This is a "how to video" I put in my bookmarks for sure and watch while setting up switches and warnings. I have watched many of the Blue Falcon videos, and if followed correctly always work perfectly, as well as showing short cuts and tips. A huge Thanks for making these and helping promote our hobby!
it might be worth pointing out that the maximum flight height allowed in the US is 400 feet not 400 meters, a good warning number would be ~121-122 meters
I love your videos. You are the only person who has really taken his time to explain the FrSky Taranis X9D Plus. VFAS is not showing up as an option for me on my X9D Plus. I am using a FrSky XSR receiver. How did you add it to your options?
Hey man so I wanna flick a switch that tells me what my mah is... under special functions I have it play value fuel but it says the speed.?? How do I fix
yeah but all sounds seem to be for switch activated ones. i can do all sorts of those but cant figure out how to get my timer ending alarm to have a custom one.
Great video. I was able to use Taranis method to created sounds for switches, but when I tried Companion method I cannot find the WAV files in the drop down menu "Parameter". My hunch is that my SD card contains all the sound files but the Companion directory is missing sound files. Can you tell me how to verify this? Or am I missing some step? I am using 2.1.9 companion/firmware
I want to do the delay on the annoying low battery alarm but I realise when I do a punch-out with my quad I need to hear when the battery is struggling so I can ease off the power, I guess the answer is to assign a switch and try to remember to enable it before each flight, but if you forget....
Please help! I have added the VFAS special function switch on SH, but it's way off. The multimeter, the flight battery voltage display on the top line of the 1st Model screen, and the telemetry screen all show VFAS at 12.4 V (recently charged 3S). But the Special Function SH says 12.9V. Can't even charge that high. (Just sitting on the bench, not flying.) When flying it's anywhere from .5 to 1V higher, but that's a changing environment. Really messing with my OCD!
What does it show in Betaflight? The actual voltage or whats on your Taranis? If it matches whats in the Taranis you may have to calibrate it. th-cam.com/video/Lf_2dH7BjAw/w-d-xo.html
Thanks for responding! I don't know what happened, but I just checked to verify (I had done your calibration video already), and BF saw 12.3, Taranis model screen 12.3, taranis telemetry screen 12.3, mutimeter 12.3, and only Taranis Spec Fn SW announcement was saying 12.8, and today it's saying 12.3! I'll see if it stays in sync, and I promise not to bother you again (for at least a week).
Hey I was trying to create the alarm for the voltage value, and it didn't give me that option once scrolling through choices. That "vfast" option you chose for battery voltage. Do I need to download the custom sounds pack first in order to do this?
Hmm, so even after downloading the Amber custom sounds pack, I'm still not getting that "Vfast" option. Any idea what's going on? I've also updated to the latest firmware...
Well I got it to work, but it's telling me the voltage of my taranis. Of course my quad isn't on, so maybe it will tell me the value of it when it's plugged in, but when you demonstrated yours, it said 0 bolts because your quad want on...
How long did it take you to memorize all this stuff? I feel like I'm gonna have to watch these video each time I create new model. Great video and playlist tho man. Making things a lot easier for us slow folks! Just take it easy on the alcohol ;)
When you want to make a new model, if most of everything is the same then you can just go to a model you have already created, hold enter then choose copy model, then paste it. Thats all I do, saves a lot of time.
This is a "how to video" I put in my bookmarks for sure and watch while setting up switches and warnings. I have watched many of the Blue Falcon videos, and if followed correctly always work perfectly, as well as showing short cuts and tips. A huge Thanks for making these and helping promote our hobby!
I use this video as reference so often, can't tell you how valuable your channel has been to me, Thank You!
Wish I got the opportunity to meet you JC! I will be having many drinks in your name for the rest on my life. Rest easy brother!
"Rest easy?" Isn't that what you say when somebody dies? lol.
it might be worth pointing out that the maximum flight height allowed in the US is 400 feet not 400 meters, a good warning number would be ~121-122 meters
this is great M8, for those of us that don't do computer set up ,we can see whats happening here FANTASTIC M8
Dramasticly sounds good! I am going to have a drink too!
I love your videos. You are the only person who has really taken his time to explain the FrSky Taranis X9D Plus. VFAS is not showing up as an option for me on my X9D Plus. I am using a FrSky XSR receiver. How did you add it to your options?
