Great tutorial on setting up your DJ equipment! I love how you broke down each step into easy-to-follow instructions. The visuals were also helpful in showing exactly where everything goes. This will definitely come in handy for anyone looking to get started with DJing. Keep up the good work! #DJtips #howtodj #djsetup
Great tutorial! This video helped me set up my DJ equipment quickly and easily. The instructions were clear and easy to follow. Thanks for sharing! 🎧💫 #DJEquipment #HowTo #Setup
Great video I learnt a lot. Please can you advice how you would connect a DLS-1000 to this setup…does it connect to the mixes and via the Link Lan connection.?
One thing you didn't mention, you need to set the CDJ player # BEFORE you connect the LAN cables or plug in any media to the player. Set the player # in the CDJ settings to the same channel you are plugging into the mixer. You'll know it's good because moving the fader volume of that channel should turn the platter of the CDJ red telling you it's "live".
Help please!! Question' when I'm using the crossfader my sound is coming out of the main speakers. Ive checked my connections but everything seems in place. I know this must be a basic error but can't put my finger on it. Just getting back into DJing after a long absence any help would by awesome. Thank you
I have a small set of DJ cd decks I have every thing but I don't know where the cables go properly it only has 4channel socket and just a little bit long from the 4 then U have 2 banana pin plugs go I think that 2;is outputs so where does the other 4 go into that line ones
Never touched cdjs and mixer in my life , and I'm about to go rent it, cdj and mixer 2000 nexus , is there something I need to know about wifi and routers type thing?
A noobie here with Xone 92 mixer but should be the same set-up when connecting to one studio monitor. So do I just plug in either Left or Right XLR output of my mixer into my XLR balanced input of my studio monitor (Adam A3X?) 1) I'm confused about how sounds will come from Left or Right side, or they will come as mono by default... 2) Is this something that I need to do on the Traktor software or on the mixer? Is that what mono button for booth section is? Thanks
Do I need a separate amplifier from the mixer or you just connect the xlrs straight to the PA? Same question if Im using turntables, I know it has pre amps in phono but still. Tldr does a mixer serve as an amplifier too. Stupid question but just wanna be sure.
i thougt that depends on the system. If you’re using active speakers you can directly connect them to the mixer. I don’t know how it works with an amp but i guess the same process. passive speaker to amp, amp to mixer
Great Video fella. Thanks. hope you can help with this. I am trying to broadcast a radio show from home so I do need to use both booth and monitor as I may need to turn the volume down in my house without effect the volume of the broadcast. currently I have the master volume acting normally but the booth has no effect. My speakers are connected to my amp and my amp is going to phono master sockets on my controller DDJ SR2. Any help is greatly appreciated. Cheers!!!
I have the exact same setup but with two turntables (technics and audio-technica) unfortunately when we moved and reconnected everything (exactly as I kept photos on exact connections to ensure it was repeated) the turntables stopped producing sound... Not quite sure what happened as the phono plugs were working just fine before and I figured that the mixer had a built in pre-amp or my receiver did. Any thoughts?
But what's the difference between using SPDIF > DIGITAL and just regular Line level with a CDJ for example? Is there a sound quality improvement when using SPDIF?
Excellent explanation. I'm about to start using a DDJ450 mixer with XDJ1000MKII's. I noticed that the DDJ450 doesn't offer a direct LAN connection. I just have a couple questions. - Where/what exactly should I connect the LAN cables to for the XDJ's? - How exactly would I get a quantized connection from the XDJ's to the DDJ?
halo i have spiaker mackie c300z rms, 300 watts - muzic.500 watts - peak.750 watts - I want to buy an amplifier and do not know how many watts it takes to ask if you can help with which amplifier should thenx
Please help I have a setup of 2 cdj’s 2000 with djm 900 and 2 jbl studio monitors Works great But when I added 2 Technics 1210 m5g i start having problem with my monitors When i play turntables master channel shows only one side of signal So as an example if i play left turntable only right monitor works And if i play the right one the left monitor works only If I include cdj’s into a mix both monitors works perfectly M I missing something? Anyone please
www.diffen.com/difference/Hub_vs_Switch With HUB: Collisions occur commonly in setups using hubs. With SWITCH: No collisions occur in a full-duplex switch. Hub's have no longer been used since 2000 :)
@@kimberleybarrett6752 you should use a switch with enough ports and enough capacity. You don’t actually need big capacity for this purpose. I would definitely suggest some 5 port ubiquiti like this one: store.ui.com/collections/unifi-network-routing-switching/products/usw-flex-mini. I am an owner of one and it’s good quality for the price.
Point blank? More talk than point blank connecting, Did not show the hub connected to the mixer! lol if your going to talk about other mixers then show it!
One of the best setup guide for anyone whose interested to learn setting up!
