I MADE A HUGE MISTAKE WHEN BUILDING MY JAZZ TYPE R...
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- Nord VPN: Get 4 months extra on a 2 year plan here: nordvpn.com/ja.... It’s risk free with Nord’s 30 day money-back guarantee!
In this video we discover a big problem with the Jazz Type R that may put the whole build at risk. But before that we make sure to add a load more crazy modifications to turn the Honda Jazz/Fit into even more of Jazz Type R to make it look even better! Previously we have fit a K20A2 (K-series engine), known as the K20 for short, which is out of a Honda Civic EP3 Type R and we fit it into the car - but what did we do wrong on the install which has caused some ... issues?
For all business & sponsorship enquiries please email: jackmcneill@fourstroke.media
Project 7 Customs:
Instagram: / project7customs
D5 Graphics:
Facebook: / d5graphics
My TikTok:
Username: jack.mcneill
Link: / jack.mcneill
My Instagram:
Username: jackmcneill.cars
Link: / jackmcneill.cars
Get 4 months extra on a 2 year plan here: nordvpn.com/jackmcneill. It’s risk free with Nord’s 30 day money-back guarantee!
You can afford to buy a civic type r tho 🤔
Why haven't you primed the rocker 🤔
You need a 3 door car
Thoes rear lights 😍👍🔥
JDM ep3 had a front diff which I've had fitted to mine. (I imported one from Japan, new, for an Integra - there are limited numbers so if you see one get it). Expensive but game changer. If you were excited about the first drive what 'til you get it mapped, they drop Vtec to 4600 and up the RPM to 8200. Its a different animal. check oil regularly and keep 1L on you, you will burn oil each time you're in VTEC. If not, its not monitored and it is oil starved even for a short time. it's likely blown head gasket time. Hope that helps. Always use genuine Honda parts and my performance garage also recommends keeping Honda oil in it.
Thankyou for this advice man!
@@JackMcNeillCars No worries, I'm really enjoying the build, the drive to get in there and give it a go is commendable. I had my oil changed last week and after refiling it they pulled the fuse (Im guessing to the fuel pump) then turned it over for about 5-10 seconds. When i asked, was told this allows oil pressure to build up, before they refitted the fuse to start it. Prevents you running it from dry as he said in some cases it can take 15 seconds on start to get the oil up to pressure and all the way round. Thought I'd pass that one on as i noted on your first start up just fired it up on it's first go. Looking forward to the next one.
I thought all oil came from dynosaurs.
Some of the information you've given is false:
- Get it mapped IF there are any mods. Standard ECU map will do fine.
- Map on a dyno - dropping VTEC without any significant mods will result in a power dip - Honda knew where the crossover should be put.
- Reduced oil will result in oil starvation, usually ruining the crank bearings and the engine will knock. The head gasket will blow on age, overheating or boost.
Otherwise yes, a front LSD is good, OEM helical. They are easy to find in the UK and usually a whole gearbox with LSD is around 700-800 GBP. I would recommend a shorter final drive from FN2 (5.1) or a 5.33 (much rarer, like FWD USDM K24 CR-V and such)
Looking great mate only one thing I’d do is put some wheel spaces on they a little too tucked into the arches
Wrong. Looks very track ready.
@@jarrad5723 it might be track ready but looks wise would look great with spaces
@@jarrad5723 You have no idea what you are talking about dude hahahahaha. Spacers have nothing to do with a car being track ready.
if the plan is to only track it, i suggest avoid using spacers, but if its for mainly for show purposes and normal road use, then defo get some spacers on.
@@JNASLDN Spacers do absolutely nothing to a track ready car man, infact a lot of expensive high end cars already have them from factory to get a perfect fitment. Including Porches and BMWs
Sort the honda badge on the rocker cover. Scrap the paint off and paint it white or leave it sliver 👌
Yeh doing this soon 😎
Scrape*
@mikedinni6318 you tell I stayed in school csnt you 😂😂
I just discovered your channel today and it has been a treat to follow your consistent progress on your car every single video, thank you for not doing the typical british car youtuber thing of buying a new car every week and never finishing any of them, having a junkyard of unfinished projects as a result. I much prefer this format of making video after video on one single car and make a complete project out of it.
Watched this build from the very beginning and man, all i want to say is that this is my dream car rn. There’s something so classy about a pure n/a 2000’s honda, i love it, keep it up
U need bigger spacers for the rims and a sports exhaust manifold to make it look a lot nicer 😉
Very tasteful mods mate. I love the OEM+ look.
Thankyou!!!
You Remind me so much of myself 20 years ago on my Saxo VTR in my parent's garage - Wish we had youtube back then or the thought to document stuff in the max power era like you do now!
