Your skills are amazing, I love your work and both welding skills and wood work skills are top notch. I wish you all the success, and I hope people will see your work and filming skills, because your channel deserves to be recognized and loved by much more people. Keep up your awesome work and love for your boat and van. Thanks from Martin from Norway 🇳🇴
Hi Martin!! What an aweseome comment to wake up too! Thanks so much for your support, it makes a huge difference to us! - hopefully you like the next video, we’re a bit nervous putting it out as it a about the van, we’re hoping it’s received ok as it’s traditional steam bending boatbuilding skills 🤞
Cheers for that! Yeah, we’re seeing some progress now which is really cool. We’re super pleased with how she’s looking at the moment! Hope to hear from you Id you catch up on the rest of the build 👍😀
As an owner of an aluminum Ex BOC Division 2 single handed masthead cutter, now sailed for fast cruising. I can say with experience of her I really like your FIND to my eye it is really well build and a great project to invest in. I think your very lucky to have found such a nicely build hull. your going to have lots of fun building and sailing her one day. SV Skoiern IV
My grandfather built boats for Camper Nicholson & I grew up in Hamble, so I’ve been around boats & yachts all my life. Absolutely love the craftsmanship & attention to detail you guys are putting into your projects. Chapeau 👏🏼
Woa, congratulations! After a few months of teasing, it finally revealed what the aluminium project boat is. The KM 39C is an epic hull. Well done! I am very much looking forward to your journey. Please share all you can. Thanks!
For sure we will be sharing it and thanks! The journey has started with the van but we will try to keep the videos as boat orientated as we can because let’s face it.. we’re all boat people here! Thanks so much for your kind words!!
@SailHub Yes!!! I recently bought the french Renault cousin of your german Porche a "Patago 39". It's less fancy but very similar also 1 of 3 that I know off. The plan is to sail it this summer back to Belgium for a major electrical refit this winter. I'd love to also gradually upgrade the interior over time. Your content and the knowledge you share will be very beneficial!
@XArthieX that sounds amazing.. just did some Googling, very different boats here but man, she looks ready to take on a war at sea. I dare say she will stand up to more than ours, looks like a really really good sea going vessel right there! Sounds like a great plan too, be sure to let me know if we can help with anything, may even see you at some point, we will be driving up and down a bit and our ferry drops us in Amsterdam.
Having just rented a campervan for the first time (and loved it) - and searching for our first sailboat, stumbling across your channel on TH-cam is absolutely perfect. Looking forward to seeing your progression on the van and the boat.
Loving the journey and the goals. We are on a low budget sustainable journey working towards a nearly fully electric refit of a 1977 Rival 38 centre cockpit ketch.
I'm the first time on the channel and really excited to see the next episode. Huge project and I really like this switching between woodworking and metal craft in this video.
Ah thanks for joining! Yeah, there plenty more to come, can’t wait to get on with the van… we have so much planned for it but really I just want to get onto the boat! Great to get back on the tools again. -Chris
When I saw this beauty on the thumbnail I knew we'd be in for a treat. Can't wait to see the whole project, van included. I'm personally hoping to find a hidden gem like this but a cat instead. I'm sure I can learn a lot from your journey.
Ah thanks! Yeah, it took us years to find something that was right for us at the right price too. I’m sure something will come up for you, keep your eyes peeled and do t rush into something you don’t reply want! As for learning from us… goodness, don’t put the pressure on! But on. Serious note, just ask if you think we can help, we’re on Insta too if you want on the job content.
Hey! Thanks fella! Much appreciated. Man.. I have a strip planked canoe to finish building that you have just reminded me of. Gotta love a kayak mine, your all nuts! Hope our videos keep you entertained,
The Spirit 72 is magnificent with fabulous wooden boat building skills. You've found a great boat, hope you can do your best work on it. As regards moving it, I would look for a suitable trailer even then the hull only is probably around 7 tonnes? Perhaps in the UK see what options you have to get it towed, there are networks where trucks move around looking for jobs, some people take an interest in moving unusual loads. Although the canals are probably the cheapest method, at least in Europe.
Hey Tom! Thanks mate, yeah the boat is great and we are really excited!! The move has problems as it’s associated with moving through several countries. This outs the price right up there despite its weight of only 3.5T. The weight sounds good, and the shallow height too (no keel or rudders) but a beam of 3.8 that can cause the transportation problems apparently. Basically all of the import export paperwork, time at several places on the journey pushes the price really high, so high that it’s just not an option. In fact it’s insane. So, it’s going in the water! We have a plan now which is fab… We just have to implement it 😂
@@SailHub That sounds like a 'convoi exceptionnel'! With a beam of 3.8, perhaps she'll be on her side for any road journey. I guess it depends on your route to Scotland and your build site, would be easier under cover. A benefit of the lifting keel is that you don't need much of a slip or tidal range to get her afloat at end of the build, should open up more and cheaper options. The first leg to the canal/river sounds like the trickiest. I can't imagine Irish ingenuity, flexibility or accommodations in the local approach to the issue. I'm sure it will work for you.
@Tomm9y hey Tommy, thanks fella. It’s all coming together now, finally things are aligning and the van is taking shape too. As soon as we’re finished creating our new home on wheel we’re getting right into it!! Can’t wait?👊👍
Thanks John, great to have you on board, the vans coming on well. We will have a couple of videos on that soon. Not sure what’s happening in the boat but I know whatever it is I want to test my skills a bit! The vans a great place for me to get inspired again!
Hey up guys! Great to hear from you!! Cheers, we’re pretty stoked mind. Mind you, we got a lot to learn from guys like you… gotta catch up again at some point! If you ever make it home that is! Given the survival suit I saw you in I presume your thinking of crossing soon?
Great start to a new adventure! I'll be following along for sure. Getting a bare hull from Switzerland to Scotland is an adventure in itself. I think you mentioned the French canals, but the Rhine is also navigable from the Swiss border at Rheinfelden all the way to Rotterdam. A 20hp outboard on an improvised bracket, plug some holes, a bit of ballast and away you go. Best of luck from Pete in Wanaka, New Zealand.
Hey Pete! Thanks man, yeah… we’re in the same page mate! Probably because I used to live in the same town as you! What a place! Thanks for the support! Cheers, Chris 🙌
@@SailHub Aluminum is a clear trend among leading youtubers. You bring something different within this trend. We look forward to learning from your woodworking skills, as well as your extensive knowledge of all the boating equipment. Van life is the cherry on the cake!
@@cyrilvermeil thanks for that Cyril. I hope we can deliver! I think having been in the industry quite a while we have dealt with a lot and seen many views over the years. I don’t want say what’s best for who, just lay it on a plate for people to make their own descisions. There are reasons for all designs, materials and equipment and we intend to point out giver best usage along our journey. I guess what I’m saying is we want to remain factual as opposed to opinionated. As for the woodwork, we will be doing all sorts of it in the future but the boat fit our probably won’t be what be expect! 😉…. What I know is that it will be a good test of my skills I’m sure!
