making Electricity from a Homemade Wind Turbine?
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2021
- Build your own wind turbine and never pay for electricity again. Sounds too good to be true. Thats because it is. Watch me fail to test my wind turbine, because god turned off the wind for a few weeks.
you deserve so much more subscribers and likes, im not joking when i say im surprised your not more popular
Put it on a high pole and attach it to highest spot on your roof, and then wait for a windy day.
Instead of using a fan type windmill, you could try a drumbowl style windmill to better accomodate turbulent air flow.
Must build a tower, if your town allows such structure...
The tower for a wind turbine is half of the engineering challenge. I bought a 400 watt horizontal axis machine some years back for a cabin in the woods. Key word is 'woods'. Until it is above the trees and in clear air it can't fulfill its potential. It would work on a boat, or in a field, but thats not where I need it. Your blades look fantastic. Great use for hover board drives.
Nice video! Would be very interested to understand your calculations.
Greetings neighbour country :D Im from Czechia. Thank you so much for sharing. I always wanted to have a wind turbine but just like this video proves only big wind turbines are worth it.
Great video super cool Project I love your approach to the thing
Cool project and vid 👏
Using modeling technic for lightweight and economical wings, perfect idea, thanks for that! Btw, which speadsheet you are using for calculating chord lenght and angle of attack values?
The area of disturbed air flow is usally much longer than the hight of the object. You had significant effects of the surrounding objects in all shown locations. I would really like to see results in better location. This project is really impressive.
Great 👍
You should try a VAWT, with the coils and magnets on the outer rim. I don't believe taking power from the shaft is the way to go in real world DIY builds.
If the rate of the changing magnetic field is one of the multipliers; then... think low torque, and high speed. Therefore, having the coils and magnets on the outer rim of a VAWT.
very nice
what if u use big gear to drive motor with small gear isnt it more efficient on low air speed?
nice project. you can share the printed parts project ?
Hello, is it posible to get the stl from this project?
how to protect it from rain or fast wind. any solution
This could be used to charge an (cargo) e bike. I tested a 100W flexible solar panel and it produced 70W in full sunshine. Looks very cool but not very practical since one small shadow will let the mppt charge controller start to ramp up from the beginning. So its only usefull if you take a break.
So anyways great project, thank you for sharing and I am curious to see how it will perform with 10m/s of wind. I think 750W should be possible but anything above 250W would be great :)
Can't you put it atop a 10 meter pole stabilized by guide wires?
Nice. Do 3 verticals in a row with those hover motors.
5 blades will make the wind turbine turn at lower wind speeds, maybe that would help ?
nice video, keep it up
The pole it was mounted on should be higher
4:05 It's probably a bad idea to use a torch here. The neodymium magnets inside this piece lose part of their strength if you go above 80°C.
Try the steple on top the church
Can I ask stl file?
I have a larger brojen panasonic fan . It worjs the motor works.... the rest broke
Tiempo perdido
This would work fine if its just put up on a higher post or on a roof.💡
It would be funny if he made a bitcoin mining rig in the middle of the plains and used thesolarpanel to powerir
Очень интересно
Try beaches
Muito engraçado, deve ser muito feio para não querer aparecer no vídeo kkkk
VAWT......
Du bist 100 pro Deutsch
Way too low.
The pole it was mounted on should be higher