Honda BCLA, common Problems

In this video, i go over a few common issues with this trans, the main one is with the feed tubes, they must be updated. The part number for the tubes is 22770-RCL-305, when bad can cause shifting issues and even TCC codes. Thanks for watching, off to the shop..............Gary

[@chrislessner7661]

4years later and this video is still helping people out. Appreciate you brother

[@dereks9012]

Would the tube problem cause a harsh up and down shift between 1st and 2nd?

[@gboo9490]

Hey gary.Any suggestion on 722.6 at cruise 30 to 50 mph have vibration like speed strips until I give more Throttle.Change valve body checked clearance.Sent drive shafts out.also change k3 out.I never got rid of it.

[@juanmendoza9957]

Hi,Gary I have a mcla that's keeps giving me a p0756 solenoid b has delay on d and reverse then only shifts in 1 and 2nd for a bit until I turn the car off but it won't go on 3rd gear at all

[@aimhigh4928]

If you can put full assembly video together for the bcla transmission

[@JosePerez-fw1zj]

Thank you Gary

[@PecanPie1102]

Video in 1080 hi Def would be nice.

[@aimhigh4928]

Thanks for the reply we're great and but if you can do a full tear down and assembly video that would be great thanks again Gary

[@psicopatalucifer]

Thank you Gary excellent info.

[@CubasAutomotive]

Another jam packed video with great info! Short, but always so useful!

[@efrain99999]

Greetings my dear friend, first of all I want to thank you for your videos, very good and very helpful. I am having problems with the transmission of a 2003 honda accord 2.4 BCLA. This at the time of applying the second speed is neutralized. The first gear applies perfectly and, to be able to take the third gear, when the ECU sends it to second, I put the lever in N and then I pass it quickly to D. In this way the box returns in 3rd and then takes 4th and 5th perfectly. If I let the gearbox do its normal cycle, I get a fault code, P0752, which indicates "shift solenoid valve A stuck on". However, solenoid A has been inspected and works correctly and is within the patterns indicated in the manual, it even interchanged with the solenoid of valve B and the result was the same.

[@edwardcoates5011]

hi your vid is very helpful! ive rebuilt this bcla now, but cant get the end cover back on the case? seems to get stuck at the roller bearing. any trick to get this back on flush? thanks

[@joelperez2199]

Hey Gary, been following you for years . I’m a Honda tech , but we Don’t rebuild transmissions at the dealer .

[@ivanska3099]

Which solenoid activates the lockup clutch?

[@belloademola6733]

please what is the name of that broken filter, and or part number sir

[@donaldwinebarger8473]

Need tube part # nobody I tried has them.