Now that's the information what a real oscilloscope beginner needs! We are mechani's with basic electrical knowledge! A oscilloscope requires knowledge in electrical reading, and how to connect and Reed all those things! So from what I searched til now, you are the only one who really shows how a beginner should do it! So thank you sir...
Hello TheGibby3340, I am a retired mechanical engineer, now seriously studying automotive electronics and oscilloscopes. You have gained one more follower from Brazil.
One of the nice things that this scope shows is the pintle bounce. Slower frame rate will show a slow decline . Pintle bounce is the rebound on the seat as it closes.
Hi, thanks for another great video and clear explanation - all good👍👍👍. That looks like a pretty good and useful trace, I’m happy with that level of quality and definition from the Hantek tablet👍👍👍. Thanks for taking the time and effort to show it being used on your Suzuki, great to see a trace from a ‘real life’ application 👍👍👍. I look forward to your video showing injector current 👍👍👍. Unfortunately, due to my current health condition, lack of a garage/workshop and bad weather here, I have not had chance to try mine on my car. Hopefully, as we get some improvement with the weather I’ll get the opportunity to experiment on the car👍. Best wishes to you and your family, take care.👍👍👍
Thanks Steve. I am sorry to hear you are not at your best. Life can offer up its challenges. Keep a positive headspace, it’s important in efforts toward recovery. Your a good man Steven, I can tell from your writings. Get well. Cheers 🍻
Hola cual es la configuración de la pinza amperimétrica para compresion relativa en ese osciloscopio,,,,otra pregunta para revisar bobina e inyectores se necesitan atenuador??
Estou aprendendo inglês para poder acompanhar melhor seus vídeos, que são excelentes!!! Poderia fazer uma comparação entre o Hantek TO1000 e um Micsing, no uso automotivo? Sou mecânico no Brasil e gostaria de comprar esse hantek do vídeo.
Thanks for watching. Unfortunately I don't own any Micsig scopes. I do believe they make a very good product. Quite expensive, but perhaps the cost is justified. Cheers
Hello thanks for your informative videos, im learning how to use an oscilloscope, where can i get the the manual for how to set up the oscilloscope like the one you firsf show at the begining of the video?
Workshop manuals for your car are usually available online in a downloadable PDF. Usually around $25 USD. Be aware not all manufacturers will provide detailed scope trace data like Suzuki.
@@TheGibby3340 No, thank you for having such interesting content and taking us all along on your journey of discovery. If I could be so bold - a couple of thoughts for future programs should you wish. I would be really interested in seeing the graphing multimeter facility within the Hantek in a real life scenario. I read with interest the rear cover of the waveform book on Amazon( thanks for the recommendation ). He mentioned that a oscilloscope is only going to be used if its convenient, therefore portable, self contained, or already set up in workshop etc. This leaves a bit of a puzzle in practice. If snap on is unaffordable, and Pico is inconvenient? What are the options available. I see the Handtek showed a comparable capture as the Modis, even capturing the spindle drop, though in the comments you feel unable to recommend the Handtek due to software shortcomings? Perhaps an episode detailing what it is and is not capable of, any software app that may improve things, or even a portable, affordable alternative. Just some thoughts. Btw: you really are a natural teacher as you make things interesting and carry your audience along with you. Have a penguin 🐧 not many people get one of those. 🙏
Thanks for the kind words. Your point is taken, I am rather conflicted about the Hantek TO1000 series tablet scope. I really believe it will be a very good tool in the near future as the software reaches maturity. I hope my penguin is from the Galapogos islands. Those little guys are comical 😂
Theoretically yes. In reality not really. The software on this scope is super glitchy. I am hopeful as the soft/firmware matures, these issues with be resolved. Thx for watching, 🍻
Honestly I have no experience with the Micsig product line. However judging by the price differential I hope the Micsig is far better. I don’t like discouraging those like myself who have already committed to the TO1000’s, but I wouldn’t recommend it. Too early in the software development. Thx for watching 🍻
Now that's the information what a real oscilloscope beginner needs! We are mechani's with basic electrical knowledge! A oscilloscope requires knowledge in electrical reading, and how to connect and Reed all those things! So from what I searched til now, you are the only one who really shows how a beginner should do it! So thank you sir...
Thx very much. And thx for watching 🍻
I appreciate your explanations and detail!
Most youtubers never show where, exactly, they are connecting the probe leads.
Sometimes it’s taken for granted everyone knows…They don’t. Thx for watching 🍻
Hello TheGibby3340, I am a retired mechanical engineer, now seriously studying automotive electronics and oscilloscopes. You have gained one more follower from Brazil.
Thank you Sir. I don’t think I can pass on much helpful information to a engineer but it might be good for a laugh on occasion 🤣🍻
One of the nice things that this scope shows is the pintle bounce. Slower frame rate will show a slow decline . Pintle bounce is the rebound on the seat as it closes.