TH-cam made a great suggestion at last! Nice project, I have an aluminium Koopman 35 from 1982 with wooden topsides and interior, no idea who built it though. Being in Spain the issue becomes getting materials and finding the skills to do the work I cannot do. Previously I worked for VT, Pendennis and ANT which took me to Blohm & Voss and Lurssens as a Marine Electrician / Electronics technician and having spent time working on a wide variety of small craft and super yachts I know good design and workmanship when I see it. I'm imagining your project will be a cross between Sampson Boat co. and Distant Shores, so my only advice is "Keep It Simple" as I can see you are already very quality minded.
Hi, how nice to hear this, such compliments! I really hope we can live up to this! Sounds like quite the adventure you have been on! Koopman’s are just wonderful boats! Super lucky there chap! As for our plan, we don’t really do simple, it’s just not in the genes… but, we’ve struggled to enjoy a lot of sailing for to working on things so this time we’re gonna make sure we get the sailing and traveling in. The quality can wait sometimes I guess!
Funny, the youtube algorythm suggested your video to me, probably because I am following RAN sailing. But I basically just got off the boat you took the measures of the keel from. We have sailed her from the Orkneys to Bergen in Norway. Congrats, she is ging to be a great and fast yacht.
Wahey! One of the Panta Rhei crew. So cool! I would love to hear from you and find out more about your Sail. Pretty epic! I wish I could have been with you guys! 👍
I've seen the ad for this hull online when searching for alu yachts myself. I am excited to see it on TH-cam and that you will document the built process! Really interested in your interior design but mostly happy it will be done by some skilled people. Often you see some weird or low quality interior when done by the owners themselfs which is a shame for such an expensive yacht. Best of luck with this amazing project and thank you for documenting the process!
Hey, thanks! We’re really looking forward to the build. I tho k the trick is to make sure we know what we want t before we start the interior. Great to hear you think we know what we’re doing! Time will tell 😂👍⛵️
very good case, I looked at it a few years ago, but didn’t buy it because it was too far and expensive to transport. I will be watching your progress. Good luck
super keen to watch how you get on and the decisions you make! were about to start an electric ali cat on a tight budget soon. love your channel as it is and now extra love! :D
Glad I found this, lets get the Leo crowd over here since he has finished his boat now! This looks fantastic project and incredible project to follow. Great success! Subscribed!
Thanks for that! It would be well cool to get the Tally Ho bunch here!! Big shoes to fill mind!! Let’s see how we get on with the van build as a taster! Next one’s up tonight, can’t wait to be on with the boat soon!!! 👍 thanks for subscribing!
This just popped up in my feed - I’m a uk-based sailor, occasional superyacht race crew, woodworker and Tally Ho patron - you guys got an instant subscribe!
omg . what a project !! you guys are amazing and what a beuatiful shape the yacht is to begin with !! and to top it of you doing another van build too , seriously amazing i would love to help , me getting an old 55 year old snapdgranod 24 engine running and sailing dont even compare am humbled lol
Thanks man, we’re all just faffing with boat here fella! It’s all the same and it’s important to help each other along the way so thanks for standing by us!
Hi congratulations for the Alu boat. This one of Berckmeyer’s design which I am building now BM43 in Istanbul. It was on sale around 65k which I could buy but existing project soaks my cash😊. Good luck one of best designs in her class, 🤞🏻💞
Hi, is it worth you trying to contact the designer, Martin Menzner from BM yachts. I would have thought he could supply the CAD file for the bulb. Mind you I had a very poor experience with him, so now going with another aluminium yacht designer. All the very best wishes to you for the completion of the BM. I will look forward to each episode with the progress. M
@helmsman141 thanks for the help, yeah we tried that as our first port of call…. Several emails, messages and no answer. Sadly we’ve not heard much good regarding communication from him which is a shame as the boats have a great sailing reputation. I got all of the CAD from Gaastmeer who supply KM with the cut panels for the build - they were super helpful. Anyhow, we did some scans of the 1st German 39 and we have a CAD hero working on them for us, so far it look promising 🤞 Great to have you in the journey with us and thanks again! 👍
@@SailHub hi thanks for reply. I have tons of material to be posted but I have so many other stuff I only focus to finish the boat. I work 13-14 hours a day with two profies carpenter and paint guy. I am planing to start on posting on Instagram. I am following you, happy to share my experiences
@@SailHub I have 3D model of the torpedo for the kell actual weight would be 2300kg, maybe bit heavy for your project but if you need happy to send it.
Really interesting project - I have a similar boat (not ali) that was made by the last owner. I had a blank canvas too, but nothing like what you guys have in front of you! Best of lucjk. BTW nice camerawork/editing
It’s crazy right, that’s the best price we got too and then there’s in the import export faff via road through Switzerland France Germany and the UK… Godspeed indeed! 🤙⛵️
Maybe not relevant, but I went fishing on a de-commisioned Brittish mine sweeper named the Admiral out of Morrow Bay. All alluminum boat was the loudest vessel I've ever been on. Sounded like a city bus. But I did catch 4 albacore in the 40lb range, so it was a win, but holy crap what a loud boat.
For sure, they are noisy as hell! We have a plan though, and we are testing it on the van, it’s the cork you see sprayed inside. It’s very common in metal boats and seems to work really well! Sounds like an epic days fishing too by the way!
One consideration is to conclude if its saltwater aluminum, there were a lot of boats made without this rating that suffered fatal oxidtion/electrolysis issues
An exciting & demanding project. I will certainly follow along. I do hope you have worked out the tax implications of importing the boat from Switzerland. I know the can be pretty complicated and costly. Good luck
Hey Bertie, great to have you join us! Thanks! The tax…. Urgh… there’s a thing. It’s an open ended question, we’ve spoken to all of the relevant people who were actually brilliant. As in really brilliant. Basically we give them the price paid and pay the tax on it, unless of course they bekive I were taking them for a rid and then it’s to market value… I think that’s fair really, they have got to stop fraudulent behaviour 🤷♂️🤞
You could of made a plaster and glass mould of the other bulb ,25 - 50 mm thick would have been enough then thicken it up when you got home. this would have given it some drying time as well . i have made bulbs using this method before and it works . mixing the plaster and raw glass no resin just allow time for all the moisture to be gone . then place the mould in a sand bed for pouring . anyhow that's a great looking boat you have found , looking forward to see it being finished off. Cheers from a Aussie viewer living in Norway.
Great idea that! Wish we had thought of it 👍 We got by in the end with technology which is unusual for me! Still, it was a super cool learning process, fingers crossed it works out though! 👍
There’s a boat builder in Australia , fabricating with aluminum . Yeh lots of boat builders, but the work they do is immaculate and fast. They use spool guns, and simple tools. Work is first rate, and fast. Tim Turtle ? Aluminum boat build time lapse.
If I am not mistaken the hull was offered by KM some time ago, I recommended it to some friends. Interesting that it is popping up again. Think carefully about where you want to continue building, transportation to the canals is also expensive. I have built a Reinke 13M myself in ten years and a closed hall would save you a lot of time. Try to make contact with a foundry to cast the lead, we were admitted there during the company vacations with a casting master. Unfortunately, my advice sounds schoolmasterly; I can understand your enthusiasm. Good luck in anticipation of further contributions, cheers
Hey, yeah your right… it was sold during covid and got layer up since, it’s a long story and we’re glad to be building her. As for your advice, it’s not school master like, it’s dammed sensible and we appreciate it, a lot. So, thank you for helping us 👍
@@SailHub Perhaps one option would be to take the hull to the south of France, the option with the canals was formulated. There is not enough time in Switzerland to work productively. I have the feeling that your enthusiasm, which is conveyed in the video, will make the boat sail.
