PreArm Roll (RC1) is not neutral solution || PreArm Roll RC1 is not neutral problem solved
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- PreArm Roll (RC1) is not neutral solution || PreArm Roll RC1 is not neutral problem solved
Hello Guys!
In this video, I will show you how to solve PreArm Roll (RC1) is not a neutral problem using mission planner.
The problem arises when any of the four channels' default value is not in the range of
RCx_Trim - RCx_DZ and RCx_Trim + RCx_DZ
In this video, I have two solutions for this problem.
The first one is to change the RCx_Trim value in the full parameter list in the mission planner and set a value such that the default value lies between the
RCx_Trim - RCx_DZ and RCx_Trim + RCx_DZ.
The other solution is to change the default value of the channel using the trim buttons on the Radio Transmitter.
I hope you will like the video.
Don't forget to subscribe to my channel
Thank you.
jazakALLAH azhar bhai...!
Thank you so much bro. It was a very useful video . Please continue making such videos ❤
useful knowledge.thanks
Flight mode error kaise dur kare plz solution ❤
I have the same issue but for both rc1 and rc2 and when I followed solutions there is no deviation in the trim value and the stick value !!
My drone was working earlier when I used to arm it. Now, it is showing error while arming that "Pitch RC2 is not neutral". In Mission planner setup, the default value right now is 1495, In full parameter list RC2_DZ is 20, RC2_MAX is 2006, RC2_MIN is 982 and RC2_TRIM is 1495. Also, I have recalibrated the RC and in Setup. What could be the reason behind the error?
Increase the DZ