Robert Habib Try discovering sensors. Unfortunately JC died, he can't answer anymore. 😕
Hey man so I wanna flick a switch that tells me what my mah is... under special functions I have it play value fuel but it says the speed.?? How do I fix
is there a way for me to create a sound for when i turn my motors on???
is it in logical switches?
thanks man! how can I change my timer alarm sounds? it only does one beep.. Id like to have a custom alarm tone
Yep. All sounds can be customized. Look in the Taranis playlist in the description and find the custom sounds video.
yeah but all sounds seem to be for switch activated ones. i can do all sorts of those but cant figure out how to get my timer ending alarm to have a custom one.
thanks for the vids you've helped me out so much
Great video. I was able to use Taranis method to created sounds for switches, but when I tried Companion method I cannot find the WAV files in the drop down menu "Parameter". My hunch is that my SD card contains all the sound files but the Companion directory is missing sound files. Can you tell me how to verify this? Or am I missing some step? I am using 2.1.9 companion/firmware
Helpful video!
1 question, is it possible to set STOP watch? using the trainer switch to turn on and stop when flit it again?
Can I set up vbatt warnings with XM rx.? Does it report vbatt telemetry ?
I want to do the delay on the annoying low battery alarm but I realise when I do a punch-out with my quad I need to hear when the battery is struggling so I can ease off the power, I guess the answer is to assign a switch and try to remember to enable it before each flight, but if you forget....
Please help! I have added the VFAS special function switch on SH, but it's way off. The multimeter, the flight battery voltage display on the top line of the 1st Model screen, and the telemetry screen all show VFAS at 12.4 V (recently charged 3S). But the Special Function SH says 12.9V. Can't even charge that high. (Just sitting on the bench, not flying.) When flying it's anywhere from .5 to 1V higher, but that's a changing environment.
Really messing with my OCD!
What does it show in Betaflight? The actual voltage or whats on your Taranis? If it matches whats in the Taranis you may have to calibrate it. th-cam.com/video/Lf_2dH7BjAw/w-d-xo.html
Thanks for responding! I don't know what happened, but I just checked to verify (I had done your calibration video already), and BF saw 12.3, Taranis model screen 12.3, taranis telemetry screen 12.3, mutimeter 12.3, and only Taranis Spec Fn SW announcement was saying 12.8, and today it's saying 12.3! I'll see if it stays in sync, and I promise not to bother you again (for at least a week).
Haha well thats just how it goes. And you're no bother bud.
Thanks for toturial 🤗
Isn't 13.8v way too low to run a 4S lipo?
THIS IS SO COOL! THANKS MAN
Hey I was trying to create the alarm for the voltage value, and it didn't give me that option once scrolling through choices. That "vfast" option you chose for battery voltage.
Do I need to download the custom sounds pack first in order to do this?
Hmm, so even after downloading the Amber custom sounds pack, I'm still not getting that "Vfast" option. Any idea what's going on? I've also updated to the latest firmware...
Well I got it to work, but it's telling me the voltage of my taranis. Of course my quad isn't on, so maybe it will tell me the value of it when it's plugged in, but when you demonstrated yours, it said 0 bolts because your quad want on...
Yup, even after plugging in the quad it reads off the volts of the TX and not the quad itself...
Any idea why?
is this mode 1&2? :D
How long did it take you to memorize all this stuff? I feel like I'm gonna have to watch these video each time I create new model.
Great video and playlist tho man. Making things a lot easier for us slow folks!
Just take it easy on the alcohol ;)
When you want to make a new model, if most of everything is the same then you can just go to a model you have already created, hold enter then choose copy model, then paste it. Thats all I do, saves a lot of time.
Project Blue Falcon
Aight cool. Good lookin out man.
Excellent! thanks!
Dramasticly is a fucking great expression lol
Thanks so much.
Thank you!!
RIP dude!
Skipped the JB video to watch the JC video. rip
Lol 400ft... aka 123 meters
Don't drink and record! :D
Nice video anyway. Thanks for it.
Haha. I was celebrating finishing final exams for the semester.
Bloody hell. What a waste :(
Raven Newbie FPV Agreed. 😔