I like that they admit it can still be broken and that makes me trust a company more. I love seeing companies that say no one can break their pock! Not a plasma torch. Not an Infinity Gauntlet! Nothing!
Thank you! After a 9 hour drive home from vacation, I realized the key was 5 states away and I wasn’t unpacking until this hitch was off. I improvised and used a large adjustable wrench. It took all of 3 seconds to get it off.
@@russellatstupenas7354 not true I've seen thevies go through first a sheet metal wall then an interior block wall to steal cigarettes and they got away with a truck load but the idea is if they have to work for it or have better tools the its way less likely to happen. I was curious about these being worth it because when I've lost my key to my hitch lock in the past its taken no time to break it off so kinda a waste of $20 if these are really that hard to break they are worth what they are charging if you got a nice adjustable drop hitch
Do what I did. I just welded my Receiver to the hitch and nobody has stolen it yet,,,, but my Boss don't like me taking my boat to work everyday but I smile and tell him at least I still have my boat!
It's obvious that these aren't meant to keep someone from stealing your boat or trailer, but sometimes you would lose the cotter pin because it fell off or it would break off somehow, and sometimes you might find it missing because someone stole it or was playing games with you. These are good for preventing that.
Ironically, I broke my master lock brand one off the same way the other day (used truck, didn’t have a key for it). But I like that you broke your own product, showing it isn’t foolproof, just better.
Wow Sounds like someone got a new guitar and learned two cords and his buddy got a new set of drums for Christmas. Doing their first gig in the garage .
I'm convinced that there is no real security. I think the best idea might be to weld a square pocket to the side of your hitch just like they do for gates in the mountains. I've seen a few diabolical gate lock covers.
No, slightly less garbage than those other locks they have shown. And since this is an advertisement, those two are probably worst ones they could find.
@@junotfranco7197 But alarms are more annoying as most the times its the wind or a bird shit on the car. Most times people just ignore car alarms as they are so tempermental.
The selling point is thieves are shitty. The shitty part is we can’t have nice things without shitty low life’s trying to take it. Invest in a lock because the academy of thieves will steal what you work hard for
For that last one. Maybe carry a longer pipe to wiggle it back and forth a little so as not to deform it too much and it will slide right out after breaking. Probably cut that time right down.
I put a small weld on the nut that bolts my safety chain to the trailer. Then just use a heavy lock. Not fool proof but covers both the tongue lock and the pin
Yep. Gotta have redundant locks on all your stuff so that the gain ain’t worth the pain. Lock the boat to the trailer, the trailer to the hitch, lock one wheel of the trailer, locks the spare tire, lock the hitch pin, lock the tongue latch, duct tape all the locks with 10 layers of tape……
Couldnt find a pipe to fit over it. Put my lug wrench partially around it and gave it 4 medium whacks with a maul. Took 3 more good shots and it was free. 10 minutes looking for a pipe...30 seconds with the crobar...getting it off-PRICELESS
Thanks you save me for how to break my lock literally mine got so rusty that the key don’t work now using this it broke like 1 sec n now I don’t have the anti theft lock.
Dang I only used this video to break my old lock a few years ago when the key was 250 mi away. Now I’m looking for that unbreakable lock and watched the entire video to see it’s here!!
I did the same except I took a tap and threaded the hitch and reciver bar and ran the bolt through with a lock washer and nut and hit it with a air impact
I suspect that's how someone stole the spare off my F150. I had a cable lock too. Clean cut through both the cable lock and the cable crimp on the bracket holding the wheel. So far I have yet to find a secure solution that a sawzall or large bolt cutters can't break in just a few seconds.
IF the shaft is made of hard enough steel a sawzall won't have a chance at getting a bite, an angle grinder of course still could but that is a lot noisier and harder to get in tight spots.
I stressed and looked for my missing key today for over an hour, watched this video and it took me all of 10 seconds to bust off a Master Lock. Unbelievable, do not buy one of those locks, a scrap piece of pipe will defeat in in no time.
I lost my keys and one hit with a regular nail hammer broke my trailer lock loose. Locks ( on anything) only keep honest people honest. Even bank vaults don't stop real thieves!
I'm sorry your offended by my comment and fail to see the sarcasm in it. I have been using that comment for more than 20 years with nobody objecting. I guess after your comment I should stop. by the way that is more sarcasm.
