you might consider adding a bit of thread locker compound to the flat head screw in the breech to help against the screw backing out and potentially causing a Jam
Suggest Loctite BLUE. Thread locker products have different strengths. Some are made for permanent installs whereas others hold but allow for future removal of screws. For reference, Google search "Loctite thread locker colors"
I just ordered this mount a few days ago on Amazon. It’ll be here today so thanks for the Tutorial. With this Shotty I could care less about Scratches dings or Dents on a 200dollhair 12g But maybe I’ll live it up well before sliding the Mount over the receiver. I Deff am gonna use a drop or 2 of Semi Permanent LockTight for ShitzNGigz
Good video IMHO Try the first 2 shells with brass up. For home defense,hunting, camping, gun case/safe storage Speed load combat/tactical load. Finger off trigger/on safe. With your firing hand Grab both shells by the brass, turn the shotgun left with chamber open / up and drop first shell in push pump forward (donot pull the pump back unless in immediate danger. Easier to unload and safety reasons ) Drop your next shell in set into magazine. No fumbling in the dark, on the move, eye on surroundings and potential target. 2 shells in and you’re ready. You can shoulder stock the weapon or put the stock into hip. It will take practice with dummy shells. Practice it 18x and it becomes a habit. 19 is to much 17 is not enough! 😂😂😂😂😂😂😂😂 Good luck with your Mav. God bless
Nice video! Others show installs but you verified that the furniture actually held on to the shells. I appreciate that very much!
you might consider adding a bit of thread locker compound to the flat head screw in the breech to help against the screw backing out and potentially causing a Jam
Thsts what the nut/locking washer are for i thought
Suggest Loctite BLUE. Thread locker products have different strengths. Some are made for permanent installs whereas others hold but allow for future removal of screws. For reference, Google search "Loctite thread locker colors"
I just ordered this mount a few days ago on Amazon. It’ll be here today so thanks for the Tutorial. With this Shotty I could care less about Scratches dings or Dents on a 200dollhair 12g But maybe I’ll live it up well before sliding the Mount over the receiver. I Deff am gonna use a drop or 2 of Semi Permanent LockTight for ShitzNGigz
Muchisimas gracias!!!! compre el mismo y no sabia como instalarlo!! fue super sencillo!
Good video
IMHO
Try the first 2 shells with brass up.
For home defense,hunting,
camping,
gun case/safe storage
Speed load
combat/tactical load.
Finger off trigger/on safe.
With your firing hand Grab both shells by the brass, turn the shotgun left with chamber open / up and drop first shell in push pump forward (donot pull the pump back unless in immediate danger.
Easier to unload and safety reasons )
Drop your next shell in set into magazine.
No fumbling in the dark, on the move,
eye on surroundings and potential target.
2 shells in and you’re ready.
You can shoulder stock the weapon or put the stock into hip.
It will take practice with dummy shells.
Practice it 18x and it becomes a habit.
19 is to much 17 is not enough!
😂😂😂😂😂😂😂😂
Good luck with your Mav.
God bless
Thank you
I was looking for one of those. Thanks 😎
Just got mine today this is good product I highly recommend
I was wondering if this would fit and now I know. Thanks for all the Maverick videos.
Glad to help
I wonder if a little lithium grease would prevent a lot of scratching during installation.
Not that I use mine but do the shells block the safety?
Great video how does the rail sit on the top? Is it centered with the barrel and stock?
Thanks! Yes, the rail sits perfectly center to the barrel. After a few trips to the range, nothing seems to be coming loose.
At 3:03 which screw was that one? I can’t seem to find the screw that fits
Are you allowed to give the make and model number for it? Or direct link?
Is this product made of plastic
Has the install caused any function issues since the initial test?
Nope, not at all. I've shot over 50 rounds through it and everything is still functioning as it should.
@@sabinorico8207
Thanks.
Put some painters tape on inside of that mount
Yeah those washers are included for no reason at all.
What website did you get that from
I found this one on Amazon.
@sabinorico8207 thanks. I bought a unbranded at a gun show but the long screw they gave me isn't long enough to go through the maverick 88
Is there any particular place that you would suggest that we get this add-on from? Thank you sir!
I found mine on Amazon, I like how they have an easy return policy on the items there.
Thank you!
What is the butt stock soft shell holder?
I believe its an Uncle Mikes 12 Gauge Shell holder. I bought it at a gun show a not too long ago.
Promo`SM