Just wanted to drop by a quick thank you for the tutorial! Great job there and the information on the faceplacte, since I think this is a awesome conideration before stepping into the DIY realm of customizing. I love how that it's the faceplate and other controller components are customizable. I may find myself with one soon, mhmmm... take care!
How did you get the screws off they put a little pin in the middle of mine so I couldn't use a hexagon screw driver could you help me or tell me if you had a problem similar
I didn’t have a spudger so I just used a flat-head screwdriver and it came out nicely. If anybody else doesn’t have a spudger I’d recommend using the flat-head too.
Excellent video, thank you. I bought an expensive controller from an online company who specialise in bespoke shells. But like all my controllers they dont last more than a couple years because Im fat fisted and squeeze them too hard and damage the joy stick mechanism. So when I saw this video i practiced on my old broken controllers and then swapped my bespoke shell onto my current working controller. The screws were tricky to remove but once i found the right technique it was easy. Very pleased to have my bespoke shell in use again. And now when I brake this controller I know I can swap over the shell again!!
Thanks, this really helped. Especially since my parents are asleep and I was bored 😅 I did wat,h the video through before completely doing the process of changing the plate so I would know what I was getting into. And it wasn't really that hard
I know this is an older video but I just did this to one of my controllers! If he didn't mention in the video, I believe you need a T8 torx (?) screwdriver (star shaped) I now have a Resident evil faceplate
Oh gosh, I got nervous when I couldn't find the screws on the Xbox controller, but this way easier than the Switch JoyCons and I've done those before successfully. Thank you!
I guess an option would be to go crafty. Disassemble the controller, use sandpaper (maybe a fine grit) on the white parts, spray with plastic primer, find some beige spray paint meant for plastics, and a clear coat. I build plastic models kits. So I have those things on hand, so it's not a big deal for me. Although, gathering such materials for what come be a one-time use, it might come to anywhere between £/$20-25. At that point, I bet if you did a little digging, you could probably find some custom parts in that colour for cheaper. I mean I have a 3D printer, and was originally going to buy some PLA impregnated with wood particles, and 3D print a faceplate. So it would not only look like wood, sand like wood, stain like wood, and feel like it too. But since it would be a one-time use, and I can't think of any other things I would need to print in Wood PLA, it works out cheaper to just buy this faceplate.
You can buy grips and back pannels from ExtremeRate that matches the faceplate, and in some cases you can buy the faceplate with the grips and back pannels
This was a good help. I found though that heating the plastic with a hair dryer makes removing the palm/side peices, far easier. That might help others.
Awesome video. I bought a purple -pinķ hard cover for the controller. It fits perfect after watching your video. We would of never known about the location of the screws to pop off the top and side sections of the controller. My Granddaughter loves her new controller. Thank you so much.
When putting the screw in turn CCW till you feel a click (the screw will drop slightly in the hole when his happens) and then turn clockwise. This ensures the screw threads line up and you don't end up crossthreadding the screw. Also only turn till the screw stops and then tighten a little bit using two fingers on the screwdriver and no more than that.
Thank you man for showing me how to do this, because i had an old broken controller but it has a really good faceplate, so, i put it on a functional one
Thanks for the video. I bought cordless screwdriver for the first time (Tacklife cordless, USB chargeable) and have just gone a bit crazy with testing it out--it comes with a Torx drivers. Now it's got me of customizing my wireless Xbox One controller for Windows (I'm a PC gamer, use nVidia Gamestream to play PC games on my Fire TV and smartphone), which is basically just an Xbox One S controller. I was going to buy some wood impregnated PLA and print out one since I have 3D Printer, and people have either scanned the original faceplate/shell, or 3D modelled it from scratch. But it works out cheaper to just buy this. Sidenote: If you don't have a pry tool, you could use something like a guitar pick (I play guitar) or something that's credit card-like.
nice. my mother messed up my controller so thank you for this video. i will be sure to show this to her before she tries to do anything else so we won't have to buy multiple controllers.
I got one with The Wave on it! Put it on today, but should have checked the controller today because now it wont stay powered on. Dont think i did anything to damage it, but cannot stress how careful to be when doing this :)
Thank you so much for your video, I followed along while changing my own faceplate. Thank you so much for putting this information out there for everyone. I don't think I would have figured it out otherwise😅😆
Guys before you do this make sure the plate you have is for the right type of controller, so Xbox one original, xbox one s/x. Because I just put an Xbox one plate on my Xbox one s controller.