I am with you Gary as I too use that statement....locks only keep honest people out...It doesn't mean honest people steal it just means if a dishonest person wants it a lock won't save it. People need to harden the shit up and stop calling political correctness for their pussy whipped arses.Cheers from Australia
@Cw Sayre Even "honest" people can be tempted and, so, become dishonest. The lock significantly reduces temptation among those who may, otherwise, be tempted who have rarely felt that way.
You could get the same effect with wrapping a thick layer of duct tape around the lock. 3" length strips.... repeatedly... till you get thick wall around the lock.
I don't understand a lot of the negative comments as any lock is intended to just be a deterrent. How many of you go to bed at night and not lock the door? I guess most of these people never lock anything up as they deem locks useless. The best lock is the one that takes the longest to break using the quietest tools.
Lock is seized with rust (still have the key) grabbed a pipe and bent it, the pipe. I need a steel one instead a bit of fence post, which must be galv. aluminum.
TH-cam algorithm at work again. I bought a BOLT hitch lock and receiver pin lock. People will pull the pin out of the receiver pin or release the latch on the trailer, just for fun, even though its dangerous they do not care. I put these on for my ease in unlocking (using the ignition key) and to prevent mischievous vandals. Flagged a guy down one day who was going up the on ramp. His trailer brakes were smoking. He had stopped at Walmart and then left. Someone had pulled the breakaway cable and set the trailer brakes, and he had not done a through walk around before leaving.
Do you drill out the key hole section of the lock? - I have a lock that the key isn’t working - the hitch has a bump step and there’s very little room to get almost anything but maybe a drill bit
the sound of that grinder wouldnt be obvious to other patrons at the boat ramp... lol I back my pin lock up with a lock on on one of the stay chains, which i upgraded to a chain much beefier than what came on the trailer... so you got 2 points to grind, taking you longer and attracting more attention.. happy grinding... lol
I have been watching these brake the lock, pick the lock videos and all i can say if someone is determined enough they will defeat just about any lock. So as someone else posted get a gps tracker with motion sensor that sends to your phone and when shit happens call 911 and grab your 12 gauge. No lock is impenetrable! So give it a rest. Ps insure you stufff....
As you've heard no doubt the idea is to slow them down (the thieves) or simply discourage them. An angle grinder with a metal cutting wheel is hard to defeat as is someone who is a good picker (there are very few locks that cannot be picked in a short period of time). But in the rural settings I most frequently play in I think that as a result of this multitude of lock videos I have what will be about as good as it can get without going to the expensive GPS tracker (and I don't have a smart phone). BUT I'm not going to advertise the technique I'll use. I want it to be a surprise.
just add a Walmart $15 cell phone and an ATT $20/3 months service (25 cents a minute but you aren't going to use it) throw a the phone anywhere in the boat or wire it in engine compartment to battery and hide it and you can use find my phone to locate your boat/trailer anytime. I used a breakaway trailer battery box, its plastic and when you run wires to it it looks exactly how a breakaway kit should look. Throw your phone into the plastic battery box ( CURT 52022 $5 on amazon) and you have a locate service way cheaper than the $30/month that the cell tracking companies charge.
The problem is that it wouldve broken in a fraction of the time, if they had made a legitimate attempt - holding the other end with the other pipe, so the breaker cold lever it back and forth. Never trust a security company 'testing' their own product against the competition.
Spring Bloom - My thought exactly. 1) why didn't they lever back and forth using the two pipes that they had with them. 2) The video is a MARKETING GIMMICK produced by the manufacturer or retailer to make their offering APPEAR superior to the competition.
This one slows them down a little longer and keeps the hitch quiet. www.amazon.com/gp/product/B00AC7VJCO/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
So if they all were inoperable in less than 5 minutes, why am I being bothered with a sales pitch for Bolt? It just took longer for it to break but same end result... Terrible sales pitch...
I dunno. I had a GMC Yukon stolen by professional thieves. They took the vehicle with no problems. I had a skull light in the receiver, locked with a basic Wal Mart hitch pin lock. When the car was recovered, the only thing intact was the hitch pin. It had saw marks, whack and whomp marks, but it was still there. I had my key, unlocked it, and am still using it 5 years later.
