Thanks Lemark! Using stock 34T spool with 34T pinion. I think I hit full throttle, but couldn't hold full for longer than a second, as the road was very narrow and I didn't want to risk a crash or hitting somebody.
Awesome video and bad ass arrma wanted to ask what is the name of the gps u have on it bad ass how u recordings and u can see yr speed rang at the bottom right 👍🏼
Thanks lots Alex! So sorry for the late reply. I'm using my Garmin Edge cyclometer. The gps data was then imported in together with the video using the Garmin VIRB free software.
I have max 6 in mine 2200kv leopard motor. 37 pinion 6s battery. Mine hit. 197. That was on my 2200kv hobbywing motor. Max 8 set up. I dont no what my new system does. This car is fast so becareful. An have losts of room when running
Whats ur esc set up like. I have the same set up. Is ur timing degree changed?? R u running it on cw or ccw. R the motor wires crossed. So itll run in forward ...???
Hi there! I ran it stock, didn't change the ESC settings other than having higher voltage cutoff. You will be able to change the motor direction in the ESC programming instead of swopping the wires.
D. Khoung hmmm that’s what I thought too, but maybe the 1250kV doesn’t give high enough rpm to achieve that with the 1:1 ratio. I’ll probably look into some bigger pinions from Saga Custom.
@@TDR-RC yah, good point. Other factors include your tires and the differential gearing. Total burst output of Esc in correlation to the motor output. Heres a video on gearing their break some of that down. Nice video and good luck with your speed runs. th-cam.com/video/IevcWhk_7es/w-d-xo.html
Being faster is totally dependant of every aspect of the set up, not just the motor or gearing. Fact of the matter is he still has the stock front splitters on which is holding the car back a good 4-6km/h. With that being said, the rear wing is more than likely uncut as well. Making these cars perform exceedingly well requires attention to detail
@@hnic72 nothing will change the speed of a RC car more than motor KV and gearing. Aerodynamics is more important for downforce and traction. Your qualification of 4-6km/h translates to max 3.7mph. On the 100mph scale, that's insignificant.
That actually slow he is recording speed in km and avs setup properly is a wonderful thing
Smooth ride for scale car going scale version of probably 300mph
Absolutely wonderful how straight it runs😱 and Fast too😱
Thanks man! The Limitless is a really great car. I think Arrma did a very stellar job with these cars. Really feeds our need for speed, huh! LOL
Your Limitless sounds so dam smooth. Great run💯
Awesome speed run . Great on board footage too . Just joined the rc family #98 😎👊
Awesome video. You think the same 160a/1250kv combo will kit the Kraton 6s
Where did u do this speed run? Is it somewhere in Lor Halus? Thnx
Would it still be fast on 3s with 85amp
Nice save have to say looks fun
Slidin SideWayz Production SSP thanks! Sorry for the late reply.
What software did you use to get the data on screen?
What's the spur gear that thing bad ass did you reach full throttle in this video
Thanks Lemark! Using stock 34T spool with 34T pinion. I think I hit full throttle, but couldn't hold full for longer than a second, as the road was very narrow and I didn't want to risk a crash or hitting somebody.
I want a link shop please
Awesome video and bad ass arrma wanted to ask what is the name of the gps u have on it bad ass how u recordings and u can see yr speed rang at the bottom right 👍🏼
Thanks lots Alex! So sorry for the late reply. I'm using my Garmin Edge cyclometer. The gps data was then imported in together with the video using the Garmin VIRB free software.
I have max 6 in mine 2200kv leopard motor. 37 pinion 6s battery. Mine hit. 197. That was on my 2200kv hobbywing motor. Max 8 set up. I dont no what my new system does. This car is fast so becareful. An have losts of room when running
Try the Arrma heatsink with the fan..
I have the same setup..
Ok, will try it, thanks Eugene!
Hello
Have you cut the hole support to fix the firma 160 ?
@@felixaguilar1106 cut what hole
@@felixaguilar1106 whats that mean
@@tropicthunderbolt the 4 support to fix the screw at the firma 160
Whats ur esc set up like. I have the same set up. Is ur timing degree changed?? R u running it on cw or ccw. R the motor wires crossed. So itll run in forward ...???
Hi there! I ran it stock, didn't change the ESC settings other than having higher voltage cutoff. You will be able to change the motor direction in the ESC programming instead of swopping the wires.
Like somewhere around 40-45 like most cars on 3s
Strange, with that setup should be doing faster than a hundred miles per hour. Especially with the 1 to 1 gear ratio
D. Khoung hmmm that’s what I thought too, but maybe the 1250kV doesn’t give high enough rpm to achieve that with the 1:1 ratio. I’ll probably look into some bigger pinions from Saga Custom.
@@TDR-RC yah, good point. Other factors include your tires and the differential gearing. Total burst output of Esc in correlation to the motor output. Heres a video on gearing their break some of that down. Nice video and good luck with your speed runs.
th-cam.com/video/IevcWhk_7es/w-d-xo.html
Being faster is totally dependant of every aspect of the set up, not just the motor or gearing. Fact of the matter is he still has the stock front splitters on which is holding the car back a good 4-6km/h. With that being said, the rear wing is more than likely uncut as well. Making these cars perform exceedingly well requires attention to detail
@@hnic72 nothing will change the speed of a RC car more than motor KV and gearing. Aerodynamics is more important for downforce and traction. Your qualification of 4-6km/h translates to max 3.7mph. On the 100mph scale, that's insignificant.
@@hnic72 Haha yup, I left the wings uncut so far.
Very nice
What gps do you use??
Hi Mark! I used my Garmin Edge cyclometer
Really impressed with this video what camera are you using 🏆
Thanks! I’m using my old GoPro Hero Session, the one that looks like a cube.
Hey, what pinion and spur gear do you have on this one? Have the same motor and running with 18t pinion and 54tspur. Lol
39-39
Very nice run brother 👍 subbed
Thanks lots GAZ!
Just subscribe great run my friend 🔥🔥🔥🔥
Insane!
Tem torque? 😂
I ran mine in 45t and got 153 mph
Nice.
Thanks Antwon!
Very Nice pass so agressif in this motor im news in your Channel 🔥🏆😎😎😂🏎
Thanks man!
D
Lol 156.km
You drive like old women
i can beat my father car
Seeing that fast I bet my mini ervo can go faster than that
You must be running a 34t pinion, because the stock gearing wont get you past 100mph.
ratio of 1:1 will .
thanks for the video brah
Read the description. They did use a 34t pinion and 34t spool.