GREAT VIDEO! I’m a mechanic for John Deere AGI and this little bike was giving me a world when. I checked everything but this ! Great video! Don’t give up on making them! 9 out of 10 ! Thank u sure
You are the biggest life saver I was trying to sell my atv but all the sudden my button stoped working and when I did this it worked my surprise thank you very much 😂🙏🙏🙏
Thx for tip. Have a little 110 trying to get going. It used to crank over. But now getting no power to starter. It worked for like a second. So thinking it’s the switch. Thx again
Hi Mike, I could use help. 110cc Tao Tao. Died during cold cranking after winter. Battery is good, 13.1 volts measured. New solenoid and CDI. Lights work. No click sound from solenoid or starter. Tried jumping solenoid and get nothing. Could it be this start switch?
If you jump the solenoid with a screwdriver and the starter does not turn probably bad starter. You can push the starter button and see if you get voltage on both sides of solenoid. One side should always be hot. If you get it on one side and not the other the solenoid or switch has an issue. Try tapping on the starter with the wooden handle of a hammer then jump solenoid maybe its just stuck.
@@mikesgarage9757 Thanks. It's up and running. New starter and solenoid and start button. Pretty sure it burnt up trying to start it late winter too many times.
See if ya got a idea here. Got a coleman 125 atv. Turn the key over no dash no headligjts no start. Can cross solenoid to start or push start. Thought it was ignition until i could still start it with key on. Now im not sure what it could be.
Hey my name is Justin I have a TaoTao 250 and I was riding it today and the chain came off but then I went to try to start it and won't do anything I have no lights no brake lights nothing only I can get it to start is to jump start it push it do you know what that could be
I gotta question I just got 2 of these atvs in pieces where does the key switch live at its got 2 bolt holes not sure where it goes the wirings all ripped out also so i gotta couple' projects ahead
Unless you don't have a lot of money. Maybe you don't have a n Ebay Account. Then you have to find and buy the Correct one if you can. They are not all the same. If you have another push button switch lying around you could use that as well. There are several options. This is just how to use what you already have. Thanks for the Comment.
I have a question if you could help me please? I just got a new battery for my sons Chinese four wheeler, and when I put the power wire and ground wire to the battery it automatically starts the four wheeler without the key being in or turned on. Can you please help me
It shouldnt start like that. if its just turning over and not starting the Solenoid may be stuck or something is crossing the two posts that is conductive.
Copedipper19 86 the first thing you should do is when coneccting the battery ,you start by the positive terminal first and then the negative.also you need to replace your solenoid and make sure you conect it the same way it come off and that should do it
GREAT VIDEO!
I’m a mechanic for John Deere AGI and this little bike was giving me a world when. I checked everything but this ! Great video! Don’t give up on making them! 9 out of 10 ! Thank u sure
Thanks man! I need to do more its been quite a while.
Aye man you still active on here cuz I need help
You are the biggest life saver I was trying to sell my atv but all the sudden my button stoped working and when I did this it worked my surprise thank you very much 😂🙏🙏🙏
Im glad it worked out. Thanks for the comment.
Thanks a lot, I was puzzling over what had happened to my atv and why it would start from the solenoid and not from the button.
I have the same thing happening but the switch is brand new so I don’t know if it’s the problem
Thank you so much sir!! Awesome video, this helped me alot! For those wondering this worked on my 2020 cf moto 600 ATV
Thank you got the informative and thorough video! I needed this to fix my son's taotao quad.
Thanks sorry I'm a bit late. hope its up and running.
Perfect explanations. We just got back up and running.
That's Awesome!!
Thx for tip. Have a little 110 trying to get going. It used to crank over. But now getting no power to starter. It worked for like a second. So thinking it’s the switch. Thx again
Hi Mike, I could use help. 110cc Tao Tao. Died during cold cranking after winter. Battery is good, 13.1 volts measured. New solenoid and CDI. Lights work. No click sound from solenoid or starter. Tried jumping solenoid and get nothing. Could it be this start switch?
