In the Cameo 4 tool adapter, the CB09 hangs a bit over 1/16" lower. The blade has to be set very short. Defeats the purpose of having a longer blade. Maybe Silhouette will release a tool adapter for the 2nd carriage of the Cameo 4.
The second carrier is for thick and harder materials, it has a different type of motor. I doubt they will let us use anything that’s not made for it because it could damage the machine if used incorrectly.
@@kraftwithkay7331 I've seen a guy that made his own adapter, and placed a regular magnet to fake an autoblade. It worked on both carriages without hassles.
@@DesordenadoPeroUtil the issue here is that if it is not recommended by the brand there are no guarantees that it won’t damage the machine in the long run.
@@kraftwithkay7331 the brand will never recognize that since they are not profiting from blades. It's safe enough. I've used generic cb09 on professional grapthec plotters (original cb09 are not the same) for years, and never ever got an issue for using them. Of course, if you're a safe player, yes, you never have to use any accessories nor materials that those provided by the brand.
@@DesordenadoPeroUtil Since I help people with their Cameo issues, I simply cannot recommend this and risk them getting upset for any damage done. I understand it works for you and that’s absolutely fine. 😁
Hi, can you tell me exactly which you bought that fits? I have purchased 2 now from Amazon and neither fits the adapther like the one you had that did n't fit both of the ones I got don't. the holder won't close all the way and it won't fit into the machine even if I get it almost closed. So it looks like they are differnt circumfrences out there. Hate to have to but several to find the one that does fit.
Hi, thanks for this video, but I have a question for you or for who has an answer for me. How did you put marker marker in blade (numbers) to go on the same level as those in Cameo? I found a file but I think it's wrong! Thank you
Hello. Thanks for your teaching. I am writing to you from colombia, and I want to ask for your help. Do You know where I can Buy these blades for my 4 cameo? Excuse me for My daring
I don’t have trouble with it scratching the paper. Not to say I never had. I do have some little o rings I made from card stock to lift the blade just a bit if needed.
I have a CB09 blade & I use it with my cameo 4 but I have scratch marks all over my vinyl after it’s done cutting & I don’t know why it’s doing that. If anyone knows why it’s doing that lol I could use some help!
sha-von buan I had the same problem! It’s because the cb09 in the Tool 1 spot hangs lower than it did in the Cameo 3. I haven’t had time to find a workaround yet. Annoying!
For some reason I am just now seeing this post. I have some rings I cut from card stock that lifts the blade just a bit if it is leaving scratches on my vinyl.
@@soylattegrl I will try to make some since you are having this trouble with the ratchet blade. If I do, I will make a video on how to make them. It is simple. Just make two circles the size you need and cut out multiple with card stock. But, I haven’t used them with the ratchet blade.
marsha ryan I don’t have any other blades. I want to get them and try them out. I actually use my Cameo 3 most of the time. I just can’t get the Cameo 4 to cut as well as the 3.
@@divalea Sorry I just saw this post! I still use my 3 for most projects. Maybe because I am more familiar with it. Both cutters cut just a bit different and I am use to the 3.
It has been so long ago that I made the video, I really can’t remember. Since I just moved the design over to cut, I’m pretty sure I used the auto settings for vinyl.
In the Cameo 4 tool adapter, the CB09 hangs a bit over 1/16" lower. The blade has to be set very short. Defeats the purpose of having a longer blade.
Maybe Silhouette will release a tool adapter for the 2nd carriage of the Cameo 4.
The second carrier is for thick and harder materials, it has a different type of motor. I doubt they will let us use anything that’s not made for it because it could damage the machine if used incorrectly.
@@kraftwithkay7331 I've seen a guy that made his own adapter, and placed a regular magnet to fake an autoblade. It worked on both carriages without hassles.
@@DesordenadoPeroUtil the issue here is that if it is not recommended by the brand there are no guarantees that it won’t damage the machine in the long run.
@@kraftwithkay7331 the brand will never recognize that since they are not profiting from blades. It's safe enough. I've used generic cb09 on professional grapthec plotters (original cb09 are not the same) for years, and never ever got an issue for using them.
Of course, if you're a safe player, yes, you never have to use any accessories nor materials that those provided by the brand.
@@DesordenadoPeroUtil Since I help people with their Cameo issues, I simply cannot recommend this and risk them getting upset for any damage done. I understand it works for you and that’s absolutely fine. 😁
Vary neat ! Welcome to the Facebook group your new friends ~ Tony & Shelly
Hi, I use the blue holder, as you show, but it doesn't close well, why? How do you make them close so perfectly?
I do have another blade that does not fit well. This one fits good. It’s not as thick as my other one.
Good vid
Wow
Amazing cheiken
You have talent to
Make this
Thanks for sharing
Thanks for stopping by my channel... New fan... New friend... Nice channel
Thanks for stopping by!