Hi! She left the KM factory in 2019. She was built for “German Yachtbau” who went bust whilst KM we’re building it. KM had to go through court to get ownership before they could sell it and basically it left the yard as a hull not a boat as they never had a customer for the boat - the customer was German yachtbau’s who I imagine left the scene when they went bust.
Cheers James, near enough 40k mate. Doesn’t seem a bad price to me but it’s not really a full hull yet.. The ballast has been the biggest shock so far, it’s more than the average rig! I’ve not made many keels to date and the price blew my mind. We’ve had foundry prices of 40k to cast the lead! And then there’s the transport and fitting on top!
Hi, nice to hear from you, we’re not sure yet… a few ideas but we will need to figure it out properly closer to the time. We have a few maybe’s, I guess we just see what happens closer to the time. If all else fails I could strap a rib to it and posh the thing!😂🤦♂️
@normanboyes4983 to be honest I think an outboard will be fine for a while. I sailed a few boats with outboards, they are kinda cool in a simple way. We have so much to think about I think keeping it simple until we can figure something out properly is the way forward!
Hey! Cheers man, I hope so 😂 that’s would be well cool! So I went to boat building school, but prior to that my grandfathers taught me, one a cabinet maker, the other a wood turner. I also build some race car stuff and mountain bikes in the past for fun. Basically we’ve never stopped tinkering 😂🤟
Thanks for that! We were there a good few years back, cool spot! We’ve got good memories of rock climbing on Holyhead mountain too, I once took a good fall there! Mind you… when it was wrecked a few years back that was the week after we left, crazy stuff! We do hope to be back there again for sure, nice to know the price is still sensible! Thank you!
Haha, you guys are doing something similar to myself. Currently I'm living in a VW transporter that is a working process (solar panels, LPG tank, water tank etc) until Spring. Then 2025 I will have the design for a more modernized Sheppard's hut, in which I intend to be the flagship for my own business and batch production. Ideally in 2028-2029 I'm hoping to be able to see the financial gains to buy myself a catamaran or sailing boat. Let's hope. Did you choose Scotland because the land is affordable when it comes to rent? I live in the midlands, but see myself travelling back and forwards to mid Wales when it comes to assembly. Great to be able to follow your progress 👍
Hey! Man, that’s epic! Good luck with all of that, I mean.. where do you even start! Brilliant! As for Scotland, we have family there, when we get going we will likely need to be in the south as all of our partners are there… we best get saving! Kerchhhhhing!!!
@@SailHub I'm starting with many hours Infront of spreadsheets and in the library. If money is tight, possibly building a second campervan that you can sell, while you have all the equipment to hand (and the processes all fresh in mind). I'm sure you wouldn't struggle to find a buyer with all the following and make a pretty penny as a buffer before you get started. One step back and two steps forward🤷
@terencebarnett9891 hey bud, thanks mate, that would be epic but sadly we don’t own the shed and we need to get out! It’s no stress though, we will sort something, unfortunately TH-cam doesn’t pay much so we may take on some adverts to help pay the bills. The project demands a lot of time and finding time to work alongside it is becoming increasingly difficult!
Subscribed! Will make an interesting contrast to the Tally Ho build process, it looks like you have an amazing place to start from in that hull. It would be interesting to know the back story, if it's not too painful a subject for the original owner.
That’s a really nice thing to say, Tally Ho is an epic build! As for the back story, it’s not my place. We we’re super lucky to have come across such an opportunity and the guys we bought of from was such a good chap, but we don’t want to rub salt in wounds here, let’s celebrate and do them proud, it’s way more fun! P.s thanks for joining us too, can’t wait to get the van build and get on with the first jobs!
Looks like an amazing boat! Love the lines of the cabin. Is your van single or dual rear wheels? If it is single, be careful how much wood you add, or it may end up too heavy. Hollow panels can save a lot of weight. So far it looks really beautiful!
Thanks, we really like the look of the boat which is the bonus to what we expect her sailing characteristics will be! As for the van, she’s a single. The ply is all lightweight ply and the curves I laminate are all lightweight too. Still, there is a lot of weight being added thats for sure. We will be careful, thanks for the advice it all makes perfect sense! 👍
Aluminium is the best! But, LiFePO4 batteries on average have energy density of ~120 Wh/kg. That of diesel fuel is almost 12,000 Wh/kg. So to replace one jerrycan of 20 liters = ~17kg of diesel, you'd need 1,700kg fully charged batteries. For that reason I have serious doubts if going for fully electric is wise; I'd go for hybrid (like Distant Shores) if you plan to make ocean voyages.
Yup, I presume you think we don’t know about energy density. Our journey is to document the evolution of electric. In our eyes it doesn’t work yet and we intend to get as close as we can to making it work by building an ongoing prototype test bed. We’re putting the reality out there for people to see so the fact is, we’ve got a something in common, your comment is exactly what we’re showing. It’s not the usual build and we’re thinking outside the box in every way possible to reach for better efficiency etc. it’s an interesting journey and to date we’ve just been planning the first year! Anyhow, it would be cool to hear your thoughts as we progress, Cheers, Chris
@@SailHub I'm not surprised at all you guys know 🙂 Yet, many people don't realise/know the immense difference in energy density, so I thought it was good to mention. Interesting journey. Let hope there will finally be a much much better battery; will be good for all of us. (For a 22k-subscriber channel, I commend you for responding and so quickly!)
@cornelisvanderbent8569 yeah the difference in density is catastrophic! It’s going to be a huge factor to overcome. Let’s see how far we get! 😬 We try to respond to comments as quickly as we can, we need people to help us shape our videos and channel, we’re right at the beginning of this and want to make it something with value for people. Only our audience can help us do that! Hope to catch up again 👍⛵️
@@SailHub get the damn boat in the water and underway before grasping at pie in the sky. I successfully rebuilt a 36 ft motor sailer..... Take care of the basics first and have 5 times the money you think you need.
@JohnHoranzy hey John, thanks mate! 😂👍 Being shipwright I can completely see where your coming from here. We’ve been getting on with a lot over the last 6 months and we need to get the basics confirmed before we even bother making a start. We’re pretty much there now, just the van to finish off and we’re on it!
Interesting build Best wishes. There was a Bruce Roberts designed (if I recollect correctly) aluminum hull in a similar state of completion near here. It was advertised for a few years. I don't know if they ever found a buyer. The fellows widow had it for sale. No motor, no mast etc.
That's a really nice platform that you have to start with! How did you find it? I've seen you on Odd Life Crafting a few times. Glad that your getting a boat and a damn nice one at that. Looking forward to the fit out. Personally I would find the closest water and then motor it to the UK. You might be able to borrow someones trailer and tow it to the water. That would be ideal rather than paying a transport company. I'm about ready to build a Cyber 48.