How do these things hold up. I’ve noticed that the faceplates are just painted. Does the paint start to fade or wear off with normal use. I’m especially worried about the area around the thumb sticks
I have the exact same one of the video. First off I had some starting trouble because the holes for the x, y and b buttons were slightly too small which made them feel mushy when pressing, so I had to give it a slight sandpaper rub for that to work as it should. Ever since (for like a year now) I have had absolutely no trouble since. It doesn't wear off, it doesn't get dirty as much as the original and its just good. I don't use it that much to be fair though, I use it on PC so mostly I use keyboard and mouse.
THANK YOU for showing me an easier way to take off the pieces on the sides. I struggled with them for 10 minutes and they wouldn't budge.
Just wanted to drop by a quick thank you for the tutorial! Great job there and the information on the faceplacte, since I think this is a awesome conideration before stepping into the DIY realm of customizing. I love how that it's the faceplate and other controller components are customizable. I may find myself with one soon, mhmmm... take care!
5
@@evanmeza2243 what
I just found this video because I recently purchased the chrome pink one! Super easy to put on actually, this helped out a lot 💕
How did you get the screws off they put a little pin in the middle of mine so I couldn't use a hexagon screw driver could you help me or tell me if you had a problem similar
Does anyone know of you can put a plate in a scuf controller?
Me still trying to take off the one of the corner pieces and struggling but I live alone so I can't get help
lmao
Lol
You sound like a caveman
and you still struggling with it
Haha it took me 1 minute to open It cause I threw it
did it work lol
Why im here
Beautiful idea, I think I should do that. LMAO
whoa how did you unscrew it when it hit the wall, i wanna know
@@aidenlawrence6676 gamer magic
Not bad price for something that isn't just skin.
Agreed. Far better than a skin, and only a few £ more.
skins are ridiculously priced, there's a LOT of nice face plates out there.
And the skin doesn't even cover the whole faceplate
Skin is good dehydrated 😌 👍🙂👌😆😀
My mother has a sticker printer i cant just ask her to make me one for less than a dollar XD
I love the wood grain on that controller, I definitely plan on doing the same thing
Thank you so much for the tutorial, I was thinking about reshelling one of my controllers
ive spent abt 10 minutes on trying to take off the grip, and im still going
Same lol 💀
Me too lol
8 months later - have you got it off yet?
3 years later... you got it off now?
@@Kermit4415 I gave up deadasss💀
thanks man. this video was a big success and really helped me out alot. keep up the great work and have a nice day
I didn’t have a spudger so I just used a flat-head screwdriver and it came out nicely. If anybody else doesn’t have a spudger I’d recommend using the flat-head too.
Yay!
Very clear and concise instructions, changed my faceplate in less than 5 mins !
What kind of screw for the first step
T8 screw
No it is a T9h screw driver
I tried three different types of t8 and they were all too big
Logan Kauffman same
I can’t find any of them
Excellent video, thank you. I bought an expensive controller from an online company who specialise in bespoke shells. But like all my controllers they dont last more than a couple years because Im fat fisted and squeeze them too hard and damage the joy stick mechanism. So when I saw this video i practiced on my old broken controllers and then swapped my bespoke shell onto my current working controller. The screws were tricky to remove but once i found the right technique it was easy. Very pleased to have my bespoke shell in use again. And now when I brake this controller I know I can swap over the shell again!!
why the hell do the controllers required the weirdest ass screwdriver ever made, I literally have every screw besides this one
He too, I have a interchangeable t8 bit and I don’t have any t8 security bits.
cause they don't want you seeing how fucking trashly they're made
Its a torque bit
@@chrismusiclover9893not only that they’d rather you buy a new controller rather then you to be able to attempt to fix it yourself if it fucks up
it took me wayyyy longer than expected, but you helped.thanks!!
Thx a lot just bought some grips and cover. Super helpful video.
Thanks, this really helped. Especially since my parents are asleep and I was bored 😅 I did wat,h the video through before completely doing the process of changing the plate so I would know what I was getting into. And it wasn't really that hard
Looks absolutely amazing👌
I know this is an older video but I just did this to one of my controllers! If he didn't mention in the video, I believe you need a T8 torx (?) screwdriver (star shaped)
I now have a Resident evil faceplate
I'm using that size , it don't fit
Oh gosh, I got nervous when I couldn't find the screws on the Xbox controller, but this way easier than the Switch JoyCons and I've done those before successfully.
