Hahaha...ganyan lang pala kasimple...mygashhhh 😁😂 pero huli na ang lahat ... pinukpok ko na piston sa inis, d ko kc matanggal dahil stuck up na sya. Papalitan ko nlang ng bagong set. Salamat. Mag-subscribe na rin lang ako para sa susunod na mga tips.👍
Another way to do it but pumping the pistons out with the brake pedal rarely fails to work. Just trap the first piston before it comes all the way out and the second one will be forced out.
@Juston K. If the fluid is only leaking slowly past the piston, pumping the pistons/s out should still work. It is the one way that works well but people seem to forget to try it before they disconnect the brake hose. Good luck.
compressed air, grease pump, use own car master brake pump, drilling and destroying the piston,......I have seen it all. And this brilliant guy's method is just common sense. Well done.
Ok, been struggling for 2 days gettins those damned pistons out with every possible tools available in a garage and this half naked guy in loafers pulls out this genius idea with barely any tools. Thanks mate
Dude, wtf, I was in the process of building some hydraulic death contraption to remove the pistons and then I've just double-checked youtube and found your video. It took me 1 minute to remove four of them. THANK YOU
Salamat sa info sir. Ng dahil sa vidio mo natangal ko din piston ng caliper ko, kakatapos ko lng gawin ngaun ung motor ko. Kung di dahil sa vidio mo di ko matatangal ung stock up na piston ng caliper. Malaking tulung tuh para sa tulad kung mahirap na walang pang paayos. Thank you sir💝
Wow! Good idea bossing. malaking tulong. ibaiba talaga diskarte ng mga mekaniko. try ko gawin din yan sa front caliper ko kasi stock up din yong isang piston nya. kaso wla akong socket haha. bili mona ako 1 set na socket wrench. di ko ipapagawa sa mga mekaniko baka gamitan nila ng plise or bisegrip. ako na gagawa kc 100% yong pinakita mong diskarte bossing.
Bossing ano magandang gawin sa caliper ko yung dalawang piston nag piplay naman kaso yung isa mejo matigas at hindi umaangat ng mataas kagaya nung isa tapos kapag nag pepreno ako yung brake lever antagal bumalik
Sir pano po b malalaman pg sira na ang piston po?kse ung sken kht ano po pump ko ayaw n lumabas ng piston ko po eh ☹️ beat fi v2 combi brake po motor ko po sir
Mate, you are a genius, struggled with this for two hours....sought inspiration from you tube and within 60 seconds had this sorted. Thank you👍.
Thanks mate😁👌
work smarter ka lods....galing ng technique mo...ito pinaka da best sa lahat ng nakita ku sa pagtanggal ng piston sa caliper...good job lods
Hahaha...ganyan lang pala kasimple...mygashhhh 😁😂 pero huli na ang lahat ... pinukpok ko na piston sa inis, d ko kc matanggal dahil stuck up na sya. Papalitan ko nlang ng bagong set. Salamat. Mag-subscribe na rin lang ako para sa susunod na mga tips.👍
Another way to do it but pumping the pistons out with the brake pedal rarely fails to work. Just trap the first piston before it comes all the way out and the second one will be forced out.
My pistons are leaking fluid. So this trick helps then.
@Juston K. If the fluid is only leaking slowly past the piston, pumping the pistons/s out should still work. It is the one way that works well but people seem to forget to try it before they disconnect the brake hose. Good luck.
Absolutely genius!
Struggling for two days with piston pliers without it budging. Used some heat and this method with alot of pulling. You legend
Thnks mate. Ride safe👌
Indeed brother
compressed air, grease pump, use own car master brake pump, drilling and destroying the piston,......I have seen it all. And this brilliant guy's method is just common sense. Well done.
Ok, been struggling for 2 days gettins those damned pistons out with every possible tools available in a garage and this half naked guy in loafers pulls out this genius idea with barely any tools.
Thanks mate
Thank u mate 🤭
😁✌️ thank u mate
Dude, wtf, I was in the process of building some hydraulic death contraption to remove the pistons and then I've just double-checked youtube and found your video. It took me 1 minute to remove four of them. THANK YOU
☺️ your welcome dude ride safe
damn you made it so simple I was going to buy special tools to remove it with air etc.. thanks
Salamat sa info sir. Ng dahil sa vidio mo natangal ko din piston ng caliper ko, kakatapos ko lng gawin ngaun ung motor ko. Kung di dahil sa vidio mo di ko matatangal ung stock up na piston ng caliper. Malaking tulung tuh para sa tulad kung mahirap na walang pang paayos. Thank you sir💝
☺️👌ride safe tropa😁
Salamat sir... Itatapon ko na sana caliper at bili bago... Buti nalang napanood ko to.
Great... 👍👍👍 Found my piston stucked today... Will try this technique later...
ikaw ang kasagutan sa aking katanungan.
salamat sa malupit na diskarte bossing
Yown galing ma try nga tagal ko na tong problem lods🥰🥰
Wow maraming salamat kuys ❤️ Ito Yung technique na hinahanap ko talaga Sana gumana sakin
☺️ gagana yn sa lahat paps.
This is an underrated video. Very well done, thank you!
Wow! Good idea bossing. malaking tulong. ibaiba talaga diskarte ng mga mekaniko. try ko gawin din yan sa front caliper ko kasi stock up din yong isang piston nya. kaso wla akong socket haha. bili mona ako 1 set na socket wrench. di ko ipapagawa sa mga mekaniko baka gamitan nila ng plise or bisegrip. ako na gagawa kc 100% yong pinakita mong diskarte bossing.