![[901] A Trailer Lock That I Would Use... Picked (Proven Industries)](http://i.ytimg.com/vi/xVtHiX12TVw/mqdefault.jpg)
![[901] A Trailer Lock That I Would Use... Picked (Proven Industries)](/img/tr.png)
![[1263] PacLock’s “Universal Cylinder” Hitch Pin Locks Picked](http://i.ytimg.com/vi/7kJw2lkVbZg/mqdefault.jpg)
I like that they admit it can still be broken and that makes me trust a company more. I love seeing companies that say no one can break their pock! Not a plasma torch. Not an Infinity Gauntlet! Nothing!
Thank you for the video.
I used a longer pole and it took me 30 seconds with about 15 lbs of pressure.
Thank you!
After a 9 hour drive home from vacation, I realized the key was 5 states away and I wasn’t unpacking until this hitch was off. I improvised and used a large adjustable wrench. It took all of 3 seconds to get it off.
I finally know how to remove the one that siezed up on me.
My key stopped working and after watching several videos this is the only method that worked for me to get the lock off
I must really be old! The opening reminded me of Gilligan's Island.
Your spot on. It does look like it.
Worked like a charm. My lock was the first one shown and was caked in salt. About 6 good tugs and snap!
Life saver!!!! Really recommend this video
Not sure why, but I really found myself rooting for those guys in the final segment!
Nothing stops a cordless grinder. If they want it they’ll get it.
unless you park in a desolate parking lot NO ONE will pull out a cordless grinder and steal your boat dipshit
@@russellatstupenas7354 not true I've seen thevies go through first a sheet metal wall then an interior block wall to steal cigarettes and they got away with a truck load but the idea is if they have to work for it or have better tools the its way less likely to happen. I was curious about these being worth it because when I've lost my key to my hitch lock in the past its taken no time to break it off so kinda a waste of $20 if these are really that hard to break they are worth what they are charging if you got a nice adjustable drop hitch
@@russellatstupenas7354 Right, they will use a reciprocating saw. Much quieter.
@@josephastier7421 you OBVIOUSLY know EVERY fucking thing in the world!!!!!!My BAD!
Do what I did. I just welded my Receiver to the hitch and nobody has stolen it yet,,,, but my Boss don't like me taking my boat to work everyday but I smile and tell him at least I still have my boat!
I bet the gas companies love you.
Thank you! I just did this for my rusted on lock. Took 5 mins max! Thanks
My locking piece is rectangular. Will this still work? What could I use that will fit over it?
It's obvious that these aren't meant to keep someone from stealing your boat or trailer, but sometimes you would lose the cotter pin because it fell off or it would break off somehow, and sometimes you might find it missing because someone stole it or was playing games with you. These are good for preventing that.
Ironically, I broke my master lock brand one off the same way the other day (used truck, didn’t have a key for it).
But I like that you broke your own product, showing it isn’t foolproof, just better.
Damn worked a lot easier than I thought thanks
What is yours is now theirs. Good reason to invest in a good wheel boot.
Hey hey, you guys are good. Sweet video
Wow! Fantastic that is one Great pipe!....FYI just carry around a grinder.
Wow Sounds like someone got a new guitar and learned two cords and his buddy got a new set of drums for Christmas. Doing their first gig in the garage .
No one puts their hard-earned songs on public domain. If the same band were to do a Dragonforce-esque song, you think they'd give it away free?
Who got the boat?
Wow, they were really targeting that one guy!
I'm convinced that there is no real security. I think the best idea might be to weld a square pocket to the side of your hitch just like they do for gates in the mountains. I've seen a few diabolical gate lock covers.
So the selling point is that one lock is slightly less shitty than the rest?
No, slightly less garbage than those other locks they have shown.
And since this is an advertisement, those two are probably worst ones they could find.
👌🏾😂💯
True but any car with a half decent alarm would have gone off at the tugging they needed to do for the last one.
@@junotfranco7197 But alarms are more annoying as most the times its the wind or a bird shit on the car. Most times people just ignore car alarms as they are so tempermental.
The selling point is thieves are shitty. The shitty part is we can’t have nice things without shitty low life’s trying to take it. Invest in a lock because the academy of thieves will steal what you work hard for
For that last one. Maybe carry a longer pipe to wiggle it back and forth a little so as not to deform it too much and it will slide right out after breaking. Probably cut that time right down.
Carry a short-length smaller diameter pipe to slip into the end of this first pipe to act more like a fulcrum or breaker bar.