Hi, can you tell me exactly which you bought that fits? I have purchased 2 now from Amazon and neither fits the adapther like the one you had that did n't fit both of the ones I got don't. the holder won't close all the way and it won't fit into the machine even if I get it almost closed.
So it looks like they are differnt circumfrences out there. Hate to have to but several to find the one that does fit.
I bought it from eBay from joycelijane. It came from Hong Kong. That was a long time ago though.
mine fits in the black holder, not the blue, it works for me
Hi, thanks for this video, but I have a question for you or for who has an answer for me. How did you put marker marker in blade (numbers) to go on the same level as those in Cameo? I found a file but I think it's wrong! Thank you
So helpful!
Hello. Thanks for your teaching. I am writing to you from colombia, and I want to ask for your help. Do You know where I can Buy these blades for my 4 cameo? Excuse me for My daring
I ordered mine from Amazon.
Thanks
Hola amigo soy de colombia, como te fue con la cuchilla ?
Hola de donde puedo sacar el archivo de las medidas
Does an autoblade for into the second slot? I kiss cut stickers and also die cut around my sheets
The auto blade only fits in slot one.
Helllo, this is a highly specialised field. I can't say I know what it's about. I don't know what question to ask, ....Imet you in the fb group.
Where did you get the sticker that shows the depth of the blade?
I had a link somewhere in the comments. Not sure it is still available. I really don’t use it. I find it easier to adjust it myself.
I found the page that has the link. Here it is.
paperpulse.blogspot.com/2014/05/calling-all-cb09-blade-holder-and-blade.html?m=1
I thought this cbo9 blades should go in the grey holder?!
It all depends on technique of using blade .....
hi dear ni videos .like
hi good afternoon how do you do so he doesn't scratch the paper
I don’t have trouble with it scratching the paper. Not to say I never had. I do have some little o rings I made from card stock to lift the blade just a bit if needed.
I have a CB09 blade & I use it with my cameo 4 but I have scratch marks all over my vinyl after it’s done cutting & I don’t know why it’s doing that. If anyone knows why it’s doing that lol I could use some help!
sha-von buan I had the same problem! It’s because the cb09 in the Tool 1 spot hangs lower than it did in the Cameo 3. I haven’t had time to find a workaround yet. Annoying!
For some reason I am just now seeing this post. I have some rings I cut from card stock that lifts the blade just a bit if it is leaving scratches on my vinyl.
@@bitsofme I would love to see how you added the rings. My ratchet blade and other blades are doing this as well. Great Vid. Thank you!
@@soylattegrl I will try to make some since you are having this trouble with the ratchet blade. If I do, I will make a video on how to make them. It is simple. Just make two circles the size you need and cut out multiple with card stock. But, I haven’t used them with the ratchet blade.
@@soylattegrl I have put up a video on how to make the rings. It is so easy.
th-cam.com/video/FT7pICXkmMY/w-d-xo.html
did you try the one that is too big for the adapter, in the holder without the adapter to see if it fit on its own?
No I didn’t. Good idea!
@@bitsofme let me know if it fit. I'm just curious!
@@julieprince77 I sure will. On vacation right now but I will try it when I get home and let you know.
@@julieprince77 Julie, I tried it and it did not work.
How did you get the lines and numbers on the blade holder?
It was a free download I found on a site a couple of years ago.
That's the print template here: box.com/shared_item/https%3A%2F%2Fapp.box.com%2Fs%2F66gh3gaan9eqopjihj5c
There is a cb09 FB group. They have the file accessible in the group also. Do a search for the group on FB
Have you had any luck with the Silhouette 4 rotary blade or the 3mm Kraft blade? I am having a hard time getting the tool 2 blades to work.
marsha ryan I don’t have any other blades. I want to get them and try them out. I actually use my Cameo 3 most of the time. I just can’t get the Cameo 4 to cut as well as the 3.
marsha ryan Hi! What sort of trouble are you having?
@@bitsofme I thought the cutting force in Cameo 4 was better than Cameo 3?
@@divalea Sorry I just saw this post! I still use my 3 for most projects. Maybe because I am more familiar with it. Both cutters cut just a bit different and I am use to the 3.
@@deepdiver849 It is but I was just testing to see if I could use the CB09 blade in the Cameo 4.
what setting and blade do you use in the software
Dupes Custom Designs I set the blade to 3.
Hello please which of the degrees of the cb09 blade you used?
I used the 45.
hi what is the force and speed value you used for cb09?
It has been so long ago that I made the video, I really can’t remember. Since I just moved the design over to cut, I’m pretty sure I used the auto settings for vinyl.
@@bitsofme oh... I am having a hard time to make the cutting precised with smaller details. thank you for your response tho.
What blade did you use for the CB09?
I used the 45 degree blade.
Hi! is the CB09 compatible to Cameo 4 Plus 15"?
I really don’t know. I would think it would be able to be put in carriage 2. I only have the Cameo 3 and 4.