Cool! Now there’s a build to watch! Epic! We saw it years ago when KM sold it but it was out of our budget. After that I kept looking, I’ve wanted an aluminium hull for years now…. We were just about to set sail in our Najad across the Atlantic and a friend told me about this gem, I found it advertised online in German, I thought it was a scam as it was clearly the same boat I saw 2 years previous. Anyhow, we put our boat up for sale traveled to a field in the middle of nowhere and there she was. We decided if we could sell our boat we should do it. Our boat sold in 3 days!! As for the Odd life bunch, great guys! We’ve spent quite a bit of time together now, I’m really looking forward to seeing their project develop, we’re like carbon copies of each other with the van build too! 😂 Oh yeah, the transport thing, for sure although we don’t really have any friends in Switzerland… but that’s the plan, drop her in in Basel and up the canals… that’s should be comical!
Thats an insane price to ship that boat. I believe you could ship that across the US for $2-3k. Its not a very large boat hull and probably not very heavy. I guessing my Dodge Ram pickup would be able to tow this hull.
Your dodge would be perfect for the job. I’m told she should weigh 5T with the ballast on. The problem isn’t the distance, it’s four countries and the time taken for import export paperwork and finally putting it’s all on a ferry to our little island. Still, a frightening cost!
Your skills are amazing, I love your work and both welding skills and wood work skills are top notch. I wish you all the success, and I hope people will see your work and filming skills, because your channel deserves to be recognized and loved by much more people. Keep up your awesome work and love for your boat and van. Thanks from Martin from Norway 🇳🇴
Hi Martin!! What an aweseome comment to wake up too! Thanks so much for your support, it makes a huge difference to us!
- hopefully you like the next video, we’re a bit nervous putting it out as it a about the van, we’re hoping it’s received ok as it’s traditional steam bending boatbuilding skills 🤞
Theres something magical about really good woodwork. That vans gonna look amazing. Glad I found this channel!
Cheers for that!
Yeah, we’re seeing some progress now which is really cool. We’re super pleased with how she’s looking at the moment!
Hope to hear from you Id you catch up on the rest of the build 👍😀
Thanks for the shout out guys! :-) And good luck with the very cool project. Cheers!
No problem guys, you deserve it! We live what your going!! 👌⛵️🤙
And thanks!! We’re stoked to be making a start!!
Chris, Jenny I just climbed aboard for the voyage.
Hey Frank!! Welcome aboard! Thanks for joining!!
That is nuts! And then you showed us the van! Even that tiny glimpse of the quality is enough to be captivated. ✌️from the Noosa Hinterland Australia
Cheers Paul! That mean a lot to us! 😃
We can't wait to watch the steam banding process!! 🤩
Cheers guys!
YESSSSSS. It finally gets revealed !!!!!! AWESOMEEEEEEEEE. Good luck you two ! And look at that woodwork 🤤
Hey man, great to hear from you! Thanks for the compliment! 🤙⛵️
This one I can't wait to watch. So much fun to watch a craftsman in his element doing what he loves!!
Hey, thanks for that! Super to hear and also inspiring for us! Thanks!
Berkemeyer 40"! Super interesting!
Yeah! Well done recognising it, she’s one of only 3. Glad you find it interesting, thanks for commenting 👍
this project is so cool. can't wait to see it sailing on the water.
Hey thanks! We can’t wait too!! 👍
Ooh that woodwork is just stunning! So excited to see the rest of the build - both the van and the boat! Rock on guys!
Hey guys! Shouldn’t you be underwater? Divers man. What’s wrong with you all. Nutters.
Thanks for the support! Here’s hoping we do it justice!! 🤙⛵️
P.s we should make time for a catch up at some point!
@@SailHub Too right. We’re actually on passage right now so I’m filling my midnight watch with your content 🤩 So creative - you guys are awesome 🔥
@RedSeas 😂 cheers! Hope you don’t get nightmares! Fair winds guys!!
We are so happy for you both, Cant wait to watch your progress. Good luck lots of love Debbie, Clive and Murphy xx
Hey guys! Great to hear from you! Thanks!! Hope to catch up again in the water at some point! 👍👌⛵️
Jesus that's a beautiful boat, and the build quality is just stunning. Can't wait to see her under sail, I'll be following along.
Hey up! Oh man, we can’t wait either!!! 👍
As an owner of an aluminum Ex BOC Division 2 single handed masthead cutter, now sailed for fast cruising. I can say with experience of her I really like your FIND to my eye it is really well build and a great project to invest in. I think your very lucky to have found such a nicely build hull. your going to have lots of fun building and sailing her one day. SV Skoiern IV
Hey! Thank you so much! Kind works and great support! Thanks!!
Stunning woodwork, amazing...
Thanks Michael, much appreciated 👍
Man, I’d did a build in South UK OUTSIDE, and my hat goes off to you hardcore builders!
😂 yeah man, we will see what we’ve got ourselves in for when the snow comes in 🤦♂️🙂
I'm in... What an exciting boat, beautiful fast lines. What an amazing project.
Hi Kev, great to have you on board! Thanks!!
Wow. As a Swiss I a am so jealous about your project. Looks like an arctic dream boat. I wish you all the best with this peace of work.
Hey! Thanks fella! Fingers crossed it’s where we’re both hoping it is!!! !
Love the boat, and love your quiet positivity!
Hey up! Cheers! We’re so stoked about it! Super exciting!!! Thanks for the support! 👍😃
My favorite channel. You guys are just getting better and better.
Hey Andrew! Thanks mate, that’s so cool to hear! Cheers 🍻 😀🤙
Chris, Jenni, youve come a long way since BOAT STATION!!! Keep smiling guys
Mondo! Cheers lad, much appreciated!
We’ve done a lot for sure, like the rest of us I guess, thanks man!
Hope you guys are well fella!
My grandfather built boats for Camper Nicholson & I grew up in Hamble, so I’ve been around boats & yachts all my life. Absolutely love the craftsmanship & attention to detail you guys are putting into your projects. Chapeau 👏🏼
Thanks Chapeau, great to get a nod of appreciation from an experienced eye!
Cheers for that!
🙂👌
Woa, congratulations! After a few months of teasing, it finally revealed what the aluminium project boat is. The KM 39C is an epic hull. Well done! I am very much looking forward to your journey. Please share all you can. Thanks!
For sure we will be sharing it and thanks!
The journey has started with the van but we will try to keep the videos as boat orientated as we can because let’s face it.. we’re all boat people here!
Thanks so much for your kind words!!
@SailHub Yes!!! I recently bought the french Renault cousin of your german Porche a "Patago 39". It's less fancy but very similar also 1 of 3 that I know off. The plan is to sail it this summer back to Belgium for a major electrical refit this winter. I'd love to also gradually upgrade the interior over time. Your content and the knowledge you share will be very beneficial!
@XArthieX that sounds amazing.. just did some Googling, very different boats here but man, she looks ready to take on a war at sea. I dare say she will stand up to more than ours, looks like a really really good sea going vessel right there!
Sounds like a great plan too, be sure to let me know if we can help with anything, may even see you at some point, we will be driving up and down a bit and our ferry drops us in Amsterdam.
@@XArthieX btw, that’s no Renault more like a Hummer!
What a pair of projects, Looking forward to seeing them both progress good luck, 🍷🍷🍷
Love the look of the boat. And the internals look very well planned.
Cheers! We were super lucky!