Yeah pretty telling trace. Thx for watching 🍻
Hi, thanks for another great video and clear explanation - all good👍👍👍.
That looks like a pretty good and useful trace, I’m happy with that level of quality and definition from the Hantek tablet👍👍👍. Thanks for taking the time and effort to show it being used on your Suzuki, great to see a trace from a ‘real life’ application 👍👍👍. I look forward to your video showing injector current 👍👍👍.
Unfortunately, due to my current health condition, lack of a garage/workshop and bad weather here, I have not had chance to try mine on my car. Hopefully, as we get some improvement with the weather I’ll get the opportunity to experiment on the car👍.
Best wishes to you and your family, take care.👍👍👍
Thanks Steve. I am sorry to hear you are not at your best. Life can offer up its challenges. Keep a positive headspace, it’s important in efforts toward recovery. Your a good man Steven, I can tell from your writings. Get well. Cheers 🍻
@@TheGibby3340 Thanks for your kind words and best wishes, it is greatly appreciated👍.
Hola cual es la configuración de la pinza amperimétrica para compresion relativa en ese osciloscopio,,,,otra pregunta para revisar bobina e inyectores se necesitan atenuador??
th-cam.com/video/X0mMWaI2U1Y/w-d-xo.htmlsi=7KV1stAcS6Gyl-LO
Estou aprendendo inglês para poder acompanhar melhor seus vídeos, que são excelentes!!!
Poderia fazer uma comparação entre o Hantek TO1000 e um Micsing, no uso automotivo?
Sou mecânico no Brasil e gostaria de comprar esse hantek do vídeo.
Thanks for watching. Unfortunately I don't own any Micsig scopes. I do believe they make a very good product. Quite expensive, but perhaps the cost is justified. Cheers
@@TheGibby3340 Thank you very much!!!
Hello thanks for your informative videos, im learning how to use an oscilloscope, where can i get the the manual for how to set up the oscilloscope like the one you firsf show at the begining of the video?
Workshop manuals for your car are usually available online in a downloadable PDF. Usually around $25 USD. Be aware not all manufacturers will provide detailed scope trace data like Suzuki.
Great explanation. Looking forward to pt2.
Thanks very much. And thx for watching 🍻
@@TheGibby3340 No, thank you for having such interesting content and taking us all along on your journey of discovery.
If I could be so bold - a couple of thoughts for future programs should you wish.
I would be really interested in seeing the graphing multimeter facility within the Hantek in a real life scenario.
I read with interest the rear cover of the waveform book on Amazon( thanks for the recommendation ). He mentioned that a oscilloscope is only going to be used if its convenient, therefore portable, self contained, or already set up in workshop etc.
This leaves a bit of a puzzle in practice. If snap on is unaffordable, and Pico is inconvenient? What are the options available.
I see the Handtek showed a comparable capture as the Modis, even capturing the spindle drop, though in the comments you feel unable to recommend the Handtek due to software shortcomings?
Perhaps an episode detailing what it is and is not capable of, any software app that may improve things, or even a portable, affordable alternative.
Just some thoughts. Btw: you really are a natural teacher as you make things interesting and carry your audience along with you. Have a penguin 🐧 not many people get one of those. 🙏
Thanks for the kind words. Your point is taken, I am rather conflicted about the Hantek TO1000 series tablet scope. I really believe it will be a very good tool in the near future as the software reaches maturity. I hope my penguin is from the Galapogos islands. Those little guys are comical 😂
Thanks for this video, I have the hantek 1008c scope and i am very interested in buying this scope, Please keep the video's of this scope coming
Thx for watching. I’ll try 🍻
Is hantek TO1000 series oscilloscope good for automotive use?
It’s only fair for automotive use. Consider a used SnapOn Modis, 10 times the scope for roughly the same money 🍻
Atatuner that you are using, has maximum rate of 300 volts
Is this a question? A statement?
Hello , thanks for video
Thx for watching Stephane 🍻
Can you zoom out on a long time base freeze it then zoom in? Or No zooming when the waveform is paused
Theoretically yes. In reality not really. The software on this scope is super glitchy. I am hopeful as the soft/firmware matures, these issues with be resolved. Thx for watching, 🍻
Great work boss
Just some basics your well familiar with Boss. 🍻
I also get a kick out of your SX4 being your lab rat!
That poor cars hood hinges are getting worn 🤣
U think this one is on same level as micsig automotive l
Honestly I have no experience with the Micsig product line. However judging by the price differential I hope the Micsig is far better. I don’t like discouraging those like myself who have already committed to the TO1000’s, but I wouldn’t recommend it. Too early in the software development. Thx for watching 🍻
@@TheGibby3340 thanku micsig one is more expensive
За 3 года я не научился им пользоваться, он не пригоден для автодиагностики! Тысячи настроек и всякой ерунды не дадут им никому работать вообще!