Lian Li and Lamborghini?? Why?

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น • 1.1K

  • @torr136
    @torr136 6 หลายเดือนก่อน +426

    I think a collaboration with Boeing could be a good one. One of the side panels could randomly blow out, or the fan burst into flames.

    • @Christian_Johansson
      @Christian_Johansson 6 หลายเดือนก่อน +20

      gonna be great for airflow...

    • @innocentbystander3317
      @innocentbystander3317 6 หลายเดือนก่อน +8

      Flame effects > RGB effects
      May your clocks be high, and error rate low!

    • @ramonbmovies
      @ramonbmovies 6 หลายเดือนก่อน +3

      Oh gosh...you got me cracking up! lol.

    • @ramonbmovies
      @ramonbmovies 6 หลายเดือนก่อน

      @@Christian_Johansson lol

    • @Nightdare
      @Nightdare 6 หลายเดือนก่อน +6

      Wouldn't be a good collab if it didn't crash from the desk for no reason

  • @Red_Hydrangea
    @Red_Hydrangea 6 หลายเดือนก่อน +312

    If only the start button was like the car start jet fighter esque button. Missed opportunity

    • @Mr.Morden
      @Mr.Morden 6 หลายเดือนก่อน +15

      Totally, the cars even have one of those protective covers where you have to flip the protector up to press the start button.

    • @gaming_allowed
      @gaming_allowed 6 หลายเดือนก่อน +7

      in theory they could do it as car system is a 12v power system and the start button should work

    • @karjis891
      @karjis891 6 หลายเดือนก่อน +10

      My friend has a old soviet missile launch button as a power button😂

    • @OhSoTiredMan
      @OhSoTiredMan 6 หลายเดือนก่อน +1

      @@karjis891 That is sick.

    • @jameswbster
      @jameswbster 6 หลายเดือนก่อน

      Yes, this!

  • @Andrew-zi3tj
    @Andrew-zi3tj 6 หลายเดือนก่อน +313

    That opening was golden

    • @baileywitheford4899
      @baileywitheford4899 6 หลายเดือนก่อน +3

      Agreed, lmao

    • @punjabeeplaya
      @punjabeeplaya 6 หลายเดือนก่อน +5

      Golden - li

    • @MrZamboni66
      @MrZamboni66 6 หลายเดือนก่อน

      Liked it almost as much as how ridiculous he makes all of the Coolermaster Master stuff :D

    • @blockbertus
      @blockbertus 6 หลายเดือนก่อน +1

      No, that is yellow.
      scnr

    • @r0N1n_SD
      @r0N1n_SD 6 หลายเดือนก่อน

      LMAO🙌

  • @Uniclonus
    @Uniclonus 6 หลายเดือนก่อน +192

    My guess on the 0000: all the ones sent out for promo purposes were all numbered 0000 so as to not mess with the limited numbering

    • @muamercormehic4843
      @muamercormehic4843 6 หลายเดือนก่อน +19

      yes Linus group got a 0000 too

    • @LisaHarsh
      @LisaHarsh 6 หลายเดือนก่อน +3

      Just about to say that.

    • @hafidzgi
      @hafidzgi 6 หลายเดือนก่อน +1

      Companies do that with limited run

    • @blackmennewstyle
      @blackmennewstyle 6 หลายเดือนก่อน +1

      Someone give that human being her/his weight in Bitcoin....

    • @Dr_De4th
      @Dr_De4th 6 หลายเดือนก่อน +2

      Yeah, LTT had also a 0000. 🤷‍♂️

  • @arthuralford
    @arthuralford 6 หลายเดือนก่อน +115

    You kind of got the story wrong. Ferrucio Lamborghini never worked for Ferrari, but he did get his start as a tractor manufacturer. He was also a customer of Ferrari, who was unhappy that the clutch kept going out. Ferrucio took it upon himself to find a solution to the clutch problem, and discovered that a clutch he used in his tractors not only fit, it was more reliable, and cost nearly the same. Thinking Enzo Ferrari, being an "engineer" and another businessman, would be open to some advice. Instead, as the story goes, Ferrari told Lamborghini to "stick to tractors," and Ferrucio went off to become Ferrari's biggest competitor.
    The case? $300 for a small screen you can't see if you put in an air cooler (as LTT did), a few carbon fiber pieces (easily faked), mirrored glass (plastic film would do the same), and a Lamborghini badge? Nope

    • @OhSoTiredMan
      @OhSoTiredMan 6 หลายเดือนก่อน +8

      Wow, so Ferrari has always been a dick?