If you jump the solenoid with a screwdriver and the starter does not turn probably bad starter. You can push the starter button and see if you get voltage on both sides of solenoid. One side should always be hot. If you get it on one side and not the other the solenoid or switch has an issue. Try tapping on the starter with the wooden handle of a hammer then jump solenoid maybe its just stuck.
@@mikesgarage9757 Thanks. It's up and running. New starter and solenoid and start button. Pretty sure it burnt up trying to start it late winter too many times.
Continúe with these chinese minibikes & atv..
Will do thinking about going to get it from storage.
I have two small atv 125 cc and bought a new start switch and they still won’t start ?!
Awesome info!!! Worked for me perfectly!!! Thank you!!
Glad it helped!
Thanks,Joe.
You bet
Great information and defiantly helped me. Thank you sir.
Glad it Helped you out.
Great first video! Very informative.
Thank you. I felt like wow this is long winded, but i wanted to get the info across.
See if ya got a idea here. Got a coleman 125 atv. Turn the key over no dash no headligjts no start. Can cross solenoid to start or push start. Thought it was ignition until i could still start it with key on. Now im not sure what it could be.
Intermittent Solenoid?
How can u get it off the atv. I can't get mine 2 start. Help me
Great job, helped me get mine sorted
Good video but if you plan on doing more please get that camera focus fixed. Was hard to follow.
Nice I’ll be doing that tonight, I have a mpx 110cc tail light. Mine doesn’t work after plugging in a new one
Was exactly the right fix for me
I am happy this worked for you. Thank you.
I got to save little Chinese moped however I need a chain for mine where you think I can get it at super weird little lynx
Very informative thank you...
Thanks Mr Mike,well explainedˈ,suscribe ,Joe thanks,continúe.
Thanks for the sub! I appreciate the comments!
Awesome I was about to change the Solenoid, but I will try this first
Hey my name is Justin I have a TaoTao 250 and I was riding it today and the chain came off but then I went to try to start it and won't do anything I have no lights no brake lights nothing only I can get it to start is to jump start it push it do you know what that could be
It would have been hilarious if you had left a 4:30 and never came back.
What color are the wires to the start button
They Vary from model to model. Best way to find out is open it and look what wires go to the contact button.
I have one it start from solinoid but not from push button any clue please?
Did you do what the video said?
Thanks so much
You're welcome!
Do you take questions over email
I can. DM Me.
@@mikesgarage9757 i looked but i couldnt find any contact imformation
Did you say royal purple oil
lol yeah. I had some small sample bottles.
I gotta question I just got 2 of these atvs in pieces where does the key switch live at its got 2 bolt holes not sure where it goes the wirings all ripped out also so i gotta couple' projects ahead
My lights don't work
Best bet, buy new unit off EBay for $12... Plug n play in 15 minutes! No muss no fuss...
Unless you don't have a lot of money. Maybe you don't have a n Ebay Account. Then you have to find and buy the Correct one if you can. They are not all the same. If you have another push button switch lying around you could use that as well. There are several options. This is just how to use what you already have. Thanks for the Comment.
Well just that little bit is gonna stop it fdoing what i'm supposed to do
I dont understand the question.
musty juan....cant find him
Went to open the switch system, after putting wd40 on the screws, but they were seized and they stripped on the first rotation😭
whatd u do to fix
I have a question if you could help me please? I just got a new battery for my sons Chinese four wheeler, and when I put the power wire and ground wire to the battery it automatically starts the four wheeler without the key being in or turned on. Can you please help me
It shouldnt start like that. if its just turning over and not starting the Solenoid may be stuck or something is crossing the two posts that is conductive.
Copedipper19 86 i'm having the same problem...please help me..
Vincent Jerome Kaipat still trying to figure it out if I do I’ll let you know and if u hear anything please do the same
Mike's Garage soon as I hook the terminals up it fires right up or try’s to turn over so what do u suggest
Copedipper19 86 the first thing you should do is when coneccting the battery ,you start by the positive terminal first and then the negative.also you need to replace your solenoid and make sure you conect it the same way it come off and that should do it
Lol 3:05
Or buy a new one and plug in for $6.99
Yes, you always can do that as well.