ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Cedar clad door for a garden office, in under 16 mins, almost!
ฝัง
- เผยแพร่เมื่อ 9 ก.ค. 2020
- Im cladding a solid core door, exterior grade in western red cedar. A lot goes into these doors but the out come is worth it. When its oiled up it'll look stunning and provide a solid door. I could of taken much longer on this but the outcome would be much the same.
Quality work. at the start of the video when you said I'm not in a good mood did make me laugh
Fantastic lesson, thank you. I've never seen a work ethic like yours. You work like you're on speed in every video🤣😂. And yet the outcomes are always fantastic. Please keep the lessons coming 🙏
Mike bispeng I’m glad you found something new after mma.
Now that is a door wouldn't like to try putting the shoulder through that one. Lovely job Liam keep them vids coming mate.
Just brilliant, you explain everything so well and the end result always looks amazing.
Love the channel and your pile idea is a great one I can see a lot off people using that idea.
Just a word off advice when cladding with cedar its advisable to leave a 2 to 3mm expansion when joining together, you be surprised how much that stuff can move
Love these videos, that door looks the bollocs mate. Love the no nonsense approach. Keep the vids coming.
Wow, Cannot believe how well your channel has done. You will have more subs than me in a few weeks and I have been trying for years. Well Done Buddy.
Thanks Allen, its gone crazy tbh, Ive had the week from hell, so not many videos this week, Ive got a lot of cladding coming up so will put some more detailed videos on. Thanks for your support pal!
@@thegardenroomguru You will earn more from ads than working soon. Well Done.
thats just because of the content mate, alot more people have the confidence to take on building their own shed, but no one really wants or even can mess around with their own gas etc, so i wouldnt say you where doing anything wrong bud its just that garden rooms appeals to alot more people and thats just it really, youre doing well my man.
Top job demo. As usual nice products, nice pins etc . Thank you very much
Great content William. I came across your channel a few weeks ago. I'm watching from Ireland. I look forward to seeing a new video.
You should have only pinned one side on in the beginning. Then you could have scribed the board that needed ripping from underneath cut it, fit it then end on. But it is great work none the less.
The door looks great and the craftsmanship is amazing! We need to support our British industry, please take on some apprenticeships so this knowledge gets passed down.
Imran, its so difficult to get any body!! young kids want to play xbox an smoke weed, no drive at all mate
Try going to your local building college. There will be loads of young lads waiting to be taken on, just ask the teachers who is the best.
It looks great but you shouldn't be glueing the boards. They are likely to split. Secret nailing through the tongue is sufficient.
Evening Mr. Griffin. Cracking door mate. Very nice indeed. I made one for my shed last month, not a patch on that at all. But then again, I just made it for a shed! Also, best start to a video ever. “Right, I’m gonna do a quick video cos I haven’t got a lot of time and I’m not in the best mood. A lot of companies make it look like a gate which is a load of......, well it’s not very good!” 😂😂
I’m very honest and also trying not to be derogatory about anyone else. I’ve had a real bad week and a gate door is wank! With this in mind, I engage the start of my video 😊🤣
You and yours lads are machines. A joy to watch
you inspired me Will. great details explanation
Thank you and indeed you do quality stuff🎉
Wow amazing job!!! I learn something new everyday from you!!!
Glad to see you’re using stainless pins. Good job lads
looks brilliant mate. well done on a great channel 👍
Great workmanship.... great content!!!!
Brilliant mate. That was very informative. Quality job.
Thanks William that's a great help
Love your video's, keep um coming!
excellent idea and well constructed!
WELDEN
VERY GOOD job .
shit hot work great seeing quality craftsmen in this country, you should take your business worldwide
Cracking job lad !
Little TIP! Angle your pins left and right and it will give you a better hold (yes I know its glued as well) 😎
Love your videos, on this one I have a few questions.
1) do you add a cedar strip to the base, after you have cut the excess lengths?
2) once fitted does the door align with the wall cladding, or is it recessed slightly, I’ve seen the following video you made but can’t work out how it finishes
3) how do you install the lock/handle?
Love you channel, absolute class
Hey there, enjoying your videos. I have a project coming up which may require something very similar but I was worried that by only cladding one side of the door blank that it could end up shaping the door as the cedar expands and contracts causing the whole door to curl. Am over thinking this? Or did you end up cladding the reverse side of this door in an alternative material to prevent this? Keep the videos coming. Cheers
Right sooo going to make this door with my eyes closed.🤗🤪bang some glue in
Stainless pins..hold it flush and bingo door is done
Lol this guy could make anything bloodly brillant tradesman. 😃😃
Awesome videos. Do you have any videos of installing the cedar on the outside of the building?
