Hi, I have some questions because I would like to do something like yours. 1. At 7:40 What is the orange board called? and what is the thing that connects to it on the right side called? 2. At 10:25 what is the small black thing on the top left called? and what we used it for? 3. Where? and how the micro servo move the lid? 4.What about the buzzer? Where can you put it? 5. And where do you put the ck converter? and how to use it? I didn't see that you use it. 6. On the description in the component part, what is WIFI esp-01? and what is it for? and where to put it? 7. Can you upload a new circuit diagram that has everything you included in the final look. Thank you for making this video it really help me out with some ideas. :)
Bro what are the pins connections for the soil moisture sensor 2 pins and does it requires a stepdown buck converter to work?? or will it work in 5v independently ??
It is showing error in last line of the code saying,....." 'distance' was not declared in this scope "...... Could please help in resolving this. What should I do? I would really appreciate it. Please Reply. Thank You!
@@keedo7780 Thank you so much @keedo. The code you sent got compiled successfully. But i have to use gsm module too so can you please send me the GSM module code too?? It will be really helpful for me! Please!!
Sir plz give the link for aluminium foil.... Where I get this foil...plzzzzzzz sirrr Just provide the Amazon link I didn't understand what type of foil has to be use........plzzzz sir it's urgent.....plzzzz replyyy
hello sir, Im using SG5010. it doesn't rotate when you code specific angles like servo.write(90). only accept sweep code , for example using for loop to assign value to angel. How to fix it?
Nice work sir thanks for this video this video helps me a lot in my oroject
Bro. Can i use soil moisture sensor instead of foil?
Good job
Thank you
Which wire you have used for connection? Pls tell @Sun Robotronics.
Hello, If a paper cup with a half filled teat/water is kept on the surface , where it will go?
Does sensor detect it as a wet or Dry?
Bro please what library did you install for the ESP wifi module? mine on flashes a blue light and goes back off. Thanks
What will happen if the rain comes...shall we put a design or lid upon these components or they require sun energy
The link u provided for code gives only circuit diagram,....code plz!!!
Can you please make vedio on how do we coding in Arduino
Yes, sir can you please tell me the coding for it? 🙏 🙏
So nice
Super Useful project. thank u so much 🙏
Bro please help us too🥺🥺🥺
Sir, gsm module konsa used kare please tell as soon as possible.... please sir.
Hi, I have some questions because I would like to do something like yours.
1. At 7:40 What is the orange board called? and what is the thing that connects to it on the right side called?
2. At 10:25 what is the small black thing on the top left called? and what we used it for?
3. Where? and how the micro servo move the lid?
4.What about the buzzer? Where can you put it?
5. And where do you put the ck converter? and how to use it? I didn't see that you use it.
6. On the description in the component part, what is WIFI esp-01? and what is it for? and where to put it?
7. Can you upload a new circuit diagram that has everything you included in the final look.
Thank you for making this video it really help me out with some ideas. :)
At 2:8 full circuit diagram
1. General pcb for power distribution all circuit
2. Dc jack for adaptor
We have to use laptop for giving input for it ??
Could you please tell me how much volt of adapter? I bought 12 volt adapter
hello sir, is that a normal cardboard you use for based and for segregation?
Where you had took these materials
Aurdino need to programed or nor
Hey sir does arduino uno need coding pls reply i want thi for exhibition
Please reply....
How much does your cost?
What did you put for moisture sensor 👌👌👌can you plzz say me
Aluminium foil paper
Hiii sir....I have a doubt.....can you clear.....in this video.....can you tell me the size of MDF boards
Bro what are the pins connections for the soil moisture sensor 2 pins and does it requires a stepdown buck converter to work?? or will it work in 5v independently ??
Step down buck give 3 Amp and circuit work properly 👍👍
@@SunRobotronics ok We will try thanks anyway
@@russelprudente2170Can we implement this project without GSM module?
Is this project come under iot
What is the purpose of segregating wet and dry?
If we put wet and dry things at a time will it separate properly sir?
No
For that , use conveyor belt model or image processing with dry wet sensor
Can we implement this project without GSM module?
Yes
Brother can you please tell me which library to include for servo as it is giving error for it
Check updates
I have same problem pls help me
Super thank youuu
What if garbage is combined wet and dry both
from where it's getting power supply?
Bro we can do without solor panels
Yes
Thank
suppose market se curry kharid k late hai aur wo polythene me dete hai....
to usko machine konsa waste decide karega?
Work without packing
How we can use aluminum foil as a moisture sensor??