Not sure what’s happening inside yet… first things first! Make the keel and get her home!
amazing mate. very exciting
Cheers man, super stoked! Can’t wait to get you and your grubby mits on her too!
Really looking forward to following your progress. Wishing you all the luck!
Hi Roger, thanks, it’s great to have you on board! 👍
Looking forward to seeing both projects as they develop!
Cheers Robert! Thanks for letting us know, great to have you join us for the journey!
I’m excited to go along for the ride with y’all. That boat looks super cool.
Hey Shaun!! Cheers man, stoked to have you with us and glad you like the boat! We’re pretty keen too 🤙 see you in the next one!! 😃👍
Having just rented a campervan for the first time (and loved it) - and searching for our first sailboat, stumbling across your channel on TH-cam is absolutely perfect. Looking forward to seeing your progression on the van and the boat.
Wahey! What a combo! Sounds like it’s exciting times for us all! 👍⛵️🚐
Here for the journey! Looking forward to series ahead..
Nice! Thanks👍
my brother and I been thinking about buying that boat too. my brothers crying tight know🙈good luck with the build. so happy you document the story😃😃😃
Cool, it’s a hell of a job, gonna be epic! Did you go and look at it?
Looking forward to this build of yours. This is the first I'm seeing and I'm already hooked.
Hey! Thanks for that, that’s great to hear!! 👍
Looking forward to this build ❤
Hey Don, thanks for letting us know! I hope you enjoy both of the builds and the rest of our content keeps you entertained too!!
Wow! Just amazing work!
Hey Michael, thanks mate!!
Congrats! and Best wishes.. Fair winds...
Thanks!! Likewise! Sails safe!!
Wow! Two very cool projects in the pipeline. Looking forward to the series. Best wishes🙏🏽💪🏽
Nice! Thanks, great to have you on board 👍
Uau can’t wait to see how great your van and boat will be! You are incredible. Take care my friends
Nuno! Cheers fella, means a lot. Thanks man
Found you for the sailboat, the van is a bonus !
Nice! I’m so glad you think so, we were worried it would have a negative impact.
Well done mate, you’ve always been naturally awesome at everything you turn you’re hand to.
Cyborg! Mate, how cool to hear from ya!
Hope your doing stonkin lad! Cheers man, it’s all about who we learn from 😉🤙👨🏭
Look forward to follow your projects with both the good looking sailboat and the campervan. Exciting and inspiring!
Love from Jonas S/V Mignon
Hi Jonas! Thanks for that! Stoked your joining the journey! 👍⛵️
Im in for the whole journey. this will be great inspiration! i wish you the best of luck.
No way! That’s superb👍 thanks for joining us and the support too!
Loving the journey and the goals.
We are on a low budget sustainable journey working towards a nearly fully electric refit of a 1977 Rival 38 centre cockpit ketch.
Brilliant! Now that sounds like a plan!!👍
Nice to find a KMY hull. They do terrific welds and you should get good documentation. Looking forward to seeing her grow.
Hey peter, thanks for commenting!
Yeah, your right there! They build fab hulls… as for the build, sadly we’re out on our own with this one!
Great video guys...looking forward to the whole series.
Cheers guys! Much appreciated 👍😀
I'm the first time on the channel and really excited to see the next episode. Huge project and I really like this switching between woodworking and metal craft in this video.
Ah thanks for joining! Yeah, there plenty more to come, can’t wait to get on with the van… we have so much planned for it but really I just want to get onto the boat! Great to get back on the tools again. -Chris
Lovely project! Love from the Netherlands
Cheers! And thanks for commenting!
When I saw this beauty on the thumbnail I knew we'd be in for a treat. Can't wait to see the whole project, van included.
I'm personally hoping to find a hidden gem like this but a cat instead. I'm sure I can learn a lot from your journey.
Ah thanks! Yeah, it took us years to find something that was right for us at the right price too. I’m sure something will come up for you, keep your eyes peeled and do t rush into something you don’t reply want!
As for learning from us… goodness, don’t put the pressure on! But on. Serious note, just ask if you think we can help, we’re on Insta too if you want on the job content.
Thanks!
Hey!! So kind, thanks you!!!!!👍⛵️❤️
Epic! Bring her to North Devon!! 😁
Oh yeah?! Is that affordable for us?
Adding this to the other 4, or 5 boat building channels I watch, because i own a plastic kayak 😂😂😂.
Looking forward to future vids
Hey! Thanks fella! Much appreciated. Man.. I have a strip planked canoe to finish building that you have just reminded me of. Gotta love a kayak mine, your all nuts!
Hope our videos keep you entertained,
The Spirit 72 is magnificent with fabulous wooden boat building skills. You've found a great boat, hope you can do your best work on it. As regards moving it, I would look for a suitable trailer even then the hull only is probably around 7 tonnes? Perhaps in the UK see what options you have to get it towed, there are networks where trucks move around looking for jobs, some people take an interest in moving unusual loads. Although the canals are probably the cheapest method, at least in Europe.
Hey Tom! Thanks mate, yeah the boat is great and we are really excited!!
The move has problems as it’s associated with moving through several countries. This outs the price right up there despite its weight of only 3.5T. The weight sounds good, and the shallow height too (no keel or rudders) but a beam of 3.8 that can cause the transportation problems apparently.
Basically all of the import export paperwork, time at several places on the journey pushes the price really high, so high that it’s just not an option. In fact it’s insane.
So, it’s going in the water! We have a plan now which is fab… We just have to implement it 😂
@@SailHub That sounds like a 'convoi exceptionnel'! With a beam of 3.8, perhaps she'll be on her side for any road journey. I guess it depends on your route to Scotland and your build site, would be easier under cover. A benefit of the lifting keel is that you don't need much of a slip or tidal range to get her afloat at end of the build, should open up more and cheaper options. The first leg to the canal/river sounds like the trickiest. I can't imagine Irish ingenuity, flexibility or accommodations in the local approach to the issue. I'm sure it will work for you.
@Tomm9y hey Tommy, thanks fella. It’s all coming together now, finally things are aligning and the van is taking shape too. As soon as we’re finished creating our new home on wheel we’re getting right into it!! Can’t wait?👊👍
Just subscribed, looking forward to your building the interior of the aluminium hull. What you did inside the van looks very promising.
Thanks John, great to have you on board, the vans coming on well. We will have a couple of videos on that soon.
Not sure what’s happening in the boat but I know whatever it is I want to test my skills a bit! The vans a great place for me to get inspired again!
Absolutely brilliant, what a find, well done, keep pushing and believe in yourselves. Top stuff.🇦🇺🐉 She's Magic.
Thank you so much! I love the believe in yourselves, believe me.. we needed to hear that! Thanks!
Such a sick boat
Hey up guys! Great to hear from you!!
Cheers, we’re pretty stoked mind. Mind you, we got a lot to learn from guys like you… gotta catch up again at some point! If you ever make it home that is! Given the survival suit I saw you in I presume your thinking of crossing soon?
@@SailHub that's the plan, we want to touch off the Arctic first though
@SailingYachtZora Get in! Mate. Amazing.
Great start to a new adventure! I'll be following along for sure.
