2004 Honda Pilot Engine Mount
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- A quick video to show how to replace the front passenger side engine mount in a Honda Pilot. This is similar to other Honda V6 engines.
There are 5 engine mounts on this 3.5L Honda V6: passenger, front, two small transmission mounts on the left side and a rear mount. This video speaks to the front passenger side mount.
Created with Movavi Video Editor
www.movavi.com...
I changed mine last week, it's called the side engine mount. Ps, I didn't need to remove the bracket . I wiggled it out. Someone asked if the engine needs to be jacked up, I didn't have to. But just to be safe you can always have a jack ready under the engine. Good luck folks. I hope this helps
Agree, the engine doesn’t have to be supported, but I did anyway. Jack up to the oil pan with a wood cushion before removing the mount.
Did you need to jack up the engine before replacing the mount?
I did place a floor jack under the oil pan (with a piece of wood), but I only raised the jack until it touched. I did not lift it any.
Thank u broski😎👍🏼
How did you know that you needed this one?
It had the most movement when shifting between reverse and drive. I ended up replacing all the engine mounts a few months after this one. The side and the front do most of the work.
$80 a piece or set?
$80 (with shipping) for the Engine Side Mounting. It is the whole assembly. Honda part number 50820-s3v-a82
I am very late but where can I order honda parts I cannot order the mount that is in between the wheels unless I order it off eBay and I want the original part.
I order parts online from my local Honda dealerships, then pick them up. For some reason, this is cheaper than going to or calling the parts dept and ordering it
How much did those honda mounts cost you?
$80 with shipping