    • @zonnodon163
      @zonnodon163 6 หลายเดือนก่อน

      @@OhSoTiredMan Depends on ego size

    • @Adrian-is6qn
      @Adrian-is6qn 6 หลายเดือนก่อน +1

      Someone watched the movie :P That damn drawing with the bull and the horse at the car show was epic xD

    • @donatedflea
      @donatedflea 6 หลายเดือนก่อน

      Cool your not into Lamborghini lol. Some people are and for some it's worth the money.
      You sound a little jealous bud

    • @empath69
      @empath69 6 หลายเดือนก่อน +1

      @@zonnodon163 ​ @OhSoTiredMan car companies founded on emotions: Ferrari was founded on pride; Lamborghini was founded on SPITE. :)

  • @MrMartinSchou
    @MrMartinSchou 6 หลายเดือนก่อน +68

    A really good case maker collaborating with LEGO might be awesome. It could be pretty much the ultimate in flexibility, unless it's just a boring "reskin" of existing cases. I'd want to see a fully LEGO case (though I'm not sure how to to a secure motherboard mount in LEGO), where as much of it as possible is made from standard LEGO bricks (in terms of types - colours could be specialized).

    • @boam2943
      @boam2943 6 หลายเดือนก่อน +3

      There are some LEGO parts that might be able to go through the screw holes (part 3957 comes to mind but might be too thick) but I do not know if it could handle the weight.
      Probably it would be best to complement that with parts holding the edges of the motherboard and modify the CPU cooler backplate to have longer screws that could go through something like a technic plate or a technic beam.
      I have done something similar with my RPi 3B and a USB connected 2,5'' HDD, although the weight is not comparable.
      The simplest alternative would be to have an actual desktop case (motherboard horizontally mounted) instead of a tower case (motherboard vertically mounted) but, being made of LEGO with a big span, probably wouldn't handle anything on top (like a monitor).

    • @sonicmoth8340
      @sonicmoth8340 6 หลายเดือนก่อน

      @@boam2943 additionally, the rigidity of the wall to which the mother board is mounted could use some creative building to be increased.

    • @CarolusBuchwurm
      @CarolusBuchwurm 6 หลายเดือนก่อน +1

      Just use Cada bricks not Lego and you have a winner. Cause Lego quality has fallen a lot.

    • @donatedflea
      @donatedflea 6 หลายเดือนก่อน

      Why collab just make a case from Legos duhh

    • @Whizzo260z
      @Whizzo260z 6 หลายเดือนก่อน

      My friend’s brother had a case made from Lego back in the days.

  • @Adlevio
    @Adlevio 6 หลายเดือนก่อน +20

    6498 is the Lambos engine ccm³

  • @rufiorepairs
    @rufiorepairs 6 หลายเดือนก่อน +9

    I think it would be cool to collaborate with a tool manufacturer like Snap on or Matco and build a case that looks like a toolbox. I think a lot of mechanic shops would be excited for that.

    • @JustCarnivorousCupcake
      @JustCarnivorousCupcake 6 หลายเดือนก่อน +1

      Oh damn a makita matx case with handles and all? Count me in

    • @phenomanII
      @phenomanII 6 หลายเดือนก่อน

      Just the thought of In Win working with Snap-on to make a case is putting me in debt.
      In Win has made some really unique (and expensive) cases, and Snap-on toolboxes are up there as well...

  • @BenEastburn
    @BenEastburn 6 หลายเดือนก่อน +4

    Honestly either a Transformers or Star Trek case collaboration would be golden; Jay mentioned the Gundam ASUS collaboration and I can't believe no case companies thought to do a Hasbro Transformers collaboration I would pay any price!!!!!

  • @MuadDib-rx8ic
    @MuadDib-rx8ic 6 หลายเดือนก่อน +8

    Translucent mirrored glass and Carbon fiber panels by itself are nice touches and didn't need the Lambo name overhead IMO

  • @Olly_123_
    @Olly_123_ 6 หลายเดือนก่อน +106

    would be cool if they call it the "lambo li"

    • @seanhall5385
      @seanhall5385 6 หลายเดือนก่อน +7

      LianLamolini

    • @fr00tloops77
      @fr00tloops77 6 หลายเดือนก่อน +9

      LianLini

    • @wahahah
      @wahahah 6 หลายเดือนก่อน +8

      LianBoGhini

    • @Mr.Morden
      @Mr.Morden 6 หลายเดือนก่อน +1

      Lianboghini Dinamiche

    • @reptilez13
      @reptilez13 6 หลายเดือนก่อน

      Lian Lambo sounds a little cleaner

  • @TheBarajas02
    @TheBarajas02 6 หลายเดือนก่อน +177

    LTT also got number 0000 haha

    • @espartanofxfx8107
      @espartanofxfx8107 6 หลายเดือนก่อน +10

      noticed that too

    • @bigzlowered
      @bigzlowered 6 หลายเดือนก่อน

      @@espartanofxfx8107 pre-prod

    • @danisoful
      @danisoful 6 หลายเดือนก่อน +60

      Jupp, my guess is that they made some for reviewers and all are 0000

    • @josiejuicewilder8911
      @josiejuicewilder8911 6 หลายเดือนก่อน +44

      I'm assuming all the press samples have the same 0000 number and the ones for sale will all be numbered.

