For example, the Vallejo Model Air is basically in a dilute state, so if you add too much water, it becomes too watery that is not suitable for painting on plastic surfaces.
Thank you for watching. Happy New Year!
안녕하세요 남기 형입니다. 와~~~ 제가 진짜 좋아하는 전투기인데 저한테 파시죠 ㅋㅋㅋ 수고비도 드릴테니까요 ㅋㅋㅋㅋ
항상 관심있게 보아주셔서 감사합니다.
혹시 1:44 위장 패턴 그리실때 어떤 걸로 그리신건지 알수있을까요?
평범한 진한 샤프로 하신걸로 보여지네요..
위장무늬 밑그림을 그릴때는 일반적인 0.5mm 샤프나 HB연필을 사용합니다. 글씨를 쓰듯 힘을 주면 도색면이 파일 수 있기 때문에 스치듯 흔적이 남는 정도로만 그려주면 지우개로 살짝 문질러서 지울 수 있습니다. 아크릴 물감은 덧칠로 수정이 가능하기 때문에 밑그림은 꼼꼼하게 그리지 않아도 됩니다. 위장무늬의 크기나 위치 정도만 표시해 주면 됩니다. 관심있게 보아 주셔서 감사합니다.
Great Job!! Do you dilute the vallejo varnish? What do you use and what is the proportion? I am having a hard time with tamiya flat clear ‘cause when i apply it it ruins the paint... maybe i don’t use enough coating layers....😥
When using Tamiya acrylic clear(xf-86, x-22) the undercoat paint may be removed, so I use a water-based varnish. The Vallejo varnish is one of the aqueous varnishes. I usually use water when diluting the Vallejo varnish. The dilution ratio of water-based varnish is 1(varnish):1(water) or 7:3. Thank you for watching.
@@Chilhada thanks a lot!!! Your videos are very inspiring, i am learning a lot. Thanks
간만이네요. 흰색 붓도색 비법이 있을까요
순색에 가까운 흰색보다 명도가 조금 낮은 인시그니아 화이트나 캐릭터 화이트등을 사용합니다. 주로 사용하고 있는 바예호 인시그니아 화이트는 타미야와 아크리존 화이트에 비해 입자가 곱기 때문에 조금 더 깔끔한 화이트를 표현할 수 있는것 같습니다.
could you try with a car or bike model?
If there are scale models that I like, I will try to make it. I thank you for your kind comment.
타미야 아크릴 나토삼색 번호가 먼가요?
타미야 아크릴 나토3색은 Xf-67그린, xf-68브라운, xf-69블랙 입니다.
@@Chilhada 고맙습니다
@@Chilhada 그럼 아카데미 레오파트 2A6을 도색하려고 하는데 필요한 도료가 무엇인가요?
조립설명서에 표기되어 있는 paint index를 참고하면 됩니다.
@@Chilhada 타미야 아크릴은 적혀있지 않던데요
WOWW. Great job.
Thank you for watching.