You make simply probe ,u use simple wire or aluminium foil and conducting material
great logic
bro tumne code upload kiya tha wo kahan hide ho gya
Bbai mere ek dustbin banana h jisme homogeneous aur non homegeneous substance ko separate karna h bhai mereko plz bata do
Sir, can I borrow this kind of project? I badly needed this.❤
Thank you.
❤
Sir kitna kharcha lga plz bataeye?
Do you put dry and wet waste together in the Dustbin
that is the limitation of the project
Sir, what is a bug stick?
Sir can I borrow this project and ask for the code? I badly need this for my project. Thank youuu so much!
Hey, can I also borrow. I also need it for my project 🙏🙏
Sir Which servo motor used in this project
Sg90
@@SunRobotronics sir, is it SG90 Micro 9g Servo Nylon Carbon fiber Gears for RC Model???
Good explanation
But your code file and circuit diagram file was not open.
Plz see this problem
Ok
What's the threshold value u took for moisture sensor as analogValue() ??
which language is used in this project python/java????
@@apekshagupta4400 arduino
@@stutishah c/c++
CAN I GET CODING FOR THIS ADRUINO?
How much it will cost
Bro. What's the purpose of cutting the center of the foil? And can i use electrical tape on taping the edges of the foil?
Change things according to you 🙂
@@SunRobotronics how about cutting the center of the foil? What is the purpose of that bro?
How aluminium foil works as moisture sensor?
Use as a probe in two part
Sir, what are the dimensions of front and side?
How to buy this thing please tell me
Send your number, I'll call u
Thanks sir, but i found way to buy this
Can you explain this project
Which are exactly component used for this plz tell
Can u please send me the code????
Sir can we make this without ir sensor
Yes
how to order? I need this next week😭
Please contact sunrobotronics.com
It is showing error in last line of the code saying,....." 'distance' was not declared in this scope "...... Could please help in resolving this. What should I do? I would really appreciate it. Please Reply. Thank You!
Ok
@@SunRobotronics i will be waiting for your reply
@@SunRobotronics Please reply the solution to resolve the error. It will be really helpful and I would really appreciate it. Thank You!
@@nilaypedram6268 use this code:
#include
LiquidCrystal lcd(8,9,10,11,12,13);//RS,EN,D4,D5,D6,D7
#include
#define ir1 4
#define sen1 A0 // moisture
#define buzzer 6
#define trigPin1 A2////right
#define echoPin1 A3
#define trigPin2 A4 //// front
#define echoPin2 A5
long duration, distance,sensor1,sensor2; // us variable
int onetime=0,onetime1=0 ;
int wet=0,moisture=0,object=0,cabin2=0,c1=0,c2=0;
Servo myservo; // create servo object to control a servo
// twelve servo objects can be created on most board
void setup()
{
Serial.begin(9600);
lcd.begin(16, 2);//initializing LCD
lcd.setCursor(0,0);
lcd.print("Automatic WASTE");
lcd.setCursor(0,1);
lcd.print("Segregation sys");
delay(3000);
pinMode(ir1,INPUT);
pinMode(sen1,INPUT);
pinMode(buzzer,OUTPUT);
pinMode(trigPin1, OUTPUT);
pinMode(echoPin1, INPUT);
pinMode(trigPin2, OUTPUT);
pinMode(echoPin2, INPUT);
myservo.attach(5); // attaches the servo on pin 9 to the servo object
myservo.write(90);
delay(3000);
}
void loop()
{
moisture=analogRead(sen1);
Serial.print("moisture = ");
Serial.println(moisture);
delay(500);
//////////////////////////////////////////////////////
ultrasensor(trigPin1, echoPin1);
sensor1 = distance;
delay(10);
ultrasensor(trigPin2, echoPin2);
sensor2 = distance;
delay(10);
Serial.println(sensor1);
Serial.println(sensor2);
int lvl1=(16-sensor1)*7;
int lvl2=(16-sensor2)*7;
Serial.println(lvl1);
Serial.println(lvl2);
if(lvl1100){lvl2=100;}
lcd.clear();
lcd.setCursor(0,0);
lcd.print("moisture: ");
lcd.setCursor(12,0);
lcd.print(moisture);
delay(1000);
lcd.clear();
lcd.setCursor(0,1);
lcd.print("DL= ");
lcd.setCursor(4,1);
lcd.print(lvl1);
lcd.setCursor(8,1);
lcd.print("WL= ");
lcd.setCursor(13,1);
lcd.print(lvl2);
delay(1000);
if(lvl1 = 70)
{
digitalWrite(buzzer,HIGH);
}
else if (lvl2 = 70)
{
digitalWrite(buzzer,HIGH);
}
else
{
digitalWrite(buzzer,LOW);
}
/////////////////////////////////////////////////////
object=digitalRead(ir1);
moisture=analogRead(sen1);
if(object==LOW)
{
moisture=analogRead(sen1);
lcd.setCursor(0,0);
lcd.print("-GARBAGE SENSE-");
digitalWrite(buzzer,HIGH);
delay(150);
digitalWrite(buzzer,LOW);
delay(1000);
moisture=analogRead(sen1);
Serial.print("moisture = ");
Serial.println(moisture);
delay(500);
moisture=analogRead(sen1);
Serial.print("moisture = ");
Serial.println(moisture);
delay(500);
//delay(2000);
if(moisture>=40)
{
lcd.setCursor(0,0);
lcd.print(" WET GARBAGE");
myservo.write(20);
delay(5000);
myservo.write(102);
delay(2000);
Serial.println("wet");
}
else if(moisture
@@keedo7780 Thank you so much @keedo. The code you sent got compiled successfully. But i have to use gsm module too so can you please send me the GSM module code too?? It will be really helpful for me! Please!!
