These are really cool! I want a pair as they would look great on my JL... Ooooookkayyy. Just found out how much they are. Decent product, but I’m going to pay my mortgage payment, instead.
Got them on $200 discount from Quadratec! So $600 instead of $800. Went up the next day. Look out to snipe those prices between the main shops you can always find a good deal if you wait a bit
Thanx for the video and easy instillation tips. But I just did a set for a friend and quickly noticed that this set up needs a relay to run the daytime running halo rings. So if anyone els is doing this set up. Make sure you add one, so you dnt have to go back in there a second time like I did.
And as far as the relay goes there is videos that show you how to use one. So you just use the ground from the drl harness, power straight from the battery and the drl wire to switch and the one left remaining back to the rings on the head light.
Halos are clearly visible in my Rubicon 2023 headlights while I cannot turn them on. It is mentioned that I can do that using The tazer while others are talking about a 4th wire. Can you please advise?
DRL halos don’t stay on. Any ideas on how to,fix? The white/green and white/brown wires were not on the same bulb. White/green was on turn signal bulb. White/Brown was on DRL bulb. Everything else works fine except the halo DRLs. They are off but if I turn on my quarter lights, they work as expected. When I go back to Auto, the halos turn off. One comment below says to wire into white/yellow instead, but I thought that was the return on the circuit. Another says to add a relay, but not sure how to do that or which relay to use. Any help?
Update. Video show DLR on white/brown but after looking for and reviewing the Jeep’s wiring diagrams, FCA made some changes. The DLR circuit is now White/Yellow. Made that change and now everything works as expected. You will also have to tap into both light bulbs. One will have the white/yellow traced wire the other will have the white/green traced wire.
@@valdeha2000 i had the same issue like the one you faced, i did switch the DRLs to the white/yellow wire and signal to the white/green but none of them is working now , any advice?
@@AhmedOuwaiss The only thing I can think of is making sure you have a good connection on the wires where you joined them. Is your light switch set to,Auto?
@@valdeha2000 No, i dont place the switch on Auto. But i took your comment and I start testing and finally got my Helos, for some reason when I switch the fog ligh on the helos switch off (projector light is off ). Is this the case with you? Thanks
I bought the morimoto led sequential turn signals also. And I'm trying to find someone that can tell me which wire to tap into for the blinker cause they are different from factory. And the drl I was just going to run straight to the fuse box. Did you have any luck figuring it out yet? Thanks
Is there a limit of how many times you can tap in to a wire? got these lights and got the Oracle halo fog lights which require to tap in same location. Just not sure If I could/should. Hope to hear back thanks
Hey Mat. You find your answer? I also got these lights and got the Oracle halo fog lights which require to tap in same location. Just not sure If I could/should. You find your answer?
Do you have to turn on the lights in order the daylight turns on? The Oracle Oculus use a different wiring in order to the daylights turns on automatically.
Not at all! You can always have the DRLs wired so they come on whenever the Jeep's interior accessories like the radio are on (I have these headlights and thats how I have them set up)! -Zach
I have installed the light on my jl 2019 rubicon and it was working fine and when i drove the driver headlight turn off and the right one is still working.
Sorry for the delayed response here! If you purchased these from us, I would give our customer service team a call to see if we can help out! 1-877-870-8556 -Zach
Shop these Skyline LED Headlights: terrain.jp/36Azwzg
Subscribe for Daily Jeep Videos: terrain.jp/SubscribeXTyt
The halos on these headlights are definitely brighter than the Mopar LED headlights that came with my 4xe.
Great video and works for the DV8 LED’s as well! The ET video for the DV8 LED’s has the DRL and turn signal wires backwards.
These are really cool! I want a pair as they would look great on my JL... Ooooookkayyy. Just found out how much they are. Decent product, but I’m going to pay my mortgage payment, instead.
Got them on $200 discount from Quadratec! So $600 instead of $800. Went up the next day. Look out to snipe those prices between the main shops you can always find a good deal if you wait a bit
Gotta love Merideth . Cool Jeep chick!
If you have JL Sahara..You will have to tap into white/yellow wire on drivers side for DRL on halos .
Do they offer matching LED turn signals
For that price it should include led tail lights and led fender flair lights ❗
At this price point, I might as well buy the OEM halo/leds. LOL.
No kidding. Good grief...
If you can find them in stock and you do get the switchback feature which is nice so I can do a delete of the turn signal on the fenders now.
@@strix9013 What is the switchback feature? Also, looks like price went up $150 bucks since this video came out. lol
Nice, what do you have for the 2021 Gladiator? Same set up
Thanx for the video and easy instillation tips. But I just did a set for a friend and quickly noticed that this set up needs a relay to run the daytime running halo rings. So if anyone els is doing this set up. Make sure you add one, so you dnt have to go back in there a second time like I did.
Did you tapped the halos to the existing DRL, or did you wire it from the fuse box? How did you installed the relay?
@@adgmz6613 I had originally tapped into the drl lights. And that’s wen I saw the issue.
And as far as the relay goes there is videos that show you how to use one. So you just use the ground from the drl harness, power straight from the battery and the drl wire to switch and the one left remaining back to the rings on the head light.
@@k5_kiaupgrades622 what was the issue?
@@adgmz6613 the halos were drawing to much power from the drl and shutting off. Once I added the relay it fixed the issue
If you don't use the extra harness can they just be installed plug and play without the turn signals options?
