Looking for a harness bar or even better roll cage for a 2014 mini coupe(r58) any recommendations you might have ??? Love the channel your passion and sharing skills are amazing thanks !!!
If you are in the UK, I can highly recommend Lohen (www.Lohen.co.uk) If you’re in other parts of the world, take a look anyway and look at the goodies we can get our hands on!!!
I have a RPM Power Stage 2 tune on my 08 R55. I am installing the Snow Performance Stage 2 methanol kit. Should I expect an increase of horsepower without changing the RPM Stage 2 tune? And if so how much. Thanks for all the info.
Meth kits are not really about making more power. They are more about safely and reliably making power. It allows you to run more boost by increasing your fuel octane and running lower Intake air temps so it helps stop detonation and it helps keep your intake valves cleaner. In my opinion ALL turbo cars should have water meth injection.
@@srtowner That's what I thought. Added horsepower is by being able to add more boost because of higher octane and lower intake temp. I'm also adding the meth kit cause I understand it helps clean the intake valve stems and backside of the valves on a DI engine.
You don’t need to tune to get lower intake temps, lower intake temps will keep your ECU from pulling timing do to heat. Of course you will gain much more power if you tune for the methanol as stated in the video 👍
Around 150 psi, the reason i say “around” is because different compression testers will read differently. What is most important is that all four cylinders read within 5 or so percent. If you’re uncertain with the results of your compression test then do a leak down test
Hi! I am new r56 owner I want to scan ecu data with Torque and OBD, Some one can help me to understand what are the correct levels? Like intake air pressure , temperature Air intake and this things please? Pd. The car is n14 with dp,ic and repro Thanks
Unless you're running more than 270lb ft of torque, you should be fine with the stock clutch. Get an organic clutch and flywheel kit if you're going that high on torque, those can handle up to 350 lb ft of torque. The best part about organic clutch and flywheel kits, unlike stage 2 kits for example, is that they're still very light and quiet like a stock clutch. Seriously, don't waste your time with those garbage racing clutch kits, organic kits might be almost $2k, but they're worth the investment when you're going for high torque.
Don’t forget to subscribe th-cam.com/users/projectmini
RPM say you have to have a built engine for stage 3. You didn't even mentioned that.
Hmmmmm, no you don't.....I have an RPM Stage 3 tune...my bottom end is factory on a Cooper S.
brother I have a 2012 cooper s R56, I can use the 380cc jcw injectors in this type of car, thanks
Looking for a harness bar or even better roll cage for a 2014 mini coupe(r58) any recommendations you might have ??? Love the channel your passion and sharing skills are amazing thanks !!!
If you are in the UK, I can highly recommend Lohen (www.Lohen.co.uk) If you’re in other parts of the world, take a look anyway and look at the goodies we can get our hands on!!!
why don’t you run a ram air intake to make use of the hoodscoop?
I will when i upgrade to the AEM intake
I have a RPM Power Stage 2 tune on my 08 R55. I am installing the Snow Performance Stage 2 methanol kit. Should I expect an increase of horsepower without changing the RPM Stage 2 tune? And if so how much. Thanks for all the info.
You should expect some hp, but not a whole lot
Meth kits are not really about making more power. They are more about safely and reliably making power. It allows you to run more boost by increasing your fuel octane and running lower Intake air temps so it helps stop detonation and it helps keep your intake valves cleaner. In my opinion ALL turbo cars should have water meth injection.
💯
@@srtowner That's what I thought. Added horsepower is by being able to add more boost because of higher octane and lower intake temp. I'm also adding the meth kit cause I understand it helps clean the intake valve stems and backside of the valves on a DI engine.
You don’t need to tune to get lower intake temps, lower intake temps will keep your ECU from pulling timing do to heat. Of course you will gain much more power if you tune for the methanol as stated in the video 👍
What should the compression be
What is a good reading for a compression test on the n14 engine
Around 150 psi, the reason i say “around” is because different compression testers will read differently. What is most important is that all four cylinders read within 5 or so percent.
If you’re uncertain with the results of your compression test then do a leak down test
Hi! I am new r56 owner
I want to scan ecu data with Torque and OBD,
Some one can help me to understand what are the correct levels? Like intake air pressure , temperature Air intake and this things please?
Pd. The car is n14 with dp,ic and repro
Thanks
What exhaust setup are you running??
Mario Kart downpipe and Invidia Q300 exhaust
@@ProjectMini only the dp is needed to go stage 2 correct? Do I could go with the dp and the stock mcs exhaust?
Yes
Won’t u need to upgrade your Clutch???
It isn’t necessary for stage 3
What about the transmission? Can it handle so much power?
Yes, plenty of people are stage 3 with stock transmissions
@@ProjectMini are both manual and auto good to go?
Unless you're running more than 270lb ft of torque, you should be fine with the stock clutch. Get an organic clutch and flywheel kit if you're going that high on torque, those can handle up to 350 lb ft of torque. The best part about organic clutch and flywheel kits, unlike stage 2 kits for example, is that they're still very light and quiet like a stock clutch. Seriously, don't waste your time with those garbage racing clutch kits, organic kits might be almost $2k, but they're worth the investment when you're going for high torque.
No rod bolt upgrade?
It definitely wouldn’t hurt
There quick stage stage 3 but they dont last
👍
Hey I think I follow you on ig 👍 I’m the one with bagged r56 . I’m from Cali
I follow a lot of people, my IG is @project_mini_official
@@ProjectMini yes we are friends on there . Awesome video bro
Thank you 🙏