So... How much for that pipe?
😂😂😂
😂
Many crooks are STUPID. Thanks for giving them a tutorial on how to rip off your boat. Just what we need.
Im getting me a new race car trailer now
Maybe a boat this summer
@@51-FS😂
Hide a GPS tracker in your Trailer.
Do you have a recommendation?
Spy tec. You'll have to pay a month to use it but works great.
I put a small weld on the nut that bolts my safety chain to the trailer. Then just use a heavy lock. Not fool proof but covers both the tongue lock and the pin
A softer bin is more likely to just bend instead of snap like core hardened steel which can only do one thing, snap.
All locks do is keep an honest man honest.
If someone wants your stuff and has a will, then there will always be a way.
Yep. Gotta have redundant locks on all your stuff so that the gain ain’t worth the pain. Lock the boat to the trailer, the trailer to the hitch, lock one wheel of the trailer, locks the spare tire, lock the hitch pin, lock the tongue latch, duct tape all the locks with 10 layers of tape……
Couldnt find a pipe to fit over it. Put my lug wrench partially around it and gave it 4 medium whacks with a maul. Took 3 more good shots and it was free. 10 minutes looking for a pipe...30 seconds with the crobar...getting it off-PRICELESS
Atleast you could've sent an Amazon affiliate link for that piece of pipe!🤷♂️😆👍
Lol
How come the camera guy didn't try to stop these two?, instead of just filming them. That's the real problem! Shame on you!
I AGREE ❗🤔👍😁🔒🔓🔏🔐🔑🔨🔗🇺🇸
Your joking right? It's all staged.
Camera man was the main instigator, making sure they did their job. 🤣😅😂😁
He was had to be in on it. Hopefully he’s brought to justice.
or just weld the hitch to the trailer and then unweld/cut it when you get home
If you have an expensive rig.... this is the right thing to do
If got a step hitch with the lock on it (no room for a pipe) - any ideas on how to break the lock?
Thanks you save me for how to break my lock literally mine got so rusty that the key don’t work now using this it broke like 1 sec n now I don’t have the anti theft lock.
Dang I only used this video to break my old lock a few years ago when the key was 250 mi away. Now I’m looking for that unbreakable lock and watched the entire video to see it’s here!!
I used a 5/8 grade 8 bolt at 150 FP
I did the same except I took a tap and threaded the hitch and reciver bar and ran the bolt through with a lock washer and nut and hit it with a air impact
Perfect! I used a sledge hammer... 20 seconds
Thor
battery powered sawz-all and a few seconds; done.
I suspect that's how someone stole the spare off my F150. I had a cable lock too. Clean cut through both the cable lock and the cable crimp on the bracket holding the wheel. So far I have yet to find a secure solution that a sawzall or large bolt cutters can't break in just a few seconds.
Yeah, I saw how to do that on another video! Guess these guys don't watch a lot of utube. . .
Nothing protects against a powertool, but powertools are also very noisy, a length of pipe makes no noise.
IF the shaft is made of hard enough steel a sawzall won't have a chance at getting a bite, an angle grinder of course still could but that is a lot noisier and harder to get in tight spots.
I stressed and looked for my missing key today for over an hour, watched this video and it took me all of 10 seconds to bust off a Master Lock. Unbelievable, do not buy one of those locks, a scrap piece of pipe will defeat in in no time.
Well an small Grinder cuts anything you know
I lost my keys and one hit with a regular nail hammer broke my trailer lock loose. Locks ( on anything) only keep honest people honest. Even bank vaults don't stop real thieves!
Lost my key. Great way to get it off. Thanks
The one that wont snap will cut easily. None of these had locks on the chain but chains can be cut as well.
@:24 I have those shame Adidas. HAHA
They also make a rectangular shaped locking ends so you can’t fit a pipe over it instead of the cylindrical types
Good trick. May be easier to stand on it?
I have one but sure wish it was better after seeing this video. I love the key convenience though. Locks are for honest people
Dear Mr. Gary, Not to be
offensive but, "locks are for" is
such a redundant, stupid
statement. Honest people are
"Honest", period.
Sincerely, NAWALT.
I'm sorry your offended by my comment and fail to see the sarcasm in it. I have been using that comment for more than 20 years with nobody objecting. I guess after your comment I should stop. by the way that is more sarcasm.