Great tutorial on setting up your DJ equipment! I love how you broke down each step into easy-to-follow instructions. The visuals were also helpful in showing exactly where everything goes. This will definitely come in handy for anyone looking to get started with DJing. Keep up the good work! #DJtips #howtodj #djsetup
Thank you for this useful and very explicit guide, I've just started today and wasn't sure what I was doing 😂
Glad you got something out of the video.
Wish we had dj schools like this in america
Best set up video for the CDJ 2000 that I've found so far. Thank you!
Very good explanation! Congrats!
Great tutorial! This video helped me set up my DJ equipment quickly and easily. The instructions were clear and easy to follow. Thanks for sharing! 🎧💫 #DJEquipment #HowTo #Setup
That’s one badass DJ Mixer!..great video btw👍🏾👍🏾
I love you so much right now. omg. ty. Stay blessed and safe. And your Mixer is Wow.
excellent explanation man, simple and in- depth, thanks a lot!
I loved the video, was useful. Thank you
LEARNED something very Important😀😀😀 GREETINGS from CABO VERDE ISLANDS🤩🤩🤩
Thanks, that was one the best explanation I have seen so far. Very informative and simple. Thank you!!!
Very Useful thanks❤
Thanks for watching!
Ben Bristow, you didn't explain how to connect the DJ console to a set of home speakers? Can you connect a console to an Amp?
Paul Smith well ima DJ but I still don’t know that
Great video I learnt a lot. Please can you advice how you would connect a DLS-1000 to this setup…does it connect to the mixes and via the Link Lan connection.?
Thanks bro 4 give a learn to how set a CDJ pioneer
One thing you didn't mention, you need to set the CDJ player # BEFORE you connect the LAN cables or plug in any media to the player. Set the player # in the CDJ settings to the same channel you are plugging into the mixer. You'll know it's good because moving the fader volume of that channel should turn the platter of the CDJ red telling you it's "live".
Great vid mate, thanks.
sir are u doing dj class on sri lanka
Sam how you put your mix properly for the DJ for the the gift in the weddings and night night clubs
Thanks for the video, How would I connect my Denon SC5000M Media players with a Numark Scratch mixer using JBL MKII Powered monitors.
Thanks
I have this exact set up and am looking to buy speakers. Do i need an amplifier and what for?
Woww,Thank you very much for this one!
Help please!! Question' when I'm using the crossfader my sound is coming out of the main speakers. Ive checked my connections but everything seems in place. I know this must be a basic error but can't put my finger on it. Just getting back into DJing after a long absence any help would by awesome. Thank you
I have a small set of DJ cd decks I have every thing but I don't know where the cables go properly it only has 4channel socket and just a little bit long from the 4 then U have 2 banana pin plugs go I think that 2;is outputs so where does the other 4 go into that line ones
Thank you sooooo much…! Great education…!
Im only using 1000’s though… Do I still need LAN…
hey just wondering how can i conect my Yamaha HS8S Black Active Subwoofer to my XDJ-RX2?
Do you need a lan hub for xdj 1000mk2?
Hi how do I connect my djm 2000 mixer to my bose lifestyle system for sound thanks
VEry usefull. Well done. Subscribed. Thnks
how to connect hybrid cdj's with laptop virtual dj8 please
Would you recommend the digital connection over using the other line? Cheers
Which LAN hub is that?
Never touched cdjs and mixer in my life , and I'm about to go rent it, cdj and mixer 2000 nexus , is there something I need to know about wifi and routers type thing?
nope
A noobie here with Xone 92 mixer but should be the same set-up when connecting to one studio monitor. So do I just plug in either Left or Right XLR output of my mixer into my XLR balanced input of my studio monitor (Adam A3X?)
1) I'm confused about how sounds will come from Left or Right side, or they will come as mono by default...
2) Is this something that I need to do on the Traktor software or on the mixer? Is that what mono button for booth section is?
Thanks
Hello I hv some dj equipment and I'm asking Yu if Yu can do a video on how to hook them up please
Is it okay to use balanced XLR input of my hs8 monitors to TSR on the booth of my DJM 800 mixer in stereo?
Do I need a separate amplifier from the mixer or you just connect the xlrs straight to the PA? Same question if Im using turntables, I know it has pre amps in phono but still. Tldr does a mixer serve as an amplifier too. Stupid question but just wanna be sure.
This is what actually brought me here. Lmk when you know whether an amp is needed
i thougt that depends on the system. If you’re using active speakers you can directly connect them to the mixer. I don’t know how it works with an amp but i guess the same process. passive speaker to amp, amp to mixer
Great Video fella. Thanks. hope you can help with this. I am trying to broadcast a radio show from home so I do need to use both booth and monitor as I may need to turn the volume down in my house without effect the volume of the broadcast. currently I have the master volume acting normally but the booth has no effect. My speakers are connected to my amp and my amp is going to phono master sockets on my controller DDJ SR2. Any help is greatly appreciated. Cheers!!!
i need explanation on how to hook laptop up into this setup...