. Im 44 now and run my own bodywork business so its gone from a hobby to a living so ive no time or willing for my own cars!! but enjoy watching you and others. Car looks great. bet they'd go wild for it in Japan when it's done. All the best.
Just discovered this. I’m a Honda fan. I bought my first Honda In Australia in 2005, an Accord Euro (as it was named in Australia) 2.4 litre iVtec. Then bought my first new Civic TypeR in 2007. Traded that for a new 2010 Civic Type R. My wife currently drives a 2017 Jazz. That’s the 4th Jazz we have had. Nice content…keep it up.
stoked for you! sand or scrape the paint off the honda logo for the full effect
Hahaha yes soon 😎
Keep up the good work lad, loving the Jazz 🤙
Hi Guys, just found your channnel and found it interesting, I am a motor engineer and a honda FD2 owner, love what your doing and yes you will make a lot of mistakes .. its all part of the fun.
Oh and they do make a type R jazz in japan its calle a fit R
Replaced the chain and guides with genuine parts on my K20 engine which was second hand, after replacing on my FN2. Chain kit + guides was £550 just for parts. Subbed, I told Honda UK to do this a long time ago, but was told that they don't want to upset their loyal Jazz customer base. 🤣
u need some wheel spacers it would look killer
You need a lot of heat on the rocker when painting to get the wrinkle out. You can use a sanding block to get the honda writing shiny again
What would really step up the interior game is some good oem looking black floor mats. makes a huge difference in any car
it honestly looks so much better the red valve cover, tail lights and interior . continue to make it look amazing.
so invested in these episode continue to do your good work.
Ok first: spoiler, bigger disks, bigger Brakes, better suspension(lower), AWD?, turbo tune !!!!!!!!!!!!!!. Second: love your serie man its really cool to see a normal car turn into a sportscar. Keep up te grind 💪💪
I like that you are honest and admit the mistakes you make! That's rare nowadays!
I wish I was 20 years old... I'd start a Honda like that too. :)
Keep it up! It's getting better and better!
When using rattlecans for spraying to help avoid heavy spraying hang the item you want painted. You want the can to be vertical while spraying. The 1st coat should only be a dusting and should take atleast 3 coats to cover the material completely
Rocket cover should be tighten in several order and torque by the spec . Also you should check condition of the gasket and clean all surfaces if you don't want leaks 😂 only friendly reminder 😉 great work . With a red Jdm carpet will be amazing! !
Hahah Thankyou bro, but engine won’t be running until after I sort the front cover leak so no real reason to follow the torque specs and order. But thanks for the heads up anyways probably would’ve forgotten 😅
Cars looking great but as you were removing the boot, i noticed that the rear right seatbelt is tucked behind the black plastic trim. I didn't see any other comments about this so just a heads up.
Make the interior black and red like the seats🔥
I think you need to tint the white part only at the top of the new tailights to match the already tinted reverse part on them. Then it will be perfect
Well done on the steering wheel. I was waiting for the to bash yourself in the face!! Jeep it up. Really good series
The jazz sport bootlid has a factory spoiler with it that looks really good
I've used that VHT a handful of times it's good stuff... I use a piece of wood underneath the cover so it's edges aren't sat on the ground. 15 minute intervals and then heat but what I didn't know till later on you can spray any areas that aren't wrinkling as much. Keep it up 🤘
The back end looks much better just needs a spoiler now
U need a wide body kit
Agreed
No
Think he's trying to make this one less like a 12 year olds idea of a modified car. Looking loads better OEM+
No
OEM plus is definitely the way to go
What an amazing build! Dont forget to add the jazz vtec (sport) rear boot spoiler. Unless you plan on adding a mugen style spoiler that will mimic the civic type r?
most underrated mod for any older car is led bulb upgrade for the indicators and reverse lights!
You need the USDM Honda Fit Sport spoiler!
Don't forget the chain guides also and tensioner all oem
Yup got everything 👌🏼
Now u need some spacers and maybe rolll a bit the fenders to give a nice fitment(just an opinion I’m loving the process)
Would sound so sick with individual throttle bodies. after market 4:1 exhaust manifold with a merge collector would also help if you dont already have one.
Might as well research where you need to put Hondabond when installing a rocker cover/gasket to avoid more oil leaks in the future
re paint the intake manifold and the pulley to the left hand side of it to a nice shinier silver, would make the engine bay look so much cleaner instead of it looking a little old and used
Get an LED 3rd stop to match the taillight. It'll compete the rear lights properly.