Thank you!
If the white parts were beige than this would be perfect
SoldierOfJudgement04 it’s just the front plate
^^^ 𝒩ℴ 𝓈𝒽𝒾𝓉
I guess an option would be to go crafty. Disassemble the controller, use sandpaper (maybe a fine grit) on the white parts, spray with plastic primer, find some beige spray paint meant for plastics, and a clear coat.
I build plastic models kits. So I have those things on hand, so it's not a big deal for me. Although, gathering such materials for what come be a one-time use, it might come to anywhere between £/$20-25. At that point, I bet if you did a little digging, you could probably find some custom parts in that colour for cheaper.
I mean I have a 3D printer, and was originally going to buy some PLA impregnated with wood particles, and 3D print a faceplate. So it would not only look like wood, sand like wood, stain like wood, and feel like it too. But since it would be a one-time use, and I can't think of any other things I would need to print in Wood PLA, it works out cheaper to just buy this faceplate.
You can buy grips and back pannels from ExtremeRate that matches the faceplate, and in some cases you can buy the faceplate with the grips and back pannels
2:45 that's what she said 😏
SyNoir lol I was thinking the same thing
Bow chicka bow wow
big funny
Just used this video to install an Extreme Rate Rose Red faceplate. Fantastic tutorial, thank you!
That's all it takes, should've realized it would've been something simple. Great tutorial :)
Thanks for the vid, the grips definitely were the hardest part.
Thanks for the video! Really straight forward and easy to follow. The faceplate I just bought actually came with the little pry tool so that was nice.
This was a good help. I found though that heating the plastic with a hair dryer makes removing the palm/side peices, far easier. That might help others.
Awesome video. I bought a purple -pinķ hard cover for the controller. It fits perfect after watching your video. We would of never known about the location of the screws to pop off the top and side sections of the controller. My Granddaughter loves her new controller. Thank you so much.
Thank you, my joystick popped out of my faceplate so I will certainly use this to just pop it back in
When putting the screw in turn CCW till you feel a click (the screw will drop slightly in the hole when his happens) and then turn clockwise. This ensures the screw threads line up and you don't end up crossthreadding the screw. Also only turn till the screw stops and then tighten a little bit using two fingers on the screwdriver and no more than that.
Thank you sm
Thanks dude. I’m painting my front shell to look like 501st clone armor from Star Wars!
Helpful, but, what size was the screwdriver head? I’ve been going around my house like a madman trying to find the right size, but no luck.
That first screw did not wanna come out but this video helped alot
decent Face plate I got mine for my series x controller and it's honestly not that bad They feel amazing too like the real thing
i used this info to spraypaint my controller it looks nice. I like your clean wood design
Thank you man for showing me how to do this, because i had an old broken controller but it has a really good faceplate, so, i put it on a functional one
What’s the official part name of the 2 back parts you took off please as mine have cracked?!
Grip back panels
Simple concise instructions tho I needed hubby to help me prie open the side panels haha
Thanks! I just bought a new shell for my controller and I didn’t know how to do it.
That looks amazing!!! 👍
I did this to clean the buttons instead of just putting rubbing alcohol but actually cleaning thoroughly
Thanks for the video. I bought cordless screwdriver for the first time (Tacklife cordless, USB chargeable) and have just gone a bit crazy with testing it out--it comes with a Torx drivers. Now it's got me of customizing my wireless Xbox One controller for Windows (I'm a PC gamer, use nVidia Gamestream to play PC games on my Fire TV and smartphone), which is basically just an Xbox One S controller.
I was going to buy some wood impregnated PLA and print out one since I have 3D Printer, and people have either scanned the original faceplate/shell, or 3D modelled it from scratch. But it works out cheaper to just buy this.
Sidenote:
If you don't have a pry tool, you could use something like a guitar pick (I play guitar) or something that's credit card-like.
not to be rude but no one carea
Thanks so much this will help! 10/10
So easy to follow, great video! And now my new face plate is on and I'm ready to play! 😊
Thank you as well for showing that the sticker can be removed without piercing it too.
