Fitting Bigger Wheels on a Ford 6610
ฝัง
- เผยแพร่เมื่อ 11 มี.ค. 2023
- Here's what happened after using the new bead breaker. I have never seen a tractor that looks good with small tires. It seems imperative to fit the largest tires possible on any tractor. Roughly, a 20% speed increase going from 30s to 38s. While we all like this rubber, a few of you seem bad at using the proper rubber when the occasion rises. lol
- วิทยาศาสตร์และเทคโนโลยี
![[TH] Esports World Cup : Point Rush Stage](http://i.ytimg.com/vi/eLU-jnYp3Zs/mqdefault.jpg)
![[LIVE] : ONE ลุมพินี 70 | คู่เอก "โฟกัส vs สเตฟาน"](http://i.ytimg.com/vi/_fVieQ89DRQ/mqdefault.jpg)
![[TH] VCT Pacific Stage 2 - Playoffs Day 2 // PRX vs GEN | DRX vs TLN](http://i.ytimg.com/vi/gmrSk-_ahlA/mqdefault.jpg)
Such a good sounding tractor, absolute music to my ears 😍
The 6610 is a great old workhorse one of Ford’s better ideas 💡great video as ever Jacob 👍😊
I like your Dad when he's chatting in the videos. He's got a good head on his shoulders.
11.00x16's on the front would fix it right lol
That’s a sweet running old Ford and it looks good with those bodacious new wheels.
Like it Jakob, glad you replaced the tiny front ones as well, it looks beefed up now, very nice
Looks great with the new bigger tires
All caught up been watching about an hour to get caught up. good to see what you had going on there Jacob.
Love the tires. Thanks for showing the Harbor freight tool looks like it did the job. 🧰😊☕
I'm surprised it worked so well
Wheels look good on the 6610. Good choice. Love ur videos.
I've got an early 1975 4000 and absolutely love those tractors, mine also has 38's on it and runs 17mph.
I've got a 5600 with dual power, and it had 16.9x30 tires on it when I bought it. It ran 16mph down the road , I put 15.5x38 on it with 10.00x16 front tires, and now it'll do 19mph down the road. So I gained 3 mph with the 38-inch rubber like you did. I'm glad I switched them out!
Tractor ready for some farming action. Good stuff
Looks much better with the larger tires.
Nice video. I have a 6640 and I put new tires on when I bought it 8 years ago. 18.4-38's. It rolls along about 20-21mph
The Ford looks good! I was thinking about doing that to my 560.
Wow, that looks great.
The look ....Oh yeah this hits me as a muscle tractor.
That makes it look good, now it needs some 16.5-16.1 tires on the front, aka big buns lol. We run those on 2 of ours tractors.
I had a 5000 that had been a selectospeed with 16.9-30's. It had a 8 Spd from a high crop 15.5 -38's. The slow rear from the selectospeed coupled with the slow planetary reduction from the high crop gave me a road gear less than 10 mph. Needless to say it got tailored everywhere. Great square baleing tractor though. It didn't ware you out at the beginning of the waggon hustling back and forth. 1st and 2nd gears were like creeper gears.
Now it just needs a couple pump turns and a turbo from a 7000/7600 and square fenders!
We have a 4610, great tractor
Good video.
She's a hot rod now
Jacob, I love how you broke down the size difference but i really loved how your Dad just eyeballed them and how accurate that was.
Fun to watch.
I might need to do this with my Dad and his Ford 3000.
Looks like you're going to drag race with it or hook onto the pulling sled.
It's torque-y and the governor is very responsive. It'd be fun to try a light farm stock class.
Looks like a pulling tractor with the small front tires on it.
Being ex-industrial I reckon it’s geared lower, mine on 13.6 38s was doing 17mph, now goes 23mph on 16.9 38s
I was thinking that was awefully slow for it. Good thinking on the industrial.
@@joshk.6246 on a standard ag model he should be getting 25mph with those big wheels
@@Sam6610 yeah. Thing looks like hes going to take it to the drag track 😃.
If you up in tire diameter size, you may watch out pulling heavy loads. May cause front to do a wheelie easier. Thought i give heads up on that
Would look better with newer Square cut rear fenders. But I like what you did. We have the same set up on a 7000.
Ford flat tops are hard to find.
@@boehmfarm4276 usually have to go new aftermarket. Otherwise you are wright. Hot commodity.
