Can you help me regarding ultrasonic sensor it detect every thing if less than threshold distance unlike the video it only detects plastic and i am using Arduino uno for this project.
@@hobbyprojectHey we need help, what sensor did you use to detect metal, plastic, and paper, because I don’t really think that any sensor can do that. ASAP it’s for my project for this upcoming examination for my robotics class….thankyouuuuu
Bhaiya I have made this project but it's not working only proximity sensor detecting and soil moisture sensor not rotating the motor but showing variations on serial monitor plz help
![เจ็บที่ยังฮัก - ม่อน วรวิทย์ [ Official Mv ] จอนนี่มิวสิค](http://i.ytimg.com/vi/KALIGSRSjFs/mqdefault.jpg)
आशाने आपने क्या जोरदार आईटम बनाया है।
आपका एडिटिंग स्किल मस्त है।❤️❤️❤️❤️❤️
how much it costed ??
Great work 👏🏻
does your stepper motor have its own power source?
Can you help me regarding ultrasonic sensor it detect every thing if less than threshold distance unlike the video it only detects plastic and i am using Arduino uno for this project.
Settan pwliya 🔥
Can u please share the dimensions of the copper clad used?
Hello, please help me, what type of proximity sensor are you using, npn or pnp? No Nc?
Please greet answerr sir 🙏🏻
NPN type
did you use 8051 programmer?
Nop
Hello po! ano pong connection nung mga circuit na putol putol? san naka konek?
Project is to good , please share the source code
this is great
where did you connect your 12V supply?
Hello sir good day, can make video about of Plastic bottle and papers segregation or separation
bro can i know the circuit connection process
can i know how to detect plastic and paper please ? you didint mention it?
How much RPM should the DC motor have?
why we use ultrasonic sensor here...what its purpose..
They detect the plastic
I used Arduino as u give code and diagram of connection but it doesn't work .can u help
the program is failed to open in arduino ide software given in description
Pwedi po kahit breadboard lang kahit walang pcb po?
mas maganda kung Arduino ang gagamitin mo.
is it the same if i use arduino uno instead of atmega328 ?
Yes
@@hobbyproject do you have the schematic circuit for arduino UNO ?
does breadboard require?
Good job broi❤❤
what programming application did u use?
Arduino IDE
@@hobbyprojectHey we need help, what sensor did you use to detect metal, plastic, and paper, because I don’t really think that any sensor can do that. ASAP it’s for my project for this upcoming examination for my robotics class….thankyouuuuu
What happen with dry cardboard because mosture sensor work only with mosture
That's my problem as well... Any ideas how to get through that?
bro itha arduino uno la try pannalama pls reply
Sure you can.
👌💙🔥
how you segerating plastic and metal ....
Bro arduino uno la panna power correct ta varuma
Yes u can.
Isme coding bhi h kya
Cost??
How to use if on arduino board??
Which type of heat sink used
Do you have a block diagram for this?
Can we use Uno at the place of at mega
Yes.
@@hobbyprojectThe code source you shared at the description,does it also work for the Arduino?
Pls reply 🙏🙏
😍😍
Guys the code is present in the description only
wowww
Which algorithm is used here .
Hello po..tanong ko lng po pwedi po gamitin yung Arduino Uno sa project na to?need help po
sure.
@@hobbyproject pareho lang po ba yung program code na ginagamit sa Arduino Uno?
yes, same code for Uno.
Can you send me the code plz@@hobbyproject
Cost of making the same? 0:05
Bhaiya I have made this project but it's not working only proximity sensor detecting and soil moisture sensor not rotating the motor but showing variations on serial monitor plz help
WhatsApp me.
@@hobbyproject you have email?
@@mkikidarmawan1103hi
@@mkikidarmawan1103have you done this project
Hi there! Have you managed to fix the problems you encountered? We're having the same problems as well
Can a 9 the class student make this for science exhibition
bro can i buy it
Can we get some coding info in this project?
How to know the source of power of the DC motor?
Can it automatically turn off when there’s no trash?
what the purpose of heatsink ?