    • @GEFZombiemango
      @GEFZombiemango 6 หลายเดือนก่อน +14

      @@danisoful maybe that are the 2 missing from 6500

  • @senti2175
    @senti2175 6 หลายเดือนก่อน +3

    10:17 I would love a flight SIM theme case with LCD panel that gives flight readings like altitude, speed, weather, GPS etc along with CPU GPU readings in another panel with some flight design aesthetics on case itself.

  • @ash36230
    @ash36230 6 หลายเดือนก่อน +101

    They failed on the Lianborghinli name

    • @fvdeddrift
      @fvdeddrift 6 หลายเดือนก่อน

      Dammit! I suggested Lian-Liamborghini on the Linus Short Circuit video! Lol! Yers is SO much better tho! And it needs to be 100% official for that case's name!

  • @ChristopherOrmond
    @ChristopherOrmond 6 หลายเดือนก่อน +11

    Star Trek Warp Core theme, the faster the PC runs the faster the blue LEDs accelerate around the case.

  • @numa_kai
    @numa_kai 6 หลายเดือนก่อน +11

    lian li x lego. the case comes with a lego theme manual and you assemble it before putting components in. and some areas have random lego studs where you can attach lego pieces and minifigs
    or lian li x transformers. the case transforms and they have a magnetic or screwed in autobot or decepticon badges and color shift paint where on one angle its purple, on another its red XD

  • @simtheory7894
    @simtheory7894 6 หลายเดือนก่อน +32

    How do you see the screen if the side glass is mirrored?

    • @ClarkBark14
      @ClarkBark14 6 หลายเดือนก่อน +17

      It's translucent, like 50% reflective window film. Once the inside is lit up, I'm sure it's easy to see everything.

    • @Shadow0fd3ath24
      @Shadow0fd3ath24 6 หลายเดือนก่อน +4

      for the same reason you can see inside and out of a tinted car

    • @ciprianrobo
      @ciprianrobo 6 หลายเดือนก่อน +1

      Check the O11 PC Master Race edition, they did this before

    • @drbluewolf
      @drbluewolf 6 หลายเดือนก่อน +1

      ​@ciprianrobo Have that case and love it! Fill it with enough lights and it looks crystal clear when you turn it on, and a giant mirror box when off.

    • @innocentbystander3317
      @innocentbystander3317 6 หลายเดือนก่อน

      It's maaaaaaagic! Or someone (I would say most) is smarter than you... You decide, just don't lose sleep over it. 🤣

  • @Doshi-lp4tn
    @Doshi-lp4tn 6 หลายเดือนก่อน +7

    That diablo4 colab case with the health and resources rbg thing was incredible

  • @YavuzTheIntern
    @YavuzTheIntern 6 หลายเดือนก่อน +4

    I saw this yesterday on a te h store site and it isnt worth 350. If there was something interesting that came with it, like a bull statue or whatever it would make sense. Also both ltt and you got the 0000 serial?

  • @CraigLondon
    @CraigLondon 6 หลายเดือนก่อน +6

    As tasteless as an Omega/Swatch collaboration. Mirrored glass...probably where this idea was dreamed up 😂

  • @thewiever9
    @thewiever9 6 หลายเดือนก่อน +2

    I can see the potential of this case to have this with a racing sim rig, last years it has become very popular simracing.

  • @themattschulz3984
    @themattschulz3984 6 หลายเดือนก่อน +4

    That dashboard type display looks like it was designed for an early 1990ies kids tv show honestly

  • @LapNgo-h9u
    @LapNgo-h9u 6 หลายเดือนก่อน +8

    I bet you could take that down to the wreck of the Titanic at least twice before it implodes.

  • @polarbehr4968
    @polarbehr4968 6 หลายเดือนก่อน +3

    My pre-order has been in for a day already. Hurry up and ship them!

  • @ShawnHinck
    @ShawnHinck 6 หลายเดือนก่อน +1

    Fun fact, the official color of Ferrari is so yellow, red is the color of Italy which is why their race teams are red. When Ferrari and Italy weren’t getting along they had their cars painted blue

  • @southernpanda33
    @southernpanda33 6 หลายเดือนก่อน +3

    A car themed after a green 1969 Chevrolet Camaro Z/28 with the 454 in it. There’s a PC I could live with.