Getting a bare hull from Switzerland to Scotland is an adventure in itself. I think you mentioned the French canals, but the Rhine is also navigable from the Swiss border at Rheinfelden all the way to Rotterdam. A 20hp outboard on an improvised bracket, plug some holes, a bit of ballast and away you go.
Best of luck from Pete in Wanaka, New Zealand.
Hey Pete! Thanks man, yeah… we’re in the same page mate! Probably because I used to live in the same town as you! What a place!
Thanks for the support!
Cheers, Chris 🙌
Wow... gotta see this! New sub - looking forward to the triumph, tradgedy and the drama! Well done, shes a beauty.
Cheers! Oh Lordy, I hope there’s not too much tragedy! All thought it’s bound to happen 😉🤦♂️
@@SailHub Well... there's always a little! Here's wishing you the best of luck on your prodigious adventure.
@spikeafrican8797 for sure! Cheers Spike, much appreciated 👍
Fantastic project!
Thanks! We think so too. A lot to take on and we’re super excited albeit a tad nervous here and there too…
@@SailHub Aluminum is a clear trend among leading youtubers. You bring something different within this trend. We look forward to learning from your woodworking skills, as well as your extensive knowledge of all the boating equipment. Van life is the cherry on the cake!
@@cyrilvermeil thanks for that Cyril. I hope we can deliver!
I think having been in the industry quite a while we have dealt with a lot and seen many views over the years. I don’t want say what’s best for who, just lay it on a plate for people to make their own descisions. There are reasons for all designs, materials and equipment and we intend to point out giver best usage along our journey. I guess what I’m saying is we want to remain factual as opposed to opinionated.
As for the woodwork, we will be doing all sorts of it in the future but the boat fit our probably won’t be what be expect! 😉…. What I know is that it will be a good test of my skills I’m sure!
TH-cam made a great suggestion at last! Nice project, I have an aluminium Koopman 35 from 1982 with wooden topsides and interior, no idea who built it though. Being in Spain the issue becomes getting materials and finding the skills to do the work I cannot do. Previously I worked for VT, Pendennis and ANT which took me to Blohm & Voss and Lurssens as a Marine Electrician / Electronics technician and having spent time working on a wide variety of small craft and super yachts I know good design and workmanship when I see it. I'm imagining your project will be a cross between Sampson Boat co. and Distant Shores, so my only advice is "Keep It Simple" as I can see you are already very quality minded.
Hi, how nice to hear this, such compliments! I really hope we can live up to this!
Sounds like quite the adventure you have been on! Koopman’s are just wonderful boats! Super lucky there chap!
As for our plan, we don’t really do simple, it’s just not in the genes… but, we’ve struggled to enjoy a lot of sailing for to working on things so this time we’re gonna make sure we get the sailing and traveling in. The quality can wait sometimes I guess!
Funny, the youtube algorythm suggested your video to me, probably because I am following RAN sailing. But I basically just got off the boat you took the measures of the keel from. We have sailed her from the Orkneys to Bergen in Norway. Congrats, she is ging to be a great and fast yacht.
Wahey! One of the Panta Rhei crew. So cool! I would love to hear from you and find out more about your Sail. Pretty epic! I wish I could have been with you guys! 👍
I've seen the ad for this hull online when searching for alu yachts myself. I am excited to see it on TH-cam and that you will document the built process! Really interested in your interior design but mostly happy it will be done by some skilled people. Often you see some weird or low quality interior when done by the owners themselfs which is a shame for such an expensive yacht. Best of luck with this amazing project and thank you for documenting the process!
Hey, thanks! We’re really looking forward to the build. I tho k the trick is to make sure we know what we want t before we start the interior. Great to hear you think we know what we’re doing! Time will tell 😂👍⛵️
So glad I found you guys. Love your design ideas and these are really cool projects. Can't wait to follow along.
Hey Steven, thanks mate! That’s much appreciated!
Wild project and crew, looking forward to learning while watching. SkipRay, the “Ark” project, Kerry, Ireland.
Cheers! May see you in Ireland some day! 😜
very good case, I looked at it a few years ago, but didn’t buy it because it was too far and expensive to transport. I will be watching your progress. Good luck
Yeah… there’s a lot to put anyone off on this one and it’s going to be a real challenge for us. We had looked at it since 2019…
super keen to watch how you get on and the decisions you make! were about to start an electric ali cat on a tight budget soon. love your channel as it is and now extra love! :D
Hey Pat, cheers for that! We should defo keep an eye on each other, sounds like we will have a lot we can learn together!
So exite.
Thanks! So are we!!
Glad I found this, lets get the Leo crowd over here since he has finished his boat now! This looks fantastic project and incredible project to follow. Great success! Subscribed!
Thanks for that! It would be well cool to get the Tally Ho bunch here!! Big shoes to fill mind!!
Let’s see how we get on with the van build as a taster! Next one’s up tonight, can’t wait to be on with the boat soon!!! 👍 thanks for subscribing!
This just popped up in my feed - I’m a uk-based sailor, occasional superyacht race crew, woodworker and Tally Ho patron - you guys got an instant subscribe!
@ianwatson4540 ahh! Cool, cheers for joining the ride! She’s gonna be a good one for sure! Hope you enjoy it 👍
omg . what a project !! you guys are amazing and what a beuatiful shape the yacht is to begin with !! and to top it of you doing another van build too , seriously amazing i would love to help , me getting an old 55 year old snapdgranod 24 engine running and sailing dont even compare am humbled lol
Thanks man, we’re all just faffing with boat here fella! It’s all the same and it’s important to help each other along the way so thanks for standing by us!
Subbed!
Wahey! Cheers Mr Mole!
Hi congratulations for the Alu boat. This one of Berckmeyer’s design which I am building now BM43 in Istanbul. It was on sale around 65k which I could buy but existing project soaks my cash😊. Good luck one of best designs in her class, 🤞🏻💞
Hey thanks! Yeah, she’s a beauty alright! Bm43 is a belter too! Are you documenting the build!? I would love to see it!
Hi, is it worth you trying to contact the designer, Martin Menzner from BM yachts. I would have thought he could supply the CAD file for the bulb. Mind you I had a very poor experience with him, so now going with another aluminium yacht designer. All the very best wishes to you for the completion of the BM. I will look forward to each episode with the progress. M
@helmsman141 thanks for the help, yeah we tried that as our first port of call…. Several emails, messages and no answer. Sadly we’ve not heard much good regarding communication from him which is a shame as the boats have a great sailing reputation. I got all of the CAD from Gaastmeer who supply KM with the cut panels for the build - they were super helpful.
Anyhow, we did some scans of the 1st German 39 and we have a CAD hero working on them for us, so far it look promising 🤞
Great to have you in the journey with us and thanks again! 👍
@@SailHub hi thanks for reply. I have tons of material to be posted but I have so many other stuff I only focus to finish the boat. I work 13-14 hours a day with two profies carpenter and paint guy. I am planing to start on posting on Instagram. I am following you, happy to share my experiences
@@SailHub I have 3D model of the torpedo for the kell actual weight would be 2300kg, maybe bit heavy for your project but if you need happy to send it.
Awesome
Cheers Robert!
Really interesting project - I have a similar boat (not ali) that was made by the last owner. I had a blank canvas too, but nothing like what you guys have in front of you! Best of lucjk. BTW nice camerawork/editing
Hey George,
Thanks for that! Rally nice of you and much appreciated. Btw we would love to see your boat and what you did, what is she.