2:30 so hard I did it but when getting off chipped abit but I'm the end it was worth it looks so cool
I wanna know if anybody ended up breaking there controllers
Me
i just tryed it...lets say...almost...
their'*
Kind of one of my back grips plastic cracked
I am going to take the top and then hydro dip it and I think it wil be cool
Same I doing it for fun and for a school project
Thanks dude! Very clear instructions :)
Thanks so much! This was extremely helpful and now my controller looks awesome!
I got the Sakura pink one and mistook it for a silicone shell but this was really informative!
Never done anything like this before but this really helped 👍🏽
Nice video I was able to do this in 19 minutes
Thank you for the nice Tutorial
Thanks man just replaced my broken arctic camo case and u really helped man. Thanks a lot and have a nice day 🤩
I remember when you used to be able to just pop them off smh why do they need to make things so difficult!
Guys if your planning on doing this use a spudger like he used it helps a lot
thanks so much for the tutorial, i was trying to get the faceplate off to clean my A button becuase it was sticking.
Thanks mate this really helped me out
nice. my mother messed up my controller so thank you for this video. i will be sure to show this to her before she tries to do anything else so we won't have to buy multiple controllers.
Where did u get that blue thing
Thanks for the guidance! I didnt break anything and got it all done rather smoothly 👌 I can now officially classify myself as an adult
Your a kid mate and its not that hard
@ExecutorHype22 your a nobody so make me ah wait you can’t
This vid helped a ton thx!!!!!! 👍
Thank you. Worked perfect.
No (beep) this tutorial was the best I love it. It also help me so. Whoo hoo. Thanks
Excellent video!
Perfect video 👌 Thank you very much
Can you please help how to configure radica gamester arcade stick on Xbox didn'txspectrum emulator and others moded Xbox thanks
I got one with The Wave on it! Put it on today, but should have checked the controller today because now it wont stay powered on. Dont think i did anything to damage it, but cannot stress how careful to be when doing this :)
Cheers bro really helped I got a lightning bolt one and it looks fire
I'm not into the wooden look but it does look pretty nice with the white
I'm gonna get their joker skin! thanks for the guide!
They also fit on the new Xbox one controllers with the headphones jacks
What kind of stew is that ?
Excellent commentary 👌
Thank you sir, for your help much appreciated man
did you need a special screwdriver to do this or does any start tip work
Did u cop this at wish cause they are sick
ITS THE LAST TIME I EVER DO THAT! That was so hard to do............ BTW thanks for video lol xD
Thank you so much for your video, I followed along while changing my own faceplate. Thank you so much for putting this information out there for everyone. I don't think I would have figured it out otherwise😅😆
So great
🤩🤩
Thank you brother works perfectly ☝️
Thanks😂 dog chewed off the rubber piece on top of my left joystick so I had to replace it.
Guys before you do this make sure the plate you have is for the right type of controller, so Xbox one original, xbox one s/x. Because I just put an Xbox one plate on my Xbox one s controller.
Do you deed that specific pack for the screw
Thanks for the video it helped me out alot
Thank you so much 😊
How do these things hold up. I’ve noticed that the faceplates are just painted. Does the paint start to fade or wear off with normal use. I’m especially worried about the area around the thumb sticks
I have the exact same one of the video. First off I had some starting trouble because the holes for the x, y and b buttons were slightly too small which made them feel mushy when pressing, so I had to give it a slight sandpaper rub for that to work as it should. Ever since (for like a year now) I have had absolutely no trouble since. It doesn't wear off, it doesn't get dirty as much as the original and its just good. I don't use it that much to be fair though, I use it on PC so mostly I use keyboard and mouse.
A simple wipe of your ocntroller will make it look like new
Thanks, this helped a lot
THANK YOU SO MUCHHH
The tip cover won’t come off how do I take it off
Might have to do this my front has lots of deep scratches
what can i use if i dont have one of those special screwdrivers
Denice Tullos ur “screwed” 😭💀
Use a flathead
a...new controller?
break the security pin and use a regular star bit
What type of screwdriver for the battery back part
Very helpful thx a lot
Face plate had an extra plastic lip that didn’t give it a perfect fit. It’s lifting over the pause and power buttons.
Wait does that center screw use a different head it looks like a hex not torx like the rest
this was helpful
What's the screwdriver you use