  • @jimdoe9827
    @jimdoe9827 6 หลายเดือนก่อน +14

    Blue and yellow are for Ultramarines, Green and yellow for Mantis Warriors, Red and Blue for Brazen Claws

  • @lukewalker1051
    @lukewalker1051 6 หลายเดือนก่อน +12

    I am an auto engineer FWIW and car guy like you Jay. I have built two Fractal cases with car theme. Nothing elaborate...minimalist...car emblems on front...Ferrari case is Ferrari red with black racing stripe. Other old R3 case is Z06 theme. I like them.
    My thoughts since you asked for feedback...
    This collab is ok. Many can afford it. I am a fan of Lian Li. I question the cheesy display which would be a disqualifier for me personally. I get they want to create an auto dash readout vibe. To me, the internal display is a waste but I do like the case. But for less money, one could forgo the cheesy display and just put a nice replica 3D Lambo hood badge on the front of Lian Li glass case and call it good. For those that want a carbon fiber motif, that's easy, can buy carbon fiber veneer in one's preferred weave and stick it on there.
    Cheers Jay.

    • @earthtaurus5515
      @earthtaurus5515 6 หลายเดือนก่อน

      Could have used the Lamborghini badge as a power button and activity LED.

    • @OhSoTiredMan
      @OhSoTiredMan 6 หลายเดือนก่อน

      I agree, it's okay. Asus' collabs are amazing with their complete custom cases that fit the genre of their respected shows.

  • @bantcliff
    @bantcliff 6 หลายเดือนก่อน +1

    I'm assuming 0000 is press release versions as Adam on Short Circuit had 0000 as well?

  • @blairz28
    @blairz28 6 หลายเดือนก่อน +6

    ltt also got 0000 I think all of the review samples aren't serialized and the production copies are numbered.

    • @dauntae24
      @dauntae24 6 หลายเดือนก่อน +3

      Just let Jay feel special next time.

  • @tassadarforaiur
    @tassadarforaiur 6 หลายเดือนก่อน +1

    God gundam themed case with an attic panel that lifts off to expose a radiator with embeded leds.
    *Might need kyoji's help

  • @ralphb8602
    @ralphb8602 6 หลายเดือนก่อน +26

    Intro LOL 😂

  • @zoranSoul
    @zoranSoul 6 หลายเดือนก่อน +2

    i want a john deer theme hahahaha or a whirlpool theme with a porcelain parts XD

  • @khyron6
    @khyron6 6 หลายเดือนก่อน +3

    Hum I can't afford 300,000$ car but I can afford a 300$ PC case. Then you can tell everyone you own a Lambo and its not a lie. ;)

  • @johnhubbard1991
    @johnhubbard1991 4 หลายเดือนก่อน

    i can see this flowing well with you forged carbon fiber water block with all satin black hard lines pearl yellow fittings and pearl yellow coolant in a satin res minimal witch leds to show case

  • @lc7ka7
    @lc7ka7 6 หลายเดือนก่อน +10

    Jay: “I’m a car guy”.
    Proceeds to not realize that 6498 is the displacement of the Lamborghini Aventador engine. 🤷‍♂️

    • @coitcordery8501
      @coitcordery8501 6 หลายเดือนก่อน

      It's not as obvious for an American as we use cubic inches or liters. In the US, it's referred to an a 6.5l v12. Not a 6498cc v12.

    • @RonJeremy514
      @RonJeremy514 5 หลายเดือนก่อน

      @@coitcordery8501 We use both liter and cc in Europe 🤦‍♂

    • @coitcordery8501
      @coitcordery8501 5 หลายเดือนก่อน

      @@RonJeremy514 I'm well aware as they are metric units. I (an American) was responding from an American perspective. The channel in question is based in California (an American state). The point I was trying to make was that Cubic Centimeters are not commonly used in the American auto industry. The American auto industry has relied on the Cubic Inches standard. I am well aware that 6.5 liters is the same as 6500 Cubic Centimeters. What I am NOT aware of is why someone would consider a Lambo as a "Car Guy's Car". Car guys work on their own cars, not pay someone $2K(That's American dollars if you were unsure.) to change their oil. I hope I was a bit clearer for our friends across the pond as to not confuse you further.

  • @jonesgang
    @jonesgang 6 หลายเดือนก่อน

    For the 2-way mirror it is worth it. When off you only see reflection but when on you see everything inside.
    Jay you really need to use this case in a build. That would be sweet!

  • @krjal3038
    @krjal3038 6 หลายเดือนก่อน +3

    They really missed a trick not calling it the Lianborghini... Li

  • @henryford6514
    @henryford6514 6 หลายเดือนก่อน +1

    Would love to see Boeing do something with a case company where the side panel keeps falling off and in the case is a TCAS screen and maybe some weather radar

  • @GunSurgeon
    @GunSurgeon 6 หลายเดือนก่อน +24

    A full carbon fiber case would be pretty awesome.