8:29 this place is right next to where I live. That’s so funny!
So cool! What a place! We’re gonna be passing through again a few times so you best get the kettle on! 😀🤙😉
15 Grand to truck it🤯. I wouldn't do that either. Can't wait to see it in the water. God speed ❤
It’s crazy right, that’s the best price we got too and then there’s in the import export faff via road through Switzerland France Germany and the UK… Godspeed indeed! 🤙⛵️
Maybe not relevant, but I went fishing on a de-commisioned Brittish mine sweeper named the Admiral out of Morrow Bay.
All alluminum boat was the loudest vessel I've ever been on. Sounded like a city bus.
But I did catch 4 albacore in the 40lb range, so it was a win, but holy crap what a loud boat.
For sure, they are noisy as hell! We have a plan though, and we are testing it on the van, it’s the cork you see sprayed inside. It’s very common in metal boats and seems to work really well!
Sounds like an epic days fishing too by the way!
Love the hull hate the idea of electric cruiser , just go diesel make your life easier lol
Hey Rick, yeah your not wrong there! Check out our website.. it will all make sense! 👍
Killer Whale Proof this Beautiful SAILBOAT , Remember they have been attacking boat rudders !!
In your part of the Atlantic..
GREAT PROGRESS!!
Hey! Cheers for that! Yeah, we know all about those dammed whales! They are a real trouble!
Excited...😀
Cheers Barry! We’re excited too!
One consideration is to conclude if its saltwater aluminum, there were a lot of boats made without this rating that suffered fatal oxidtion/electrolysis issues
Good point that. She’s made of Alustar so we should be grand. 👍
An exciting & demanding project. I will certainly follow along.
I do hope you have worked out the tax implications of importing the boat from Switzerland. I know the can be pretty complicated and costly.
Good luck
Hey Bertie, great to have you join us! Thanks!
The tax…. Urgh… there’s a thing. It’s an open ended question, we’ve spoken to all of the relevant people who were actually brilliant. As in really brilliant. Basically we give them the price paid and pay the tax on it, unless of course they bekive I were taking them for a rid and then it’s to market value… I think that’s fair really, they have got to stop fraudulent behaviour 🤷♂️🤞
You could of made a plaster and glass mould of the other bulb ,25 - 50 mm thick would have been enough then thicken it up when you got home. this would have given it some drying time as well . i have made bulbs using this method before and it works . mixing the plaster and raw glass no resin just allow time for all the moisture to be gone . then place the mould in a sand bed for pouring . anyhow that's a great looking boat you have found , looking forward to see it being finished off. Cheers from a Aussie viewer living in Norway.
Great idea that! Wish we had thought of it 👍
We got by in the end with technology which is unusual for me! Still, it was a super cool learning process, fingers crossed it works out though! 👍
subbed you brave legends
Brilliant thank you. Might need your moral support through some of it. 🤣 Cant wait to get back out to Switzerland to get stuck in!!
WOW!!
Wow? Cheers! But I’m curious as to what gets the wow now!
There’s a boat builder in Australia , fabricating with aluminum . Yeh lots of boat builders, but the work they do is immaculate and fast.
They use spool guns, and simple tools. Work is first rate, and fast.
Tim Turtle ? Aluminum boat build time lapse.
Cool, great to hear. Thanks! Btw spoil guns are a brilliant invention!
Lauren Marine in Southampton is pretty cheap and being in Southampton has many marine suppliers just around the corner.
Now that is very helpful news! We love the sailing vibe around Southampton too. Thanks!
If I am not mistaken the hull was offered by KM some time ago, I recommended it to some friends. Interesting that it is popping up again.
Think carefully about where you want to continue building, transportation to the canals is also expensive.
I have built a Reinke 13M myself in ten years and a closed hall would save you a lot of time.
Try to make contact with a foundry to cast the lead, we were admitted there during the company vacations with a casting master.
Unfortunately, my advice sounds schoolmasterly; I can understand your enthusiasm.
Good luck in anticipation of further contributions, cheers
Hey, yeah your right… it was sold during covid and got layer up since, it’s a long story and we’re glad to be building her.
As for your advice, it’s not school master like, it’s dammed sensible and we appreciate it, a lot. So, thank you for helping us 👍
@@SailHub Perhaps one option would be to take the hull to the south of France, the option with the canals was formulated.
There is not enough time in Switzerland to work productively.
I have the feeling that your enthusiasm, which is conveyed in the video, will make the boat sail.
When was she made and why was she never finished? Love your work, the camper and the yacht.
Hi! She left the KM factory in 2019.
She was built for “German Yachtbau” who went bust whilst KM we’re building it. KM had to go through court to get ownership before they could sell it and basically it left the yard as a hull not a boat as they never had a customer for the boat - the customer was German yachtbau’s who I imagine left the scene when they went bust.
I'm really looking forward to seeing this project unfold. If you don't mind me asking how much was did the boat cost you? Wishing you all the best.
Cheers James, near enough 40k mate. Doesn’t seem a bad price to me but it’s not really a full hull yet.. The ballast has been the biggest shock so far, it’s more than the average rig! I’ve not made many keels to date and the price blew my mind. We’ve had foundry prices of 40k to cast the lead! And then there’s the transport and fitting on top!
Oooooo, nice. Once you're done, go into production. I'll have one. But with a gas guzzler please.
For sure!
Oh good a boatbuilding project.😀 So how are you going to power through the canals and to the fit out yard in the UK?
Hi, nice to hear from you, we’re not sure yet… a few ideas but we will need to figure it out properly closer to the time. We have a few maybe’s, I guess we just see what happens closer to the time. If all else fails I could strap a rib to it and posh the thing!😂🤦♂️
@@SailHub Yes indeed, it is a dilemma, an outboard would do fine for inland waterways but not so much for the ‘oggin around the U.K.
@normanboyes4983 to be honest I think an outboard will be fine for a while. I sailed a few boats with outboards, they are kinda cool in a simple way. We have so much to think about I think keeping it simple until we can figure something out properly is the way forward!
@@SailHub Absolutely. One is perfect for inland stuff but maybe two for the ‘oggin (the second could be smaller).
That’s sensible. Goodness knows where we will end up for the first part of the fit out mind.
How and where did you get your knowledge? University? Quality. I reakon your channel will blow up.
Hey! Cheers man, I hope so 😂 that’s would be well cool!
So I went to boat building school, but prior to that my grandfathers taught me, one a cabinet maker, the other a wood turner. I also build some race car stuff and mountain bikes in the past for fun.
Basically we’ve never stopped tinkering 😂🤟
Gr8 video I own the sister van to your green one. ☝🏽 Mc68
Hey up! Is it green too?! Tell me it is!!
@@SailHub yes lol MWB in Green. I believe these are Spearmint Green colour code
@dentalert haha! Brilliant! I love it!
@@SailHub same here.. if I had your skill I’d defo covert it. But at the moment it’s converted to a mobile vehicle accident repair van ))
@@dentalert great! Maybe you could take the dents out of ours then! 🤦♂️😂
I can attest Holyhead Marina has been good to me and its cheap.