☺️👌 dapat bantayan ntin pag gingwa ng mga mekaniko ung motor ntin🤣 rs. Paps
Idol salamat sa video mo..natanggal ko na din sa wakas itong piston ng rear brake ko..nakasubscribe na ako idol..salamat ng marami sa dagdag kaalaman
Salamat boss...bibili n sana buti npanood kita
Ugh... been trying for 2 hours. Thanks! I'm gonna try this in my sandals!
Naipit na yung socket pano naman tangalin yun sa loob ng piston
Nice idol galing .hirap ako magtanggal ng piston sa motor ko..ma try ko din yan,.full support my friend..
Salamat paps☺️👌
Ang galing Ng technique mo sir.
Thank u brother for your tips its 100% worked ..live long life brother god saves u 100 year's ❤️❤️❤️
Ang galing galing niyo po sir. Maraming salamat sa tip.
Salamat sa idea boss yan rin problema ko kahapon lang...nice god bless
Thanks dude. I was looking for it.
Panalo. Galing.
Buti na lng napanood ko ito... Muntik ko ng ipalo sa kapitbahay namin tsismosa yng brake caliper ko akala ko wala ng pag-asa....😀😀😀
😂kung so maritess yn mas magnda 😂✌️joke
Boss yung pinasak mo na socket bka naman yun yung mas mahirap tanggalin
Strugle ka nia sa pag aalis ng socket sa loob ng piston hehhehe..
Galing mo idol sa idea mo natanggal ko nga salute to you!
Aus tropa😁 ride safe palage☺️👌
Thankyou 100 times, ive spent all day trying to get mine out but now I know.
Thank you sir☺️👌 just sharing my knowledge to others ☺️👌
Well done. Now how to take out the 2 nuts from the caliper piston?
hehehe hirap tangalin yan for sure
ang galeeeng... subscribed!
Thanks paps!! natanggal ko din sakin. 😂
Wc paps😁
Slamat idol... lupit mo...
Great technique 👍👍
Thank u bro☺️👌
Galing talaga tuts din po sa pano tanggalin ung nilagaya😭 diko matangal
Fantastic video works a treat. Thanks very much
Samalat master,malaking tulong to hehe
Ang tanung naman sir panu tanggalin ung mga nilagay mo po na socket wrench kasi para mahigpit ung pagka pasok ng socket wrench
Gantong technique ang dimo makikita sa ibang mekaniko.salamat idol
Salamat paps😁 ingat sa pag papagwa kc ung iba shortcut🤣
Nice idea thank you mu friend
BRILLIANT BRILLIANT BRILLIANT!! Thank you!
Your welcome mate☺️👌
subscribed! idol, ano puedeng gamitin pang tanggal sa kalawang sa piston?
Babad mo lng da wd40 then liha ka 1000 and 2000 okey na yn😊👌
Great
Perfect 💯💯
the problem now is how to remove the allen wrench and the socket wrench from the piston caliper.
Maybe just replace the piston
Bossing ano magandang gawin sa caliper ko yung dalawang piston nag piplay naman kaso yung isa mejo matigas at hindi umaangat ng mataas kagaya nung isa tapos kapag nag pepreno ako yung brake lever antagal bumalik
paano naman boss matangal ung sucket at allen sa piston diba nkasiksik un? ty
Pag nabunot ba yung Piston boss masisira na? Stuck up kasi akin baka pwede bunutin tapos linisin baka makuha sa ganun
galing mo brod😂😂😂
😂
Hello po. Magkaparehas lang po ba ang sparkplug na A7TC at C7HS na sparkplug? 😊
Very Cool Thank you So much Saved me hours
Very helpful, thanks!
anung size yung nilagay mo na socket dyan boss
You are a genius but please explain in English so we understand what you are doing
Sir pano po b malalaman pg sira na ang piston po?kse ung sken kht ano po pump ko ayaw n lumabas ng piston ko po eh ☹️ beat fi v2 combi brake po motor ko po sir
Ayus idol solido
nice lods galing ah
Thnk u lods☺️
Taena gumana nga, niceeee
Thank you my friend
So easy no grease guns and sir pipes.
ty lodss haha sobrang basic lng🤗👌
Rs paps😁👌
Excellent!!!!!!
sir paano po ba tannggalin allen? di na natanggal sakin
Galing :)
champion
Thank you bro!
Philippines?
Nice Idea
Panu naman tangalin na ak socket? Haha
very clever
does not work on my car
Galing mo
Salamat po😁👌
boss salamat.
npabilib mo rin mga kano boss
Salamat po boss .. ride safe sa atin👌
Location mo bro
It would be better this guy use a bench vise
👍👍👍⭐⭐⭐⭐⭐
Nagawa ko, kaya Lang Hindi ko matanggal ung nakaipit na socket 😁
San location mo?
shout out dun sa ga kinginang gumagamit ng pliers at vysegrip
Boos Yung Yung isang brake mo dyan sa baba diko Kasi natanggal Yung tornilyu nya
Alin turniyo paps?
Ang problema Pano na naman Tatanggalin Yang binaon Mo Sa piston ng Caliper? hahahahaha ang tigas Na nyan Ee haha
😂
Talino mo pre👍
Hindi po mariririnig boses mo poAa
Bkit sa kin pababa ikot ng piston
Paps ung pwersa mo dapat pahatak hindi pababa.. pag pababa gnun mangyyre☺️
@@ikabodbudwit ok na salamat
Petmalu
Salamat po☺️👌
Idol salamat sa video mo..natanggal ko na din sa wakas itong piston ng rear brake ko..nakasubscribe na ako idol..salamat ng marami sa dagdag kaalaman
Salamat din paps😁👌 rs plage