Retrofitlab of course time 😂 I need to use the car every day so I've not so much time to work on the headlight and I would understand if an afternoon (like 4 or 5 hours) could be enough to complete the entire retrofit.
Hello, I'd like to know what kind of lens you recommend in this headlight, a 2.5" or a 3.0"? I'm not sure if there is enough space for the big one. Thank you
Bonjour, j'ai une Citroën C5 avec phare au xénon d'origine le soucis ceux si sont dans des optiques a surface complexe, mais moi je souhaite les avoir sur des lentilles, j'avais procéder ainsi j'ai mis mon phare dans un carton (mais je les poser directement dedans sans matient) j'ai fait un troue dans le carton pour passer le décapeur thermique et j'ai chauffé a 600 degrés pendant 16min, j'ai ensuite retiré mon optique du carton et malheureusement il a fondu là ou il est était en contacte direct avec le carton, mais ce n'est pas tout, impossible de retiré la glace (en plastique) j'ai essayer en fessant levier avec le tournevis mais il a peux de marge (peur de casser quelques chose) quand je regarde vos vidéo vous maîtriser sa sans problème est ce votre métier? Hello, I have a Citroen C5 with xenon headlight the original cares if those are in optical a complex surface, but I like to have on the lenses, I do so I put my lighthouse in a cardboard (but I ask them directly in without matient) I made a throne in the box to move the heat gun and I heated to 600 degrees for 16min, then I removed my optical cardboard and unfortunately it melted there or it was in direct contact with the carton, but that's not all, not removed the glass (plastic) I try spanking lever with the screwdriver but it can margin (afraid to break a few thing) when I watch your video control you without his problem is that your job?
Where you connect the angle eyes, into parking lights? And do you use a relay for the hight beam, because as i see the original bulb was h4 and at this bulbs, as you turn the hight beams, the low beams turn off, and at this point the xenon bulb will turn off as you turn on the hight beams. :) And again great work!! P.S. It's my personal view, but would it look beter if you ware paint the reflector black. Greatings from Bulgaria! You inspire me to do this in my home town! You are great, keep the great work you do!
-4:47/5:00 how did you remove that clip?? I dont get it...
I guess you "bake" the headlight to open it, how much does it takes to make it and remove all the permaseal? I know it's very difficult to work on it.
Retrofitlab of course time 😂 I need to use the car every day so I've not so much time to work on the headlight and I would understand if an afternoon (like 4 or 5 hours) could be enough to complete the entire retrofit.
Well done Retrofitlab
Hello, I'd like to know what kind of lens you recommend in this headlight, a 2.5" or a 3.0"? I'm not sure if there is enough space for the big one. Thank you
Can I buy these? Like a pre made set?
Please contact us on info@retrofitlab.com :-)
Bonjour, j'ai une Citroën C5 avec phare au xénon d'origine le soucis ceux si sont dans des optiques a surface complexe, mais moi je souhaite les avoir sur des lentilles, j'avais procéder ainsi j'ai mis mon phare dans un carton (mais je les poser directement dedans sans matient) j'ai fait un troue dans le carton pour passer le décapeur thermique et j'ai chauffé a 600 degrés pendant 16min, j'ai ensuite retiré mon optique du carton et malheureusement il a fondu là ou il est était en contacte direct avec le carton, mais ce n'est pas tout, impossible de retiré la glace (en plastique) j'ai essayer en fessant levier avec le tournevis mais il a peux de marge (peur de casser quelques chose) quand je regarde vos vidéo vous maîtriser sa sans problème est ce votre métier?
Hello, I have a Citroen C5 with xenon headlight the original cares if those are in optical a complex surface, but I like to have on the lenses, I do so I put my lighthouse in a cardboard (but I ask them directly in without matient) I made a throne in the box to move the heat gun and I heated to 600 degrees for 16min, then I removed my optical cardboard and unfortunately it melted there or it was in direct contact with the carton, but that's not all, not removed the glass (plastic) I try spanking lever with the screwdriver but it can margin (afraid to break a few thing) when I watch your video control you without his problem is that your job?
Can you buy a set of these?
Where you connect the angle eyes, into parking lights? And do you use a relay for the hight beam, because as i see the original bulb was h4 and at this bulbs, as you turn the hight beams, the low beams turn off, and at this point the xenon bulb will turn off as you turn on the hight beams. :) And again great work!!
P.S. It's my personal view, but would it look beter if you ware paint the reflector black.
Greatings from Bulgaria! You inspire me to do this in my home town! You are great, keep the great work you do!
Sorry for my bad english :)
omg i want this in my car .
but i dont know how to get t in the netherlands im not handy
It dont works with German TÜV!
Please see this link for more info: www.retrofitlab.com/blog/de/retrofitting-in-germany-e-mark-abe-and-tuv/