Wirelessly add LEDs to your Quadcopter | Racewire Racelite
ฝัง
- เผยแพร่เมื่อ 21 พ.ย. 2024
- The Racewire Racelites are an easy way to add LED to your quad without adding extra wire!
UPDATE these LED have been replaced with the RaceLiteWire RGB. These are RGB LED integrated on the racewire.
fpv-flightclub...
Check out the post: fpv-flightclub...
Parts Used
Neutron - fpv-flightclub...
Racewire Mini - tinyurl.com/y8...
Racelite - tinyurl.com/yc...
If you found this post helpful, it would be super cool if you purchased the components from my store or purchase items from my Amazon links. These posts are expensive and take a loooong time to make so the purchases make it possible for me to keep making them. Thanks in advance, I greatly appreciate it :)
-------------------------------------
Don't forget to subscribe!
Check out our website - fpv-flightclub.com
Like us on FaceBook - / fpvflightclub
Follow us on Instagram - / fpvflightclub
Dame I was thinking wireless as in like WiFi or Bluetooth wirelessly activity. This is hard wired technology. It’s still wired in the system only it’s soldered. You got me dude. I clicked your link thinking something else. Good one guy.
I probably would have thought they were malfunctioning if you didn’t just explain that they get brighter with the motor power. Thanks again! 🤪
That does look nice :)
what I do by-the-way is CA-glue the LED board onto the wire-board.. No chance of anything shifting that way..
Those LEDs look awesome! Thanks for the Vid Mike!
CL racing already has these with the LED's built into their racewire. No extra soldering. $7.95 a set of 4 been using them for a while.
yeah i know there are a lot of different options but i try not to support copied products. it happens :(
Would be great to have switch for at least 3 colors ;/ very neat in races.
yes that's coming!
This may or may not concern you because im sure you dont need that much range to race, however... Putting the receiver antennas under carbon or any other conductive material will affect the signal. I recommend using some zip ties or antenna tubes to mount your antennas perpendicular to the arms. Its not as clean but it will yield better signal performance. Keep up the vids and the nice builds. Maybe some acro footy videos in the future? 🤷♂️
I have only flown DJI Mavic & Mini drones. Unfortunately I had 2 Strokes in 2021 and haven’t flown more than a few hundred feet since. I find FPV s interesting and have difficulty imagining myself being able to fly them.
You can always start out in a simulator, most pilots learn the most there anyway.
I ordered RGB RaceLiteWire Mini LEDs and soldered them to the motors. the motors spin but no led. Even after I configured it in beta?
Def getting some. What tape do you use to wrap where the motor wires connect to racewire. Just was woundering I've been using electric tape and it always unrolls. Yours doesnt look as shiney. Didn't know if it was something diffrent?
Pretty nice, dude. 😊
They should make a 2 in 1 board.
On Banggood you can buy racewire with led. I have it on my kwads!
@@calcifiedbonecollector3222 Oh, great! I'm going to search for them there, thanks! 😃
yes they are banggood but those are blatant copies. i try my hardest to not support copycats.
@@MCsCreations CL racing has the LED's built into their Racewire no need to solder the LED on to the board, Just solder your motor wires. $7.95 set of 4 with your choice of colors. Been using them for a while now.
@@FarmerFpv That's great! 😃 But is it sold on Banggood or something? Because I'm from Brazil and the shipping cost from the US is too much expensive. 😕
Or you could get the cl raceing ones with the led built into the racewire
Thanks
nice to know, thx for share :D
where can i get that 3d cover
Can you let us know their durability? I snagged the racelite minis and found the LEDS would be very fragile. 2 sets didn’t even survive 1 battery with very minor crashes.
these lights have been replaced with the Racelitewire RGB. integrated led with racewire. you can select the color with the jumper pads
fpv-flightclub.com/products/racelitewire-mini-rgb-led/
@@FlightClubFPV Are they bright light thenone RGB one????
what is the width of these wires?
how to pre tin?
SO AWESOME ! 😎
? How much
You don't have on your site
Why would they not just make a board with LEDs already on it..? 🤔
Some do, we will cover new ways to do LEDs on racers soon...
Will you lose power performance?
no i haven't noticed any difference
Gnarly