Sir plz give the link for aluminium foil.... Where I get this foil...plzzzzzzz sirrr
Just provide the Amazon link
I didn't understand what type of foil has to be use........plzzzz sir it's urgent.....plzzzz replyyy
Aluminum is also available in you kitchen
Share the code please there is an error in the link
Sir app ne isme wood ka paryog kiya he na
Yes card board
hello sir, Im using SG5010. it doesn't rotate when you code specific angles like servo.write(90). only accept sweep code , for example using for loop to assign value to angel.
How to fix it?
First check your motor
@@SunRobotronics is it different from sg90?
@@SunRobotronics what do I check on motor sir? I change my servo to sg90. Still not accepting specific angles but runs on sweep code
Can we implement this project without GSM module?
Sir ye poora model kitne me bna
Hello sir me Ek student hu 10th standard hu muji ye bana ne ka he to koe help milegi ?
Sir help mel te he to achha rahe ga plz sir
Yah tora hard lagta hai vase mene or be sab manaye he plz sir
Ans to do
How much does its cost for the code
Please can anybody tell what will be our power source for this project. And of how much VOLT the solar panels are used for this please answer. 🙏🏻🙏🏻
👍👌👍
Sir code available nahi hai kya karu code aur diagram mein sirf diagram hi hai main tension main hoon main ye bana raha hoon.
✌✌👍👍
Program kha h bhai
Sir I want coding of this
Can u share coding?
Sir can I get the project base paper and documents sir pls i want it
please im unable to download the code content
Bro send the codes of it. Its urgent.
Sir can u provide the link for the code
Ok
Where is the code sir
@@SunRobotronics code?
@@SunRobotronics code
Sir, Could you plz provide the code for this?
NO
Contact through WhatsApp
th-cam.com/video/8-YE5swHnak/w-d-xo.html
Chek comments
How much a normal person is suffering cause they r not taking garbage for 3 days.
Help us with coding of it
Sir how can the aluminum foil detect moisture???
Use as probe
Bhaiya Maine send kr diya hai pls send me coding
Sir pls help me with the codes
Link in the discription is not opening
Code open in Arduino ide software
Bhai Is project ka koi report he aapke pas?
Project ho gaya aapka?
Bcz i need help
Arduino board name
Bro please give me a code
Where is the code(program) for this
How does the aluminum foil act as a moisture sensor?
Please Try dear
Aluminum foil ma moisture sensor
which language is used in this project java / python??? plz help
Sir I'm a 8 class student.... Can I do this project?
Yes
I SUBSCIBED BUT WHEN I PROVED THE CODE WAS WRONG, I UNSUBSRIBED
WHEN YOU UPLOAD THE CODE IT TELL YOU SERVO DOES NOT MEAN A TYPE
@@kamugishaalex2877 can you please share the code. I badly need code
Bro code not working , pls updated correct code
attach libraries
Where is code bro???
Check description
sir code
Sirb
3000 approx
Bhai code?
check description
Code pleaze
Sir please give the code
Harddisk issue in My laptop please wait
@@SunRobotronics ok
@@SunRobotronics sir please give the code now
Sir plz code send karo
Ok
@@SunRobotronics ? Where it is
Software
Code???
check description
Thank you
Please send me a code
Send message on whatsapp
I have a message on instagram
What is the purpose of segregating wet and dry?
Can you suggest some interesting project topics which are not common and completely new plzz helpp 😅