    • @quantumleaper
      @quantumleaper 6 หลายเดือนก่อน +4

      How many kidneys do you to spend on the case?

    • @GunSurgeon
      @GunSurgeon 6 หลายเดือนก่อน +5

      @@quantumleaper I’ve already given both my kidneys on my current build they will need to accept livers.

    • @Jzwiz
      @Jzwiz 6 หลายเดือนก่อน

      @@quantumleaperit wouldnt cost as much as you think since theyd only need flat sheets of it. It gets expensive when you do molding and intricate shapes that also need to be sturdy for vehicles etc

    • @innocentbystander3317
      @innocentbystander3317 6 หลายเดือนก่อน +1

      ​@@quantumleaper
      Who cares? In this world, kidneys are easy to source. How many did you need? You want Chyneese/Weeghur, Ukelarian, or Irregal irrigant? I'll give you a discount...

    • @quantumleaper
      @quantumleaper 6 หลายเดือนก่อน

      @@innocentbystander3317 Good try ignorant one. I'd appreciate it if you could try better next time... A human Kidney goes for about 10K on the black market. If you want to put a dead kidney in someone that's up to you.

  • @Hardys-Mods
    @Hardys-Mods 6 หลายเดือนก่อน +9

    probably only costs 1299$
    7:40 and the screen layout is questionable :D. I mean there its barely visible.
    Why isnt the screen on top of the PC case or on the front panel?
    An additional case fan would be way more usefull in this place where it sits right now.
    edit: 5:35 ok thats somewhat reasonable but the screen layout is goofy

    • @BeastMortThe
      @BeastMortThe 6 หลายเดือนก่อน

      Now imagine the glass put back on... now what exactly are you going to see? NOT MUCH! LoL

    • @TheSjuris
      @TheSjuris 9 วันที่ผ่านมา

      @@BeastMortThe you can see just fine through the mirrored finish panels. This isn’t the first Lian Li case with these panels. The screen has to go where it is otherwise they would need to re-tool the entire case just for this and make it even more expensive then it is.

  • @KMantle
    @KMantle 6 หลายเดือนก่อน +1

    I built a Be Quiet! system and I was gonna put a Rolls Royce Phantom in there, but the case wasn't big enough. Might upgrade to the 901 to make it happen. LOL.

  • @phj420
    @phj420 6 หลายเดือนก่อน +15

    hoonigan case would be kick ass

    • @IDv8I
      @IDv8I 6 หลายเดือนก่อน

      One of Ken's camo graphics on it...nice.

    • @djnolook384
      @djnolook384 6 หลายเดือนก่อน

      would of been before they sold and Ken was alive

    • @phj420
      @phj420 6 หลายเดือนก่อน

      @@djnolook384 the truth

    • @sirmonkey1985
      @sirmonkey1985 6 หลายเดือนก่อน

      hoonigan died with Ken sadly.

  • @DubEuro
    @DubEuro 6 หลายเดือนก่อน

    Greddy case with big chrome pipes and blue rubber boots for the fittings with a thick chrome rad looking like an intercooler. They also have really nice swivel hose with QD fittings.

  • @imaginify6173
    @imaginify6173 6 หลายเดือนก่อน +6

    i wanna know how the conversation for this collab went 😭

  • @_mike
    @_mike 6 หลายเดือนก่อน

    2:20 - 0000 is press reserved, LTT got this number as well, and I believe several others too.

  • @vpx23
    @vpx23 6 หลายเดือนก่อน +3

    LianLi was once special because the cases were 100% made of aluminium (except some small plastic covers etc.). Now at the best the panels are made of aluminium and the frame is SPCC like every other case manufacturer. Also the homepage is ridiculously slow.

    • @BeastMortThe
      @BeastMortThe 6 หลายเดือนก่อน

      Dude their site sucks. It's as bad as the ASUS site which is dogshit slow.

  • @z3r0char
    @z3r0char 6 หลายเดือนก่อน

    I also watched the ltt video on this case. They mentioned a few other case features: the Lamborghini yellow screws on the back and the rgb lighting on the exterior of the case in Lamborghini colors

  • @Athlonite69
    @Athlonite69 6 หลายเดือนก่อน +1

    Definately some missed opportunities on this case especially for the price they want for it
    1: Power button same as the Aventador start button
    2: Placement of that LCD could have been better and used an internal USB connection
    3: More Carbon fiber in the chassis less steel
    4: Better badging of the case they could have moved that case count to the same place they put the Debauer badge
    5: Made the side panel look like a really cool vented panel like it was actually off of an Aventador
    6: Some really nice chrome plated RGB fans

  • @danielgoodrum1991
    @danielgoodrum1991 6 หลายเดือนก่อน +1

    why did it sound like you said "lian li eenie meenie lamborghini " or was i just hearing things hahaha 🤣🤣

  • @senkosalihbegovic
    @senkosalihbegovic 6 หลายเดือนก่อน

    The overdub on swear words is killing me! Example, at 4:28 - "This is all the typical shSTUFF you get with the evo" LOL

  • @ramonbmovies
    @ramonbmovies 6 หลายเดือนก่อน +1

    The mirror finish is actually quite nice.

