How to Replace Cabin Air Filter 2010 Mazda 3
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- Purchase this filter at: filterheads.co...
Mazda 3 2010 - 2013
Mazda 3 Sport 2011 - 2014
The model shown is a 2010 Mazda 3, but installation is similar on the other models.
Timestamps:
00:27 Filter location
02:05 Remove old filter
02:22 Install new filter
Purchase this filter at www.filterheads.com/AQ1151
After doing this myself I have much respect for your ability to get this on camera.
Thank you, we appreciate that.
It was a pain in the *** but I couldn't have got it done without your vid. Thank you!
Glad it helped!
When you put the footwell ceiling panel back on, make sure you line up the back part onto the metal stud before you click the tabs into place or it will rattle. You can see how it's supposed to be at 0:32
Thank you for informing us!
I haven't changed those filters in 12 years.
Oh man! It is time for a change. I would suggest getting a shop vac to vacuum out any extra debris in the housing.
Lmao, same here. And it looks like it will probably be a while before I change it. I'd probably break a few of those tabs on the process.
Nor me, lmao
Just did mine, no air con. Original owner and there were no filters at all in there, lmao.
@@filterheadswhere can I can I temporary shop vac?
Thank you so much, this video was really helpful. Dunno how the top one sits for you, I had to do some freakin houdini with my hands and hold the top filter while sliding the bottom one in.
It is a bit of a magic trick lol. Purchase your next filter at: www.filterheads.com/
Can't thank you enough for your guide. Very much appreciated.
Any time!
Thanks for the video, it helped a lot.
You're welcome!
Great video , so clear!
Glad you liked it!
You’re the best! Video was super helpful and I finally changed my filter after a year! Thanks :)
You're welcome!
Thanks for a clear and concise instructional video! I hope it will be as easy as you make it look. 🤣
A flash light and needle nose pliers to pull out the filter will make the job even easier.
Visit our website and get your cabin air filter today: www.filterheads.com/
@@filterheads used a knife and fork and spoon and it was easy as pie. I will order my next set from you next year.
Great help thank you!
You're welcome!
Excellent, very helpful. Thanks a lot !!
You're very welcome!
Purchase your new filter at: www.filterheads.com/
Trying this however one of the 2 screws seems to be worn and won’t catch with any screwdriver to take the panel off. Any suggestions?
If the screw heads are stripped, try placing a rubber band or small piece of duct tape over the top of the screw head. This should help your screwdriver get a better grip on the screw heads. If the screw head is raised, you can also attempt to use a pair of needle nose pliers to loosen it. If none of these tricks work, you can always buy a screw extractor from your local hardware store.
thx
You're welcome!
Purchase this filter at www.filterheads.com/AQ1151
This seems like a real pain in the behind. I'm gonna do it though because I love my Mazda3.
I agree this one is a poor design.
thanks