I am with you Gary as I too use that statement....locks only keep honest people out...It doesn't mean honest people steal it just means if a dishonest person wants it a lock won't save it. People need to harden the shit up and stop calling political correctness for their pussy whipped arses.Cheers from Australia
@Cw Sayre Even "honest" people can be tempted and, so, become dishonest. The lock significantly reduces temptation among those who may, otherwise, be tempted who have rarely felt that way.
you've got the right approach@@lazurm
Seems like an ad for the last one. took longest to break and after it broke the angle doesn’t let it slide out. Will be looking one up on Amazon
just get a longer pipe or bolt cutters for the ball lock.
Weld some flanges onto the hitch so the pipe leverage isn’t possible.
You could get the same effect with wrapping a thick layer of duct tape around the lock. 3" length strips.... repeatedly... till you get thick wall around the lock.
I don't understand a lot of the negative comments as any lock is intended to just be a deterrent. How many of you go to bed at night and not lock the door? I guess most of these people never lock anything up as they deem locks useless. The best lock is the one that takes the longest to break using the quietest tools.
Is there a difference if the boat is stolen in 10 seconds or 2 minutes?
Or even 5 minutes to just unbolt or saw the whole thing off?
To the criminal who risks getting caught the longer he's working on it, there is.
So what do i buy then
Wowzers. I have my key for the same type of locking pin, but I can't get it to open, even after lubing it with WD-40, no dice. Thanks.
Looking at locks but , ain’t taking this serious, I love how the guy pretends to pull as hard but just massages it for 2 minutes
Lock is seized with rust (still have the key) grabbed a pipe and bent it, the pipe. I need a steel one instead a bit of fence post, which must be galv. aluminum.
Lesson - use only the bolt designed for a pin. Drill bigger hole and use regular SS lock on it. 38 Smith&Wesson on side helps too
What kind of pipe do I buy
COOL THAT MAKES ME HAPPY TO KNOW I WON A FREE SET FROM BOLT LOCKS THANKS AGAIN FOR YOUR GIVEAWAY
TH-cam algorithm at work again. I bought a BOLT hitch lock and receiver pin lock. People will pull the pin out of the receiver pin or release the latch on the trailer, just for fun, even though its dangerous they do not care. I put these on for my ease in unlocking (using the ignition key) and to prevent mischievous vandals. Flagged a guy down one day who was going up the on ramp. His trailer brakes were smoking. He had stopped at Walmart and then left. Someone had pulled the breakaway cable and set the trailer brakes, and he had not done a through walk around before leaving.
Available here in OZ¿
Now do the demo with a longer pipe.
A hand held drill with good drill bit can defeat the lock quicker that the pipe. Best device is a GPS tracker.
Do you drill out the key hole section of the lock? - I have a lock that the key isn’t working - the hitch has a bump step and there’s very little room to get almost anything but maybe a drill bit
boy you have to carry every size pipe
Make one for Honda keys.
On the last one: the glaring ignorance of the easy-to-break ball hitch padlock. A pipe wrench would take care of that one a lot quicker.
I just bought a truck with a key hitch but the keyhole is rusty. I’ll try this method and get back to you
If you like, I'll open it for you.
I used a three foot crowbar.
I am just going to weld the trailer to the hitch, try and get that off.....
seems like the bent pin would not go through the hole
No one is safe from an experienced brain
A cordless reciprocating saw will zap right through one of those things in about two seconds.
Or battery grinder with fibre disk.
@@DannyB-cs9vx Yep
Noisy. Attracts attention.
Worked like a charm cant believe how weak it was
i'll try this on the hitch that came with my vehicle. the lock on the bolt didn't come with a key
Reminds me of gun safes. Just because they look nice, doesn't mean they are secure. The most popular brands are absolute jokes.
Element of Kindness out of sight out of reach I always say.
Was that a piano playing😉😉
Best way to prevent theft is to weld that hitch on and no pin needed.
Best advice with as a back up plan using good locks.
@1:20 he leaves finger & palm prints on the car
Battery powered grinder makes all 3 of these obsolete. But your lock is superior to the other 2 no question about it.
the sound of that grinder wouldnt be obvious to other patrons at the boat ramp... lol
I back my pin lock up with a lock on on one of the stay chains, which i upgraded to a chain much beefier than what came on the trailer... so you got 2 points to grind, taking you longer and attracting more attention.. happy grinding... lol
Easier to undo the hitch ball with a high-torque cordless impact...