  • @KoBe2KB
    @KoBe2KB 6 หลายเดือนก่อน +1

    I would like a collab with fractal design, that would be sick.

  • @kingcrackedhen3572
    @kingcrackedhen3572 6 หลายเดือนก่อน +1

    I want to see a JTC LTT GN case, where you’ve all somehow come to a consensus on what is the ultimate case design

  • @thavionhawkmkii4509
    @thavionhawkmkii4509 6 หลายเดือนก่อน

    So review units are not counted in the limited run? LTT also got unit 0000/XXXX. It is very Italian to sell a limited number of a thing that some how ends up being more than that number.

  • @gastronovouac
    @gastronovouac 6 หลายเดือนก่อน

    @02:20 it's the same number as linus tech tips one... is it the samle case or do all review case are numbered 00000?

  • @richardsheltra7325
    @richardsheltra7325 6 หลายเดือนก่อน

    Also has yellow rgb line across it.. and yes they are all sold out thru Lamborghini seller on newegg... i believe maybe xan get one on overclockers. Still, but not newegg. I bought 3 days ago and pretty sure that night, fathers day or next it was sold out

  • @billjackson5349
    @billjackson5349 6 หลายเดือนก่อน

    Military theme would be cool and tons of directions you could go with that from ammo cans to aircraft to ships and then there are all the branches.

  • @fasthdharley
    @fasthdharley 6 หลายเดือนก่อน

    A collaboration between Jay and ‘the way of the wrench’ building a virtual pinball cabinet would be ace!

  • @nicholasbaldwin1674
    @nicholasbaldwin1674 6 หลายเดือนก่อน

    ThermalTake and BMW did this in 2009. Not the first time a computer case company and a car company collaborated on a case

  • @NicoPeyper
    @NicoPeyper 6 หลายเดือนก่อน

    "this is all the typical sh...STUFF.. you get" hahahaha that got me

  • @rainbryan
    @rainbryan 6 หลายเดือนก่อน +1

    This is going to go well with my Lamborghini X Secret Labs gaming chair!

  • @stephensullivan527
    @stephensullivan527 6 หลายเดือนก่อน +1

    I want Star Wars cases like the custom one you made

  • @brandonunger1689
    @brandonunger1689 6 หลายเดือนก่อน

    Jay, not doing this case much justice, put it all together and see how beautiful it is

  • @JayRoboFox
    @JayRoboFox 6 หลายเดือนก่อน

    id love to see an imsa collab, give the outside a livery of one the GTD, GTP, and LMP2 cars. have some really nice switches similar to the ones that would be in the car (one for power, fan control, rgb controls). maybe have the internal panted to look like a rollcage, tie it into the cable management. Also like this collab, have a screen that looks like gauge, but instead have the "speedo/tach" be the fan/pump speed, and have it mounted to the front of the case.

  • @J_Brian
    @J_Brian 6 หลายเดือนก่อน +1

    If I’m building a PC in this I’m tunning everything, adding bolt ons, a nice exhaust, & throwing on a super charger cooler.

  • @ghutkamukesh
    @ghutkamukesh 6 หลายเดือนก่อน

    LTT also got 0000 serial number seems like they played lamborghini card here, they also have limited run cars and they give a plaque 1 di x , x denoting number of run of limited production cars.

  • @the1truefluffy
    @the1truefluffy 6 หลายเดือนก่อน

    > gets all zeroes for a serial number
    > complains that he isn't number one
    I love you, Jay. Never change.

  • @j.lietka9406
    @j.lietka9406 6 หลายเดือนก่อน

    Are you going to try and make a trip to the new Microcenter? Thanks! Incredible what the new store has to offer!!

  • @zander3115
    @zander3115 6 หลายเดือนก่อน

    Hahahaha right after you peeled the thing and said "This is carbon fibre right here" I immediately said ooo cahbon fiba and then the exact clip started haha thank you for putting that in there

  • @brianhahne9623
    @brianhahne9623 6 หลายเดือนก่อน

    I’d like to see built in pump/reservoir solutions, for a water cooling theme. Like the floor of the case have a res, maybe the mb tray could be a big reservoir. With built in or just pre installed radiators and ship with choice of tubing and fittings.