Love it great work.. give me a job
Great video bit of a mad rush though? Need a beer and a chill bro? 😁😁👍
Do you make a custom door lining or suit or do you use a standard lining and just let the door protrude? Assume this door opened outwards?
Looks like a very smart idea for a seamless wall.
Just found your channel and really enjoying the content, thank you. Quick one, with the fit being so tight will expansion of the cedar not be a problem?
Welcome aboard! no mate, its very stable, ill leave a healthy gap when fitting door, two reasons, door is so thick and it needs to shut, and for any increase in size when the weather hits it
The door looks fantastic, I wonderd how you clad it. Do you use an off the shelf external frame or make your own?
Mark Stones I ballsed the frame up as I was in overdrive, I’ll show you tomorrow the process 👍🏼
Nice job. Be easier to put that other side trim on last
Cracking job Liam. I’m about to attempt a man cave using your techniques...told all the lads about your channel so you’ve got a few more subs from Preston Lancashire pal 👍
The mountains are calling and I must go thanks for that, hope you smash it 👌💪
Do you know the ‘Country and Western’ joke 👍😂
Where do you buy your cedar from, the quality looks really good
Awesome job Liam. Appreciate your explanation on all the parts of the process. Where do you get the cedar from?
Absolute legend😁
By cladding one side of the door is there a danger of making the door cast?
Love cedar bit expensive though
Liam did this door last with it being a clad fire door? I’m thinking of doing same?
This might be a really basic question but how did you rip that last section of cladding to such a tight tolerance?
I miss measured it mate, 1mm makes all the difference, its a long time since I had to hammer it in like that, but, as with all my videos, I want you all to see it for real and how our days progress.
william griffin I thought you’d got it perfect! Looks awesome. I meant how did you rip it rather than asking why so tight - do you use a circular saw? Try ok got it so neat
Andy Lamb yes mate, use a little makita circular saw with guide rail
Where do you get your cedar wood from pal looks so nice 👍
Bang on youth 😉
How much roughly does it cost to build a budget version of say 6x3m summer house?
hi just wondering what you pay for yr red cedar
another great video. I did message you about the franchise idea is there a way to move this forward with you. I know you're flat out but I would happily come to Leeds to meet with you to discuss.
Nice job, do you get much movement in the cedar?
kennyken very little tbh mate
Awesome videos but I am struggling to find the one that says which oil you use on your cedar ?
just uploading video with Osmo oil info
Hi. Great job. Where do you purchase the solid door from?
Sean Kinder the timber yard, but Selco sell them too
Never done anything like this or really seen but is the bottom always left like that? I know its not visible just feel it be nicer with the edge all way round
if I ever stop to breathe id bottom it out, but its not required
The Guv'nor.....!!!
Looks great who supplies your cedar please ?
Duffield timber in Ripon 👌
Smashes a door out in 16 minutes 😮
Mega
What size Cedar face do you use? 135mm or smaller?
Finish is 83mm
william griffin 👍🏻 thanks, is that just for the door or whole room too? Thanks for always taking the time to reply to questions... top bloke 💯%
Skyman111 prefer to use the 83 for the whole build as it provides more variation in boards🙌
does you use 12mm thick cedar or thicker?
Does thin or thick cedar make a difference??
Mr Shouting again.
You don’t have a brand to franchise.
And that my friends is why you always keep your hands away then using nail gun
All your work looks great, but your method of working is so manic, I reckon you need to drop down a couple of gears
Not bad for a moody git 🤣🍺great job will 👍🏼heres a few beers 🍺🍺🍺
Thomas Prendiville bad weekend my friend 😒
@@thegardenroomguru oh dear......I hope you get it sorted mate.....if there is anything i can do (from sunny Durham) just say the word 👍🏼
Thomas Prendiville just supply issues and covid trying to spoil the party , I’ll get through it
@@thegardenroomguru take care matey 👍
Enjoy woodprix woodworking instructions.
Hi will I’d be interested in a franchise I’m based in Bristol .. dm me if you’d like to discuss
He’s too quick for his guys
b21playa full tutorial next week ! Start to finish, going to be full throttle, fasten your seatbelts
william griffin Can’t wait, love watching your videos. Plan on building a garden shed out of timber next year, your channel has helped me loads 👍
50 mm nail!!?? 😂😂😂
Why are you never in a good mood ?
R A F......
check my subs mate, theres a time and place for everything, if you think I'm rough as, then maybe you need to watch a more edited channel, it's daily work and and how it is, my channel is free, I work at a high speed and use what ever is at my disposal, if its festool, and fine cabinet making you want to see, your in the wrong page