I need a block diagram... Pls add a link to discription
what material did you call in the brown one?
Which one ?
@@hobbyproject used in lcd display, its that pcb board?
Copper clad.
its okie if i used .. pcb board ..instead of copper clad ?
how did you put the code?
reply pls
Same dekh k bana sakte h
where did i put the heatsink ?
Can't access the code.please sent again
Use chrome to download and open it using Arduino IDE software.
Can I see the image how to try in pcb board
its okie if i use the arduino uno
Yes it's fine.
@@hobbyproject how to put the arduino uno in pcb board, it is the same coding?
what is that yellow board thing called?
Copper clad
You did not use raspberry?
What is the purpose of LCD display?
Total cost please
around 1.5k
The source code you shared,is it also applicable to the Arduino???
Pls i really need to know 🤲🙏
Yes
@@hobbyprojecthow to encode the source code into the atmega328?
Do you have a code?
Brother please upload its coding as fast as possible ______Humble request
Open the drive file and you will get it
Do you have it?
Please bro ma hatag nimo ang code ani for thesis namo ni little upgrade lng 😢
What specification of DC motor did you use?
12 volt >200rpm
Do I need breadboard in conducting this?
No need
Thanks but how can we get the arduino code
jiishnumm@gmail.com
@@hobbyprojectcode please
Can you please share the arduino program..
❤
"Could not create sketch " This error is coming sir . Pls help
9400496834 what's app
@0000 but code is not working
please help i made a model
The program is wrong
Progra opened but its wrong
This is invalid number. Is your code working ?
Brother I want Arduino cricuit diagram can you....?
What's app me.
@@hobbyproject your number please
9400496834
Can you please send me the arduino circuit
@@vidhyasreegopi5189 Are you boy or girl
Please give a list of the needed materials
And which app to code on
Does this project require coding?
yes
Where should we insert the code sir please let us know
it's better if you use an Arduino board.
Connection will be same for the Arduino board also sir
I need your atmost help to complete this project sir can you please help me with this please. 🙏🙏
jiishnumm@gmail.com
What is it sir
Please give the programming code
Isne janbuchke cide galat dala hai .code work nbi krta
Please share the source code for this project
how to cantact you?
Bro pls send pcb schematic if u r having
Circuit name
Bro I want arduino uno circuit can you plz send me
9400496834 what's app.
do you have the arduino uno circuit yet ?
Lbo will bay 200 rs. For coding and diagrams
How to program the ic
Use Arduino
Bro pls send pcb schematic id your having
Not able to open to the code
Download and then change it's format from .ino to .text.m or open using IDE Software .
Can you please give the code the link which you given is not available?
Download and open it using Arduino ide software.
Hi can I please have the arduino circuit
Hey, Check the description.
@@hobbyproject but sir the metal sensor, moist sensor, and servo, where to connect their other wires sir?
please sir I need your help for our research. Thank you sir
jiishnumm@gmail.com
@@hobbyproject I sent a mail to you sir thank you
Dipo maopen yung code😢
bro how to code atmega 328 ??
Bhai isme coding bhi h kya
You can use someone's aurdino board or you can do it by other way using communication pins
code need
Can you send the code please
Hey it's in the description
Has anyone successfully made this?
what use of heatsink ?
To avoid overheating of irfz44.
where did i put the heatsink .?
can I buy this project
Sorry , but If you are doing one I will surely help you.
How much did it cost you
Approx 3k
@@hobbyproject bruh can you pls make it for me I will give you 5k
I would have done it by myself but the prob is i am final year student and I have got too many things to do,i merely get time for anything
Project chi information please
It's in the description.
Bro how to open coding
open the file using IDE software or change its format from .ino to .text
Bro can I directly install it to Arduino board na
yes.
Thank u so much bro
Hi can send me the code?
May I see the codes sir
provided in the description.
Sir it will say that you don't have the permission
123 ibigay mo na
Please take me your arduino Source code
Code is not open
Use ide software or change its format from .ino to .text
How to write source code bro
Hey it's given in the description