How To Setup and Stow Your Nomad 1300 Rooftop Tent | Ironman 4x4

แชร์
ฝัง
  • เผยแพร่เมื่อ 15 ธ.ค. 2024

ความคิดเห็น • 19

  • @ShadowMonk609
    @ShadowMonk609 ปีที่แล้ว +1

    Do u think you could drill holes in the hard shell and put a roof rack on it

    • @Ironman4x4America
      @Ironman4x4America  ปีที่แล้ว +1

      Hi, great question. The Nomad ABS plastic shell is not structurally sound to the point of accepting a roof rack. For that, you would want to consider the Swift tent which comes with crossbars and T-slots for mounting accessories.

    • @darrinyo-mamakimble7002
      @darrinyo-mamakimble7002 10 หลายเดือนก่อน

      Sweet troll they even bit on it

  • @alexelkins3941
    @alexelkins3941 5 หลายเดือนก่อน

    Is it possible to mount this tent so that it opens to the driver side? The awning I purchased is for the passenger side.

  • @chovue2363
    @chovue2363 2 ปีที่แล้ว +2

    What kind of mods are used on the subaru outback rack to make that roof top tent work?

    • @Ironman4x4America
      @Ironman4x4America  2 ปีที่แล้ว +1

      It clamps around the factory cross bars, no mods needed for the Nomad tent. Other tents may exceed the rack dynamic load rating and will require an after market rack to support the weight.

  • @spitzieyunque
    @spitzieyunque 2 ปีที่แล้ว +2

    What are the 4 small bungees with hooks for?

    • @EagleEyeHunts
      @EagleEyeHunts ปีที่แล้ว

      Those help to secure the rain fly so rain and snow can appropriately slough off. There are pre-drilled holes on the underside of the tent mount frame where the bungees intuitively hook in :)

  • @ewagner7960
    @ewagner7960 2 ปีที่แล้ว +7

    Can I roast marshmallows on the window rods?

    • @Ironman4x4America
      @Ironman4x4America  2 ปีที่แล้ว +11

      Absolutely! We just recommend taking the rods off of the tent first before roasting.

  • @shawnfurlong2524
    @shawnfurlong2524 ปีที่แล้ว

    Mine never closes all the way. Never closed all the way since I got it. Even if I tighten the straps pretty tight. The closing side is about 2 inches higher than supposed to be.

  • @ecai1744
    @ecai1744 ปีที่แล้ว +1

    良い感じ

  • @abbymcpherson5127
    @abbymcpherson5127 ปีที่แล้ว

    Unfortunately it comes with a 30mm mattress which is extremely uncomfortable and you cant add a topper as it won't shut.

    • @-ranganakandambi4518
      @-ranganakandambi4518 ปีที่แล้ว +1

      So there is no chance in hell to leave your bedding inside? 😢

  • @catherinevalencia8893
    @catherinevalencia8893 ปีที่แล้ว

    We just bought this rooftop tent but disappointed as our roof leaks when rains 😢

    • @Ironman4x4America
      @Ironman4x4America  ปีที่แล้ว

      Please reach out to our Customer Service team and send over the details of your experience with a leak. We are always happy to help out.

  • @Teamvenomracing
    @Teamvenomracing 2 ปีที่แล้ว +1

    The ladder should be collapsed from the top down. This way the larger diameter tubes toward the bottom are exposed and the smaller top ladder posts are collapsed to make the ladder stronger. Also, a good thing to look for is the rungs of the ladder need to be flat. This is a useful gauge to tell you the ladder is at the optimal angle. Love all my Ironman4x4 gear!

  • @darrinyo-mamakimble7002
    @darrinyo-mamakimble7002 10 หลายเดือนก่อน

    Looks like pretty cheap construction for 3800 Canadian