The colors are great RED WHITE & BLUE . This is still the USA some what .
Now it's a Dodge 6610.
Awesome job, repurposing one so others may live.
Finally rid of those goofy LCG front tires.
You may go down the road faster, but more in likely kill Your power, when
you put a load behind it. Red. white and blue.
Interesting
looks good :) just cut the exhaust pipe shorter then u'll fit anywhere..
My ford 5000 has 16.9-30 rear tires, it’s very slow on the road.
Looks great with the gleaner fronts. Paint em blue and it’ll look factory.
Probably go white.
A Regular 6610 should do about 17.5 to 18 mph on 13 x38
Do those fenders have any adjustment? If I were on that tractor I would like better if they were a few inches higher.
Good day from Ont. According to tractor data 6610 with 18-34 17mph. So u might be going 20 mph.
Thanks
Would love to find a set of 38inch wheels for my ford.
I had 16.9x38 on my 5000 with 7.50x18 front now you need a turbo
It's not out of the question.
If you still have all the construction style rims, would you want to sell them?
Careful if you grab the fender to hold on. You might loose a knuckle. Fenders look really close. Did the same to my 2020 Deere. Really made a difference. Had to make some risers for the fenders. Is that engine 3 or 4 cylinder and what hp?
Four, probably close to 70
👍👌❤🇨🇦
Is the 66 going on the square baler this year? Its my favorite tractor to drive lol
Probably, still have to fix the pto lever.
I'm here early. Now I'll watch.The county needs to fix your road.
That only happens when there's a pissing match between trustees being voted out of office and they want to burn all the money before they leave office, so they pave our road in cold Weather.
I bought a culvert and the county would never fix the driveway so we could get in and out of the field easily since we were not a large farmer
Used to drive a little Ford 5000, that thing would move down the road, handy tractor.
I don't know how you shift that thing when it's rolling. I can shift my Ford 3000 while moving really easy. But my Ford 5000 I can't shift even if I double clutch it. You think that's normal?
Nope, I can shift mine without double-clutching and without grinding teeth, shifts almost as good as a synchronised gearbox.
I can shift the little Fords clutch less on the road, haven't had enough momentum before with the 6610. But it shifts fine between gears nicely with the pedal. There might be a bearing going bad for your 5000 for the pto drive internally causing it do drag on your transmission input shaft.
@@ko1113 you have a 5000?
We’ve got a mfwd ford 4610. Seems to be about the same speed out of it. Ours is a 3 cyl, I assume this one is a 4?
Yep, 4
Any plans of adding a roll bar to it for looks?
I guess it won't be for safety then.
Yeah, been keeping an eye out for one.
@@boehmfarm4276well I figured if one got added it would be for looks before safety 😂
I wonder how fast the 1466 can go 🤔
Bout 20 probably
With Nick driving, probably 25.
@@boehmfarm4276 🤣
I know an 886 slightly adjust will do 26, a 544 low profile gear drive gas unit set to hydro specs will go almost 30.
@@billpollock1763 Thirty is moving on that tractor
You want faster road speed moving between all your hay fields? Or am I wrong and you use this tractor for something else.
It's a nice baling tractor. We have a 10' Ford disk for it too.
Where's Nick? Is he up for parole? Looks like you're ready for the tractor pulls.
Thats a nice looking tractor for it's age, and industrial life before. It would of probably been better with 15.5 38 or 16.9x34 tires on . Now it looks hot rodded up with tires you might as well find a 401 motor from a 8-9000 or TW and put in it, she'll be a real useful tractor then. A 150hp turbo motor really makes a Fordson Major lively L.O.L. Take care
Paint the rims white I think.
I thought about it, I really did, but I'm kinda ok with the blue center. I thought I'd hate it.
Big tires maybe to big and not get good traction. Have a good day.
Talk about circumference, it's getting harder to tell you and your Dad apart from when your back is to the camera.
Speaking of that clown Nick, what has he been up to we haven't seen it heard from him in awhile!?
Long story short, tractor theft and jail. Bandit or I will make a video eventually.
@@boehmfarm4276 o my!! 🤦
@@boehmfarm4276 Ooooh.......do tell!
@@boehmfarm4276 Nice...real nice...I knew he wasn't that bright,but what a dumbass.
Your girl bar is going to be higher up those tall tires will cut your power down done been there and done that didn't mean to burst your bubble