  • @brothernemiel6465
    @brothernemiel6465 6 หลายเดือนก่อน

    A Games Workshop edition, the Space marine version would have a frame made of Adamantium and side panel made of Ceramite painted in your favorite chapter color, while a Custodes version would have Auramite panels...and the Ork version would be just kit bashed together from junk 'n bitz and painted in red to run fasta Clock Speedz!

  • @boatridecharm
    @boatridecharm 6 หลายเดือนก่อน

    This isn't the first gaming related Lambo collab - recently SecretLab did one for their Titan Evo and those sold out quickly from what I remember. There's definitely a demand for it.
    I'd love to see Cyberpunk themed cases. NerdForge made a custom built one when collaborating with LTT and it looked absolutely incredible.

  • @ArcticVXR1
    @ArcticVXR1 6 หลายเดือนก่อน

    Also a car guy. And i was saying to myself "keep the dials on blue and yellow jay!!". And you did!!
    Legend.

  • @Peterstarzynskitech
    @Peterstarzynskitech 6 หลายเดือนก่อน

    Now I need an asmr of Jay doing that flick thing, now that he has a car themed computer.

  • @BorosTheGamer
    @BorosTheGamer 6 หลายเดือนก่อน +2

    I wonder if Lamborghini would sue me if I modified the case 😂😂😂

  • @danielhulan3058
    @danielhulan3058 6 หลายเดือนก่อน

    LTT Short Circuit did a video on the same case. Whats confusing is theirs was numbered 0000 di 6498 too. So either Lian Li cant count or something fishy is going on. Unless the review samples were all numbered 0000.

  • @tensazangbankai
    @tensazangbankai 6 หลายเดือนก่อน +1

    A Magaman or Magaman X case or a Star Wars case would look neat.

  • @profezzorx9131
    @profezzorx9131 6 หลายเดือนก่อน +1

    Saw that case on Lian Li's IG page this morning, and I really wasn't all that impressed. Reminds me of a lot of brands that do minimal effort to make a special edition of an existing product, then charge a premium price for it... Like when Dodge was putting out different versions of the Challengers & Chargers, and the only thing differentiating them was exterior stickers and little dashboard plaques.

  • @jamesbarlett246
    @jamesbarlett246 6 หลายเดือนก่อน

    I am very satisfied with my white 011 evo xl. I bought a 7 inch Display and followed Jayztwocents sensor panel video and put the panel under my monitor.

  • @u9Nails
    @u9Nails 6 หลายเดือนก่อน

    I'd like to see a proper case collaboration with Bandai. Not just some chibi sticker, and viola! But a fully inspired piece of set art.

  • @Nerdy_Biker
    @Nerdy_Biker 6 หลายเดือนก่อน

    I'm upset at the pricing. I have the PCMR edition of the original O11D and that's price was basically what the standard O11D Evo is now. That also came with the same mirrored glass, a mirror finish IO strip. So I'm not sure a Lambo badge, and a 5" screen paired with a few strips of CF is worth doubling the case. I'm trying to figure out where the price comes from that's not just brand markup, but struggling.
    Maybe if they don't all sell, the price will come down and I may grab one then just because I can't stop collecting. But not at the launch price.

  • @Oumeic
    @Oumeic 6 หลายเดือนก่อน

    Jay is trying to come up with the perfect case design…I can see Jay’s case with a der’Bauer plaque on it. Can you guys imagine a case line designed by those two? Ultimate collaboration…and maybe even Steve at GN can input…I am sure I am not the first person to think of this. Hopefully the case would not come out looking like a Tesla truck, lol.

  • @outlet6989
    @outlet6989 6 หลายเดือนก่อน +1

    I understand there is an extra cost option coming. Four Lamborghini alloy case wheels. Price TBD.

  • @Nareimooncatt
    @Nareimooncatt 6 หลายเดือนก่อน

    I'd love to see a Collab with X-Lights, which is one of the most popular light controller programs for things like compressed Christmas light displays. Imagine an RGB focused case where you can control every single LED to do anything you want. It would put all other RGB programmer to shame.

  • @supermegarichkid2138
    @supermegarichkid2138 6 หลายเดือนก่อน +2

    Soooo... can you see the screen with the mirrored side panel on??????

  • @robins7357
    @robins7357 6 หลายเดือนก่อน

    I don't know if that would necessarily need to be a collaboration, but a case where you could only buy the large flat surfaces in e.g. sheet metal, glass, wood, etc. and the connecting structures are downloadable as 3D printer files would be awesome. Kinda like Lazer3D does, but with the option to make the corner pieces yourself. Manufacturer could offer a set with panels only, panels and heat set inserts and screws, or full DIY kit with panels, screws and already printed parts with inserts already installed.
    It would need to be cheaper than buying a fully assembled case of the same size though to really take off, I guess. Should be possible, since manufacturer saves a lot of space and thus cost in shipping. Also better for the environment ;)

  • @thevoid6756
    @thevoid6756 6 หลายเดือนก่อน

    you should have put the mirrored side panel on to check if the screen is even readable with the panel on.