If you don’t want to use the amber turning light function, is it just plug and play with the original wiring harness?
U can just not wire into the turn signals and that’s all. You still have to wire in the halo rings.
I just got these in the mail today. Am I going to need to visit the dealership for a flash code to get the Halos to turn on?
Installed on my 2019 JL Sport. Halo does not operate by itself as DRL. The entire headlight and halo come on for DRL.
I have the same issue
@@alexbyczynski5583 If you have new car, DRL wire needs to be connected to WHITE/YELLOW instead of WHITE/BROWN wire.
Awesome instructions
Thanks for watching! -Zach
Is there a version for jk's
Halos are clearly visible in my Rubicon 2023 headlights while I cannot turn them on.
It is mentioned that I can do that using The tazer while others are talking about a 4th wire.
Can you please advise?
Can extreme terrain do an install of the DV8 headlights on a 2022 gladiator.
In the works!!
DRL halos don’t stay on. Any ideas on how to,fix? The white/green and white/brown wires were not on the same bulb. White/green was on turn signal bulb. White/Brown was on DRL bulb. Everything else works fine except the halo DRLs. They are off but if I turn on my quarter lights, they work as expected. When I go back to Auto, the halos turn off. One comment below says to wire into white/yellow instead, but I thought that was the return on the circuit. Another says to add a relay, but not sure how to do that or which relay to use. Any help?
Update. Video show DLR on white/brown but after looking for and reviewing the Jeep’s wiring diagrams, FCA made some changes. The DLR circuit is now White/Yellow. Made that change and now everything works as expected. You will also have to tap into both light bulbs. One will have the white/yellow traced wire the other will have the white/green traced wire.
@@valdeha2000 i had the same issue like the one you faced, i did switch the DRLs to the white/yellow wire and signal to the white/green but none of them is working now , any advice?
@@AhmedOuwaiss The only thing I can think of is making sure you have a good connection on the wires where you joined them. Is your light switch set to,Auto?
@@valdeha2000 No, i dont place the switch on Auto. But i took your comment and I start testing and finally got my Helos, for some reason when I switch the fog ligh on the helos switch off (projector light is off ).
Is this the case with you? Thanks
What jeep do you have?
I would buy them because it’s less headache connecting the halo compare to the OEM. But they always back order I’ve seen them elsewhere for less.
Do you need an anti flicker kit or to get these flashed?
Thanks
Thanks for watching! -Zach
Can I still tap the wires from the fender lights if I have the Morimoto Led turn signal kit?
Did it ever work for you? Trying to install, and have the morimoto led turn signal Kit….
I bought the morimoto led sequential turn signals also. And I'm trying to find someone that can tell me which wire to tap into for the blinker cause they are different from factory. And the drl I was just going to run straight to the fuse box. Did you have any luck figuring it out yet? Thanks
@@MichaelF1026 Any luck on this?
Is there a limit of how many times you can tap in to a wire?
got these lights and got the Oracle halo fog lights which require to tap in same location.
Just not sure If I could/should.
Hope to hear back thanks
You can tap into the same power or potentially combine both wires into one lead to minimize the amount of tap points! Hope this helps!
If I have the MORIMOTO sequential, turning signals do I tap at a different place than what is shown in the video? 11:47 help
Or, I might just call in
Thanks for the question! You can check out our video on the Morimoto turn signals here --> th-cam.com/video/sy_wuXg1zGo/w-d-xo.html
Hey Mat. You find your answer? I also got these lights and got the Oracle halo fog lights which require to tap in same location.
Just not sure If I could/should. You find your answer?
Can you switch out the stock fenders lights to LED turn signal and DRL on a base sport model without automatic lighting?
Do you have to turn on the lights in order the daylight turns on? The Oracle Oculus use a different wiring in order to the daylights turns on automatically.
Not at all! You can always have the DRLs wired so they come on whenever the Jeep's interior accessories like the radio are on (I have these headlights and thats how I have them set up)! -Zach
Do these have the same lux output as OEM?
Pls make these for the jk, no one makes them for the jk
Does the 'Halo Indicator' work in unison with the stock indicators or in place of them?
Why don't you have to flash the jeep for these?
I have installed the light on my jl 2019 rubicon and it was working fine and when i drove the driver headlight turn off and the right one is still working.
Sorry for the delayed response here! If you purchased these from us, I would give our customer service team a call to see if we can help out! 1-877-870-8556 -Zach
Are they heated to keep snow and ice off the headlight?
These headlights are not heated. -Zach
What year is the car in the video?
2018! -Zach
Are these 7 inch or 9 inch ?
These are 9" headlights specific to the JL Wrangler, thanks! -Zach
Are these Dot approved/certified?
These headlights *ARE* DOT/SAE compliant! -Zach
Will these fit the 2021 Gladiator JT, specifically Mojave trim?
They sure will! -Zach
@@extremeterrain I’ve installed exactly like the video explains. The white halo does not come on. Amber turn signal is working fine.
@@jesuscaseres1508 did you figure it out ?
Not gonna show the blinking amber light with signals?? Common now….
I checked out when she said $700 lol
My guy said 900 after shipping and taxes.
because the manufacture gives rebates at certain times..
I would put the wires into a loom :)
This wiring will screw-up both turning light and headlight- gonna end up paying certified mechanics to undo the damage.
Out of Stock since forever.
This install did not work. Halo just strobes and shuts off.
$900!?!? Nope.