Hi Hottubesupplies, I have a water leakage on the opposite side from the endcap. Who could provide me with an solution? There was a frost damage on the endcap and I‘m afraid that the opposite side has also suffered. Thank you!
My heater is reading 19.6 ohms.. GFCI trips immediately as soon as I flip the breaker. Hot tub is not heating. I have hit the reset button on the no fault 6000 heater. Any ideas? is 19.6 ohms too high? I've seen websites say 8-20 ohms is good, and others say 8 - 15 ohms is good. Thoughts please?
***** Replacing the heater fixed this problem. Cheapest deal I could find is at hot tub works www.hottubworks.com/part-73790-item-hottub-heater-assembly.php
...I am getting a 0 reading with the ohms test. I have no filter or air lock issues. The reset button on top the heater does depress but never has seemed to engage or "click"...is it possible I get a 0 reading because the reset button is bad?
WARNING Must be watched muted because of inappropriate mind numbing vomit inducing background musak. Shows very poor mechanical and electrical techniques.
Hi Hottubesupplies, I have a water leakage on the opposite side from the endcap. Who could provide me with an solution? There was a frost damage on the endcap and I‘m afraid that the opposite side has also suffered. Thank you!
I dont think they should have the name “no-fault”, because when they fail they technically are at fault.
I got mixed up reattaching the sensors. . .does it matter which one is which? I loved the music BTW
each sensors are two different sizes, but its been a year, I'm sure you figured this out by now.
I would have definitely taken 30 seconds to clamp those hoses lol
Hey you haters. Absolutely nothing wrong with that music
My heater is reading 19.6 ohms.. GFCI trips immediately as soon as I flip the breaker. Hot tub is not heating. I have hit the reset button on the no fault 6000 heater. Any ideas? is 19.6 ohms too high? I've seen websites say 8-20 ohms is good, and others say 8 - 15 ohms is good. Thoughts please?
***** Replacing the heater fixed this problem. Cheapest deal I could find is at hot tub works
www.hottubworks.com/part-73790-item-hottub-heater-assembly.php
...I am getting a 0 reading with the ohms test. I have no filter or air lock issues. The reset button on top the heater does depress but never has seemed to engage or "click"...is it possible I get a 0 reading because the reset button is bad?
music drove me crazy!!
Same here!
@@mvm932 All you have to do is lower the volume. No big deal!
All people have to do is not put crappy music on their videos, too.
i would fire this service tech or company ratty work. omg invest in the right tools....
It's a tutorial to do it yourself. So do it yourself
......don't re-use those shitty "squeeze clamps". Get a few stainless steel 3/4" clamps and do it correctly.
WARNING Must be watched muted because of inappropriate mind numbing vomit inducing background musak. Shows very poor mechanical and electrical techniques.
May I ask, WTF is up with that music? You lost all credibility. Couldn't watch. Sorry.
wow somebody has some issues xD
Cut the music!!!