Hey whats up bro i wanna play dj bEginner so which wiuld be best for me to set up and playing djs function
you are awesome ...
how to buy a dj set up......sir....
I have the exact same setup but with two turntables (technics and audio-technica) unfortunately when we moved and reconnected everything (exactly as I kept photos on exact connections to ensure it was repeated) the turntables stopped producing sound... Not quite sure what happened as the phono plugs were working just fine before and I figured that the mixer had a built in pre-amp or my receiver did. Any thoughts?
Can I connect a DDJ 1000 to a DJM 750 w/cdj 850s? Thank you.
Brother pls tell me your dhaka machine model?
Thanks, it was very useful...
perfection
Hi. When connecting your XLR cables to your mixer I have one that is red in colour, which master channel does it go into Left or right.
Thanks.
Cool stuff, thanks for sharing
Can you connect to speakers via Bluetooth
But what's the difference between using SPDIF > DIGITAL and just regular Line level with a CDJ for example? Is there a sound quality improvement when using SPDIF?
Using the SPDIFs eliminates clipping on the inputs. but more importantly it eliminates unnecessary steps of conversion :)
super helpful.
Please how do you do it on a mixars Primo i dont know how to turn it on
What is the age limit to join this university
What kind equipment has on video?
💯💯🙏🏾🎶🎼Thank🎙️U🎼🎶🙏🏾💯💯
Excellent explanation. I'm about to start using a DDJ450 mixer with XDJ1000MKII's. I noticed that the DDJ450 doesn't offer a direct LAN connection. I just have a couple questions.
- Where/what exactly should I connect the LAN cables to for the XDJ's?
- How exactly would I get a quantized connection from the XDJ's to the DDJ?
DDJ450?
@@N.n.i.k 400…
8:50 Guess the intro!!!
gang starr full clip?
And what things should i needed
how can get the beats
halo i have spiaker mackie c300z rms, 300 watts - muzic.500 watts - peak.750 watts - I want to buy an amplifier and do not know how many watts it takes to ask if you can help with which amplifier should thenx
Maybe I can help?
What are those black things connected into channels 3-4 but not in 1-2???😅
plugs to keep sockets clean...
Nice one
CROSS FADER A (R/L) CHANNEL - hurried explanation. Multi-setting hardware switch could be be further explained.
is there an app for me to locate my DDJ-200? i just lost it and its in my house cause the app djay detects it.
Did you manage to find it?
@@venn6556 ye (dis my second account)
Thx : )
Will this work with 2 technics sl 1200 mk2, 2 krk v6 and pioneer djm 600?
Great info, but I’m on a budget and working with Numark
3:24
3:30 money
stay in the red !
Please help
I have a setup of 2 cdj’s 2000 with djm 900 and 2 jbl studio monitors
Works great
But when I added 2 Technics 1210 m5g i start having problem with my monitors
When i play turntables master channel shows only one side of signal
So as an example if i play left turntable only right monitor works
And if i play the right one the left monitor works only
If I include cdj’s into a mix both monitors works perfectly
M I missing something?
Anyone please
Hi
I have a doubt about BA Honours
Should I complete my 12th grade in school for that
Or leave in 10th
If I take a three year course
Its a switch! I hope you're not teaching hub! there are a lot of differences. I doubt it would even work with a hub.
Greetings! Could you kindly advice me why this hub doo dah is no good & which "switch" to get pleas efor new cdjs ... thank you kindly :)
www.diffen.com/difference/Hub_vs_Switch
With HUB: Collisions occur commonly in setups using hubs.
With SWITCH: No collisions occur in a full-duplex switch.
Hub's have no longer been used since 2000 :)
@@kimberleybarrett6752 you should use a switch with enough ports and enough capacity. You don’t actually need big capacity for this purpose. I would definitely suggest some 5 port ubiquiti like this one: store.ui.com/collections/unifi-network-routing-switching/products/usw-flex-mini. I am an owner of one and it’s good quality for the price.
Use better cables. Don't have to be expensive audiophile cables, but anything between 30-100 pounds from atlas, audioquest, supra, chord,...
Stop randomly pausing my videos youtube
that is not gonna work for me a dollar is 7 liras (Turkish currency) so I'm broke
your saying di** not disk
So Complicated, prefer cds on stereo with proper speakers.. So easy..
Point blank? More talk than point blank connecting,
Did not show the hub connected to the mixer! lol if your going to talk about other mixers then show it!
this should be caled using lan and other crap other than what was titled what a wasteful watch