Arrma Talion VS Tekno MT410
ฝัง
- เผยแพร่เมื่อ 15 ก.พ. 2022
- Hey Everyone,
Welcome back to Thunder RC! In the beginning I go over my future plans for an upcoming Xmaxx video and talk about a future vid of the Team Corally Kronos XTR. The mighty Arrma Talion 6s VS the mighty Tekno MT410 at the skatepark! Both of these rigs have all the M2C beefcake upgrades and are built like tanks! Sadly the Tekno blows up another steering servo before I get to bash it. I put the 6s battery in the Talion and bash it like there is no tomorrow! Landing massive double backflips and crazy bump flips, the Talion wins this round with ease. Even the dog tells me that the Talion is the winer of this round. I eventually bust a shock rod end off a double bump flip attempt and head back to the house. I explain my frustrations with the Tekno and ask you all for advice and tips. Enjoy! #arrma #m2cracing #teknorc #rc #rccars.
P.S. Check out my buddies channel 3 Sons RC for more action on the Kronos XTR
That dog was like Eli Apple trying to cover Cooper kupp in the the Super bowl.
Check to see if your servo saver arm is hitting your servo mount at the end points and loosen the servo saver a bit. With the m2c chassis I had to dremel off a little of the servo saver arm to allow it to clear the servo mount. The tekno facebook forum has great info on this! Dont give up on the MT410 yet you will figure it out. Cheers!
5:20
Just love the new RC Dogs.✌️
Epic skatepark sesh!! These trucks are Awesome! Hopefully I can get out and bash tomorrow!
Yooo bro!? Get the outcast 4s please! I wanna see the upgrades from mitch and avery
Nice crazy run Friend 🤩 😁👋🇫🇷
Protek servo, that's the answer 👍 I haven't had any servo issues. Bummer though, it's frustrating.
:) trying to sellan xmaxx with 3 runs on it. So I can buy and build an mt410. Love the truck. Maybe ask the tekno forum for suggestions?
There’s some channel can’t remember it, but he’s having some kind of huge RC get together next summer. He’s building tracks and jumps on his property. It’s the dude that friends with Talbot. I think he’s a monster truck driver. That would be cool if he pulls it off for you & your crew to show up there
That’s weird man ide go back and check the electronics. Maybe the bec is fried and just sending straight battery voltage to the servo/receiver. Other than that my gamechanger build has been great. Running the M2c longer arm on the short hole. Got the saver backed off two turns. By the book they wanted three I think. I’m running an aluminum case power hd 30kg and it’s been a total beast. Tons of crashes and still good to go no issues. Your running the arm correctly. The servo gets flipped from the stock config. Tekno steering is so smooth I can’t for the life of me figure out why you’d be burning them up other than bad bec power source
Thunder, I wonder why that’s eating servos?! But you told me to buy the Talion and it’s been a blast!!!!! Your videos get better every time you post!! I’m proud of you bro! Stellar sends and trigger skills!! Loved every minute my man! 👊💯👍⚡️⚡️⚡️⚡️⚡️⚡️🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️
would you ever do a how to video on your tricks. like when/timing you hit the brake to front flip on the bump ramp, etc
The MT410, is just like shotguns, 410 is ok, a 12 gauge is better, Arrma talion. Thank you Rocky, I was jonesing for a good vid. ⚡💥⚡💥⚡👍✌
Every servo I ran inside my Mt410 was super old and already on its way out man😬 and those garbage Traxxas servos lasted me a whole bash which was a lot longer than I could have asked for using something with the name of Traxxas🤣 I hate to see you have some bad luck with the servo man, but if there’s anything I have learned is not every single upgrade is a good upgrade. While I love the m2c chassis I have found the reverse servo placement limits a lot of travel to the left unless you trim the servo saver. Even then it’s still not perfect. I guarantee you if I throw the stock chassis on it will fix this problem. Both trucks are awesome my dude! And I truthfully wouldn’t let something like this deter you from such a amazing platform.
Hi bro!). It's a pity tekno broke the server. What voltage are you applying to the servo? Maybe put a remote bec ? Plus the question of tightness ? She's a waterprouf, maybe moisture gets in? I am glad to see a new video! Keep it up!) I finally put my tekno mt410 in order. There were problems with the central differential, and I was also waiting for the 6s backflips :)
Arrma to the rescue! 👍👊😋😎
My man had enough of the m410 lmaooooo we all been there with a rc thats usually held in high regard. Talion looks sharp 👌
Cute puppy wanted to turn your Talion into a chew toy 😁🤣😂
I love your intro bro, it was a beautiful fight that will be executed!