Hmmm where to find one though…
Should put some exhaust wrap on manifold tidy up the engine bay bit more
3:49 that engine bay looks familiar 👀👀👀
Looking great it’s just missing a subtle boot spoiler
Rear lights remind of Integra lights for some reason, car looks sick 😂👌👌
Chrome indicator bulbs in the tail lights would clean them up nicely the orange tinge is just untidy
I think for more type r Ness you need some chassis stiffening.
Strut braces and maybe some stiffening underneath if there is any places to fit it
Got the rear lights spot on now! 👌
you should do a patron so we could see behind the scenes
I did comment about those tail lights and the possibility of you getting them on your previous video. Glad you did it! Looks so much better.
Fit some sideskirts with the o.g. type R badge like the ep3 has.
For SURE
GR Prius next? I'm imaging it with a 2JZ.
Excellent build, a red interior carpet would make a good video, it would probably be a first for a Honda Jazz!
Ur videos literally give old day matarmstrong vibes love it!
Awesome! Loving the new interior. I have a Jazz sport with the dull interior... so maybe one day...
What’s the rust situation looking like on it? I would deffo take a good look at the underside and common rust areas to tidy it up a bit maybe get it undersealed at some point
Great build but bin that air filter/induction even the stock airbox would be better than that garbage. Or replace with
Gruppe M
ITG Maxogen
AEM CAI (bumper fitment)
Hondata mod OEM intake
Mugen
Nice! Don't forget about the spoiler!
Nice vid man. Powdercoat the headers so the engine bay would look cleaner.
I have loved watching this build nice to see a car that most people could do rather than the usual super cars.
Interior looks great, are you planning on changing the carpet/door pillars and head liner to black as that would complete it, it never ends does it 😂
Lovely build so far, a few spacers could make the fitment a lot better
Please add a cutout valve exhaust that would be sick as you can make it quiet then if you want to rev at a car show to max volume there you go
you MUST add paddle shifter, it just looks soooo good
should sanded the Honda bag on the rocker would look slick
You need a spoiler now, I would go for the modulo wing or the JDM mugen wing
Need some LED indicators now for the rear lights.
Honda logo on the engine needs sanding back im sure 4-600 grit on a hard block then a wipe down
Wheel spacers next
Some 20mm will be so good
You should have made the writing on the rocker cover white mate!!
I had a k24 jazz and it today is still the most funnest head turning car ever
Now before paint it really needs a descent trunk spoiler...
A mugen style wing would go crazy for the type r jazz
The pulley hitting the leg, solid engine mounts. You're not allowed to notch or even drill holes in the original chassis. If you do it has to be Single Vehicle Approved and you'll get a Q plate for it. It's an MOT fail and it writes the car off completely.
looks crazy good stuff + my next idea is to wrap the car yellow or red
Jack, you still missing the JDM third mounted brake light
love the videos so far man !!
i think that the red on the engine cover looks a bit odd without the manifolds being polished , and now that you’re taking the engine out , it would be the perfect timing to do that.
Keep it up mate 💪🏼
There’s a few people about that make custom clocks and you can also just get custom faces made up for your clocks
Living the build jack but I feel like she needs a EP3 style spoiler just to top off the body kit
I think some black weather shields would add to the JDM look
Loving this bukd . Defo think Wheel spacers and a type r type spoiler will look well.
Are you cleaning up the engine while it's out too??
I am so happy that you are painting it white.
Need to get ep3 bumpers and make them fit
This build is awesome bro, I'd love a jazz type R.
It needs spacers and also,it would look good if u tinted the back lights a bit
Is it going to be championship white some day?
Needs a set of JDM Recaro front seats
Idk if u can do this but what about a type r aerial,i think it would look much better because the jazz one looks quite long and this would obvs add some more type r vibes
Those tailights look so much better
theres brands that customize clusters to make other looks, if i were you i d hit them up. They could make that cluster into a type r one look.
Time to change the old halogen bulbs In the tail lights to match the daytime running/brake lights. Oh and led number plate units
Need to polish the Honda logo on the rocker cover
randomly found the channel yesterday and was enjoying all your jazz upgrades, then today a jazz happens to drive past me :') wish it was this one haha
Brilliant, im now on Gumtree looking for a honda jazz 😂😂😂 awesome content as usual thank you 👍🏼
need to make all the grey interior stuff black, maybe a red headliner
Needs a K24 bottom end, will make 260bhp with a few bolt ons. And an LSD.
Should add spoiler and turbo, we need those turbo noises
23:26 make it a half circle so the pulley is totally avoided.. or a quarter sphere so its completely cleared.
Love this build buddy. That interior wow just wow!
👍🏻
looking good! But needs some spacers the fitment is not it (being honest)
That interior made the car awesome work
Dude, the new tail lights are fire
How absurdly large is that 'garage'? I'm jealous.