Shhhhhhhhhhhhhhhhhhhhhhh. Goddammit!!
Too noisy.
Same 3sec as prying off a cheap hitch lock.
I have been watching these brake the lock, pick the lock videos and all i can say if someone is determined enough they will defeat just about any lock. So as someone else posted get a gps tracker with motion sensor that sends to your phone and when shit happens call 911 and grab your 12 gauge. No lock is impenetrable! So give it a rest. Ps insure you stufff....
As you've heard no doubt the idea is to slow them down (the thieves) or simply discourage them. An angle grinder with a metal cutting wheel is hard to defeat as is someone who is a good picker (there are very few locks that cannot be picked in a short period of time). But in the rural settings I most frequently play in I think that as a result of this multitude of lock videos I have what will be about as good as it can get without going to the expensive GPS tracker (and I don't have a smart phone). BUT I'm not going to advertise the technique I'll use. I want it to be a surprise.
Got a 5/8 bolt and lock nut for $3. Pipe ain’t doing nothing and good luck cutting it. Grade 8.
Can you elaborate on this? Is this just a bolt and nut? How would it lock?
@@CBCinJapan it doesn’t lock. But it’s not coming apart without the wrench’s. And it’s not going to get broken off with a little pipe.
I would have just taken the other lock! Duuuuuuuh
Locks just keep honest crooks away.
With good locks, add RFID chips in your property, means 100% recovery and prison time for the low life law breakers.
just add a Walmart $15 cell phone and an ATT $20/3 months service (25 cents a minute but you aren't going to use it) throw a the phone anywhere in the boat or wire it in engine compartment to battery and hide it and you can use find my phone to locate your boat/trailer anytime. I used a breakaway trailer battery box, its plastic and when you run wires to it it looks exactly how a breakaway kit should look. Throw your phone into the plastic battery box ( CURT 52022 $5 on amazon) and you have a locate service way cheaper than the $30/month that the cell tracking companies charge.
That pin should be made of rubber. No way could they break it.
Wow. The clock on the red lock was running 3 times as fast. How come?
They saved us the hassle of watching all that. Is my guess
Took me a whole 2 seconds to cut mine with my plasma cutter when it froze and I couldn't get into my trailer.
I WILL BUY THE THIRD ONE CUS IT TOOK A LONG TIME TO REMOVE IT, THEIVES ARENT THAT PATIENT, SO THATS THE BEST ONE I HAVE SEEN
The problem is that it wouldve broken in a fraction of the time, if they had made a legitimate attempt - holding the other end with the other pipe, so the breaker cold lever it back and forth. Never trust a security company 'testing' their own product against the competition.
Spring Bloom - My thought exactly.
1) why didn't they lever back and forth using the two pipes that they had with them.
2) The video is a MARKETING GIMMICK produced by the manufacturer or retailer to make their offering APPEAR superior to the competition.
Yep, send some to the LPL for a date with the Ramset.
LOL,shoulda used a longer pipe for better leverage for a quicker snap off😂
...or go to Planet Fitness 7x a week.
This one slows them down a little longer and keeps the hitch quiet. www.amazon.com/gp/product/B00AC7VJCO/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
So if they all were inoperable in less than 5 minutes, why am I being bothered with a sales pitch for Bolt? It just took longer for it to break but same end result... Terrible sales pitch...
In other words the steel is soft so you would be better off cutting it or picking it
as a macanit om not showing up with a pipe im showing up with a 15 inch crescent wrench and simply un bolting the ball
Raven Morse what's a macanit?
@HPJ Someone who works on cars because he didn't finish high school.
Raven Morse: I'd suggest people weld the ball to the hitch.
So i guess this was a commercial advertisement. ..
Do people really drive away with someone else's boat? Wouldn't they just get pulled over once it's been reported?
I dunno. I had a GMC Yukon stolen by professional thieves. They took the vehicle with no problems. I had a skull light in the receiver, locked with a basic Wal Mart hitch pin lock. When the car was recovered, the only thing intact was the hitch pin. It had saw marks, whack and whomp marks, but it was still there. I had my key, unlocked it, and am still using it 5 years later.
Cturkey chases dog
Turkey chases dog