  • @scottcerato4473
    @scottcerato4473 6 หลายเดือนก่อน

    It's a pity there software causes so many issues . Cpu usuage , idle temps and random gallahad II lcd pump disconnects . When the Gallahad disconnects it crashes games , running sensor gauges on fans or pump causes upto 13% cpu usuage at idle . Without the sensor displays 3% , idle temps without out software I get 36c with software can range from low 40s to high 40s . Depending whats displayed

  • @droopysloopy
    @droopysloopy 6 หลายเดือนก่อน

    I am using your cpu-block. Putting it on the shelf would be like buying a Lamborghini and parking it in the garage, never driving it. Complete madness.

  • @chunkuswumpus3515
    @chunkuswumpus3515 6 หลายเดือนก่อน

    Would be cool to have peripheral themes like Corsair matching RGB in a whole thing with their keyboards and mice not dissimilar to how some of the cableless fans work as a whole system instead of individual fans. Maybe an apple x fractal collab since their design languages often cross over or the framework laptop mini PC case x displate so you can hide your laptop PC behind a poster and have the displate mounting stuffs

  • @MMOPC78
    @MMOPC78 6 หลายเดือนก่อน

    Not to get totally off topic; but, since this a video about a case and I'm hoping Jay can provide some insight. One of the new cases shown by BeQuiet at Computex allows for "traditional" desktop builds (being able to go from tower to a "traditional" case. As it has been said numerous times: the best AiO configuration has the coolant lines being above the pump with the radiator being at the highest point. In the case I'm referring to: the radiator may be on the same plane as the pump resulting in the coolant tubes becoming the highest point in the loop. Will this harm a pump or will if be fine if the air bubbles are in the tubing and not the radiator? Hope Jay can provide some insights on this.

  • @sturm375
    @sturm375 6 หลายเดือนก่อน

    Dream colab for a case: Don't care who makes the case as long as it's quality, but DC and specifically Superman. Would love to see an old school fortress of solitude with the giant yellow key as the on/of switch.

  • @Dran_Kito
    @Dran_Kito 6 หลายเดือนก่อน

    The Hyte Y60 Hakos Baelz collab PC has nice details included. Although a lot of it is art on the glass and etched panels, they put the work in to be seen from any angle. The custom dice power button is probably the neatest thing. Hyte seems to put this kind of effort into all their collab cases and I'm curious what extra they can/will do with the Y70 touch collab they have with Doki.
    I'm curious how you see anything inside the case with a mirror finished side panel in that lambo case.

    • @TheSjuris
      @TheSjuris 9 วันที่ผ่านมา

      The same way that you can see the insides of the vision chrome case.

  • @Uchia18
    @Uchia18 6 หลายเดือนก่อน

    To keep the automotive theme going take it a step further and make a case that looks like an engine bay, a cpu shroud that looks like an engine block and has full water cooling that takes care of the cpu, gpu, and the vrms on the mobo, a custom rad that looks like one out of a car. Carbon fiber trim on the case (can be fake).

  • @paulbarnett227
    @paulbarnett227 6 หลายเดือนก่อน

    That's the second case review for this with the number 0000 on it. As someone else has pointed out - the other was LTT.

  • @Springfield_7.62x63mm
    @Springfield_7.62x63mm 6 หลายเดือนก่อน

    As a gun person I always wanted to see Be Quiet! making a collab version of their Dark Base cases with one of the German small arms manufacturers like Heckler & Koch.
    It'd be so cool and I'll definitely buy it to go with my planned all-AMD build lol.

    • @sodapopinksi667
      @sodapopinksi667 6 หลายเดือนก่อน +1

      I think you should just make a gun themed build lol. Joking, not joking

  • @kamolzaaliite
    @kamolzaaliite 6 หลายเดือนก่อน

    4:30 all the typical "stuff" yeah right you said that😂

  • @afkmanu
    @afkmanu 6 หลายเดือนก่อน

    Hi, how about a video about custom pc fan curves for the summer, I surely appreciate it because I live in a tropical area and the temperatures are like a long 12-month summer...

  • @iandavies6620
    @iandavies6620 6 หลายเดือนก่อน

    I bought one of your water blocks and it sits proudly in my custom loop. I learned how to hard line from you so it's only fitting that your water block takes pride of place in my rig. Cheers Jay 👍