@@bobolulu7615 sadly not part of my job. I was just one of many designers and our client wasn't the car manufacturers themselves, but ThyssenKrupp (mostly) who was responsible for full functionality. If something didn't work, they requested specific adjustments in models and drawings. In case someone had to discuss the project in person, it was management or project leaders.
At one point we see the rear door on, and then at the end it comes off the line with all doors installed. Can anyone CONFIRM that robots are installing the hinges and then installing the doors? Are are the doors just in a temporary position to be installed manually elsewhere? Thanks2
Can anyone help explain the below queries? 1. @2:54, what is the method of inspection for sealer? 2. @5:05, robots pick the BIW and rotates it 180 clockwise and then again 180 anticlockwise... Why? 3. What is the gripper at 5:37?
For sealent detection most probably there might a provision of vision system somewhere above the dispenser Robot rotate the full body ...its probably an a measuring station where critical point are being checked with camera system Gripper is door fitting jig it check the flush and gap within tolerance
@@abajidhage5262 Thanks for the info. but regarding my 3rd point, I still have doubt about the robot's functionality which goes through the front windshield @5:37, as the image is not clear.
The majority is Spot welding. There is also some Mig welding and BMW uses a lot of adhesive in place of welding. All three methods are seen in this video. I used to work on those lines in that plant.
Walter's Guides how? Which process specifically? How would you "optimize" it? What would It cost to integrate said opt? Please, dont leave us wanting , say what is and can be done....
![เจ็บที่ยังฮัก - ม่อน วรวิทย์ [ Official Mv ] จอนนี่มิวสิค](http://i.ytimg.com/vi/KALIGSRSjFs/mqdefault.jpg)
I have designed many of those welding stations, never seen them in person. It is fascinating to see it in action at least on video.
Hello, I actually have a project on this welding workshop and I wonder what are the recommendation that you think it's should be focused on
Why have you not seen them in action? I would have thought that part of the project would be making sure your designs worked?
@@bobolulu7615 sadly not part of my job. I was just one of many designers and our client wasn't the car manufacturers themselves, but ThyssenKrupp (mostly) who was responsible for full functionality. If something didn't work, they requested specific adjustments in models and drawings. In case someone had to discuss the project in person, it was management or project leaders.
ABB Robots are wonderful.
At one point we see the rear door on, and then at the end it comes off the line with all doors installed. Can anyone CONFIRM that robots are installing the hinges and then installing the doors? Are are the doors just in a temporary position to be installed manually elsewhere? Thanks2
Are these resistance spot welding??
In the future the machine will create all products... For People without work that not buying them...the system will collapse early...
Sir , do you have any work for me ?
No
Which type of welding is used
🏢Anupam kharwar
Spot welding
Ultrasonic spotwelding
Chinese team working for BMW gr8 !
Hoi
truly amezing
Now what we need are robots that will buy cars and stuff.
Nice
Very nice factory BMW
Hi
@@shyamnaiksuknavath9476 Hi!
Good morning
Vacansi hai kya
How to eliminate labor unions...
That’s why foreign manufacturers largely put their US manufacturing facilities in the south. To stay away from UAW.
Naimmazarzehi
Naim
I am machacine for moer vedio
Jan aramani
i am before working proton.very ricks work....malaysia
shofiqur rahman welder..hero tak didendang
Thanks
Skd
mast
nice
most very tecnology nice good
nice video
Wow
Amazing video
Ss Yadav
Krishna
Supper
السيارات الهيكليه مهما كانت مواصفاتها فهي غير مجديه من ناحيه المتانه والرزانه في الشارع الياباني القديم والالماني القديم فقط ثبت جدارته في الشارع 😢
محمد العراقي stuff
محمد العراقي g
مافي مقارنة في السلامة الجديد افضل بمراحل
I
Maine work kra Hai puri line per underbody white body main body
Can anyone help explain the below queries?
1. @2:54, what is the method of inspection for sealer?
2. @5:05, robots pick the BIW and rotates it 180 clockwise and then again 180 anticlockwise... Why?
3. What is the gripper at 5:37?
For sealent detection most probably there might a provision of vision system somewhere above the dispenser
Robot rotate the full body ...its probably an a measuring station where critical point are being checked with camera system
Gripper is door fitting jig it check the flush and gap within tolerance
@@abajidhage5262 Thanks for the info.
but regarding my 3rd point, I still have doubt about the robot's functionality which goes through the front windshield @5:37, as the image is not clear.
@@abajidhage5262 bro can i know what is Jig.
Very good
Good
Iam bangladeshi
IAM mechanic
I want to work in you ar garej
I want to work with you as a mechanic
very good
Vecancy hai kya
super
Very nice
My Cosmos.
Armando Enriquez
cosmos? haha
Rare
Pardeep
Nec
Ravi
वेदांत युराज
Krishna
Wander full
Hi
Hii any welder yu need
good
Its so silent... almost like some sort of weird ritual.
becraul
Hii
Giỏi thất đấy
Masttttttttttttttttt
Ok
What type of welding in this car?
The majority is Spot welding. There is also some Mig welding and BMW uses a lot of adhesive in place of welding. All three methods are seen in this video. I used to work on those lines in that plant.
it is real engineering
mate may i get your mail id i have some doubts , please mention your mail id
Spot welding
Cammpany kam milega Ham ko
there's room for a lot of optimization
Walter's Guides how? Which process specifically? How would you "optimize" it? What would It cost to integrate said opt? Please, dont leave us wanting , say what is and can be done....
monu
Wow
VISHNU KUMAR 6
también el video lo ha grabado un robot?
It is my hope to work B M W
what's amazing
Suraj Diwakar 7908319132
@@motihoque1335 a
Rutik
yee
फ
А в это время на АвтоВАЗе русская пьянь шурупы молотками забивает.
By
Give me a car company job
4:20
these robots are way smarter and faster than humans
I thought they were a bit slow, but they don't go strike..often.
But humans build those robots therefore that means that the humans are smarter
Smarter no, they are programed dummies but much faster especially with todays slow and lazy workforce.
Painter
it is work b m w
nice
Nice
Hii
Wow
Nice
Nice