Thanks for that! We were there a good few years back, cool spot! We’ve got good memories of rock climbing on Holyhead mountain too, I once took a good fall there!
Mind you… when it was wrecked a few years back that was the week after we left, crazy stuff! We do hope to be back there again for sure, nice to know the price is still sensible! Thank you!
Haha, you guys are doing something similar to myself. Currently I'm living in a VW transporter that is a working process (solar panels, LPG tank, water tank etc) until Spring. Then 2025 I will have the design for a more modernized Sheppard's hut, in which I intend to be the flagship for my own business and batch production.
Ideally in 2028-2029 I'm hoping to be able to see the financial gains to buy myself a catamaran or sailing boat. Let's hope.
Did you choose Scotland because the land is affordable when it comes to rent?
I live in the midlands, but see myself travelling back and forwards to mid Wales when it comes to assembly.
Great to be able to follow your progress 👍
Hey! Man, that’s epic! Good luck with all of that, I mean.. where do you even start! Brilliant!
As for Scotland, we have family there, when we get going we will likely need to be in the south as all of our partners are there… we best get saving! Kerchhhhhing!!!
@@SailHub I'm starting with many hours Infront of spreadsheets and in the library. If money is tight, possibly building a second campervan that you can sell, while you have all the equipment to hand (and the processes all fresh in mind). I'm sure you wouldn't struggle to find a buyer with all the following and make a pretty penny as a buffer before you get started.
One step back and two steps forward🤷
@terencebarnett9891 hey bud, thanks mate, that would be epic but sadly we don’t own the shed and we need to get out!
It’s no stress though, we will sort something, unfortunately TH-cam doesn’t pay much so we may take on some adverts to help pay the bills. The project demands a lot of time and finding time to work alongside it is becoming increasingly difficult!
Subscribed! Will make an interesting contrast to the Tally Ho build process, it looks like you have an amazing place to start from in that hull. It would be interesting to know the back story, if it's not too painful a subject for the original owner.
That’s a really nice thing to say, Tally Ho is an epic build!
As for the back story, it’s not my place. We we’re super lucky to have come across such an opportunity and the guys we bought of from was such a good chap, but we don’t want to rub salt in wounds here, let’s celebrate and do them proud, it’s way more fun!
P.s thanks for joining us too, can’t wait to get the van build and get on with the first jobs!
Looks like an amazing boat! Love the lines of the cabin. Is your van single or dual rear wheels? If it is single, be careful how much wood you add, or it may end up too heavy. Hollow panels can save a lot of weight. So far it looks really beautiful!
Thanks, we really like the look of the boat which is the bonus to what we expect her sailing characteristics will be!
As for the van, she’s a single. The ply is all lightweight ply and the curves I laminate are all lightweight too. Still, there is a lot of weight being added thats for sure. We will be careful, thanks for the advice it all makes perfect sense! 👍
Very nice project. Looking forward the the build! Put a wing keel on it. Lol!
Hey Mark! Thanks, so are we… I think, it’s all a bit exciting and somewhat overwhelming!!
Good call on the winged keel, we won the Americas Cup with one🇦🇺
@@seawench555 You were lucky. Lol!
@@SailHub You will be fine. Nice design! Baby steps!
@@tinkeringwithmark1186 🤣😆but we still won!!
Aluminium is the best! But, LiFePO4 batteries on average have energy density of ~120 Wh/kg. That of diesel fuel is almost 12,000 Wh/kg. So to replace one jerrycan of 20 liters = ~17kg of diesel, you'd need 1,700kg fully charged batteries. For that reason I have serious doubts if going for fully electric is wise; I'd go for hybrid (like Distant Shores) if you plan to make ocean voyages.
Yup, I presume you think we don’t know about energy density.
Our journey is to document the evolution of electric. In our eyes it doesn’t work yet and we intend to get as close as we can to making it work by building an ongoing prototype test bed.
We’re putting the reality out there for people to see so the fact is, we’ve got a something in common, your comment is exactly what we’re showing. It’s not the usual build and we’re thinking outside the box in every way possible to reach for better efficiency etc. it’s an interesting journey and to date we’ve just been planning the first year!
Anyhow, it would be cool to hear your thoughts as we progress,
Cheers, Chris
@@SailHub I'm not surprised at all you guys know 🙂 Yet, many people don't realise/know the immense difference in energy density, so I thought it was good to mention. Interesting journey. Let hope there will finally be a much much better battery; will be good for all of us. (For a 22k-subscriber channel, I commend you for responding and so quickly!)
@cornelisvanderbent8569 yeah the difference in density is catastrophic! It’s going to be a huge factor to overcome. Let’s see how far we get! 😬
We try to respond to comments as quickly as we can, we need people to help us shape our videos and channel, we’re right at the beginning of this and want to make it something with value for people. Only our audience can help us do that!
Hope to catch up again 👍⛵️
@@SailHub get the damn boat in the water and underway before grasping at pie in the sky. I successfully rebuilt a 36 ft motor sailer..... Take care of the basics first and have 5 times the money you think you need.
@JohnHoranzy hey John, thanks mate! 😂👍
Being shipwright I can completely see where your coming from here. We’ve been getting on with a lot over the last 6 months and we need to get the basics confirmed before we even bother making a start. We’re pretty much there now, just the van to finish off and we’re on it!
Interesting build Best wishes.
There was a Bruce Roberts designed (if I recollect correctly) aluminum hull in a similar state of completion near here. It was advertised for a few years. I don't know if they ever found a buyer. The fellows widow had it for sale. No motor, no mast etc.
Cool boats the Bruce Roberts, they are well sturdy sea vessels. This one’s a Berckemeyer design.
That's a really nice platform that you have to start with! How did you find it? I've seen you on Odd Life Crafting a few times. Glad that your getting a boat and a damn nice one at that. Looking forward to the fit out. Personally I would find the closest water and then motor it to the UK. You might be able to borrow someones trailer and tow it to the water. That would be ideal rather than paying a transport company. I'm about ready to build a Cyber 48.
Cool! Now there’s a build to watch! Epic!
We saw it years ago when KM sold it but it was out of our budget. After that I kept looking, I’ve wanted an aluminium hull for years now…. We were just about to set sail in our Najad across the Atlantic and a friend told me about this gem, I found it advertised online in German, I thought it was a scam as it was clearly the same boat I saw 2 years previous. Anyhow, we put our boat up for sale traveled to a field in the middle of nowhere and there she was.
We decided if we could sell our boat we should do it. Our boat sold in 3 days!!
As for the Odd life bunch, great guys! We’ve spent quite a bit of time together now, I’m really looking forward to seeing their project develop, we’re like carbon copies of each other with the van build too! 😂
Oh yeah, the transport thing, for sure although we don’t really have any friends in Switzerland… but that’s the plan, drop her in in Basel and up the canals… that’s should be comical!
Thats an insane price to ship that boat. I believe you could ship that across the US for $2-3k. Its not a very large boat hull and probably not very heavy. I guessing my Dodge Ram pickup would be able to tow this hull.
Your dodge would be perfect for the job. I’m told she should weigh 5T with the ballast on. The problem isn’t the distance, it’s four countries and the time taken for import export paperwork and finally putting it’s all on a ferry to our little island. Still, a frightening cost!