The switches from my video are similar but not identical. I don’t have the part number, i will try and find it but to get an exact replacement the switches will be white and black instead of blue and black. They can be ordered from “digikey”
Do you have a link to that specific remap film? I am just waiting for the l2/r2 video because from what I understand you cut off both r1/l1 n r2/l2. Unless there is a way just to do r1/l1? (Which I want to do)
NEW Playstation 4 Dualshock 4... www.amazon.com/dp/B01MRJBIZP?ref=ppx_pop_mob_ap_share You can do just l1/r1 you will need to just not cut the film and be extremely careful when putting your switch in place. Its taking me longer than expected to make the next video, being forced to work long shifts at work.
Do you know if it is possible to do this in addition to installing the Extremerate Dawn back buttons? Looks like both installations require new ribbon cables so wondering if that will be an issue
I think it’s possible. Basically you would just have to make sure the second ribbon cable lined up perfectly with the other one. Also there may be a way to actually solder directly to the Extremerate chip.
Do not bend the leads and do not cut plastic for it to just fall in. Once you do that it will not stay in place and it will move not good.
will this work on xbox controller?
Bruh I have been waiting for YEARS to figure out how to do this....
Where I buy this kit?
Man but didn't you cut out l2/r2 doing so? You have digital bumper, but no triggers right?
Also the switch was facing the wrong way needs blue needs to be facing outside not inside
Wowee you have the best controller modding videos. 10/10 would reccomendy MightyMouse over BattleBeaver
May I send you my controller an do this for me?
Are they direct replacement to battle beaver smart triggers
The switches from my video are similar but not identical. I don’t have the part number, i will try and find it but to get an exact replacement the switches will be white and black instead of blue and black. They can be ordered from “digikey”
Alguien me puede decir dónde puedo conseguir la Flex para remapiar botones
Do you have a link for the mapper
So it's the same process with the digital triggers but you have to add the extra switches and connect them to the mod right?
someone tell me in which part of the micro swich is the positive and the negative or does it matter?
Doesn't matter
Where did you get your wire? It looks like it is one solid strand
I’m using “wire wrapping” wire. It’s solid core, extremely thin and easy to work with.
I’m just gonna get a SCUF 😅 anyway I get paddles w it
Will this work on ps5 controller
Do you have a link to that specific remap film? I am just waiting for the l2/r2 video because from what I understand you cut off both r1/l1 n r2/l2. Unless there is a way just to do r1/l1? (Which I want to do)
NEW Playstation 4 Dualshock 4... www.amazon.com/dp/B01MRJBIZP?ref=ppx_pop_mob_ap_share
You can do just l1/r1 you will need to just not cut the film and be extremely careful when putting your switch in place. Its taking me longer than expected to make the next video, being forced to work long shifts at work.
You’ll also have to cut the rubber piece for r1/r2 l1/l2 in half.
Do you know if it is possible to do this in addition to installing the Extremerate Dawn back buttons? Looks like both installations require new ribbon cables so wondering if that will be an issue
I think it’s possible. Basically you would just have to make sure the second ribbon cable lined up perfectly with the other one. Also there may be a way to actually solder directly to the Extremerate chip.
Alright I am back and I finally! got the switches...
And It is complete. :) Regretting not using my hotglue gun to keep it in place but...god I will maybe do it another time haha
Nice, ya that international shipping can be a pain in the ass.
Thank you great video keep it up !!!
Now we shall do the ps5 :)
Where did you find the micro switches?
They’re M905 switches. You can get them off amazon, eBay or anywhere all over the Internet. They’re relatively cheap.
is $4.90 with $2 shipping for 5x of these m905s from china worth the price?
Definitely a good price. I order a pack of 2 for $6 from Amazon when I don’t want to wait for more
@@Miggy_Migg i am bidding someone on ebay 5.75 with $2 shipping for 10pieces :) hopefully
They make the entire button ribbon. That's already pre clicky......costs about 15$ This is way too much work
this is also over 4 years old. that kit you mentioned is much more recent