ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Your air compressor needs this Part 2! Testing the DIY compressor aftercooler!
ฝัง
- เผยแพร่เมื่อ 18 ส.ค. 2024
- In this video I test out how effective my DIY air compressor aftercooler, built with race car parts, is at removing moisture from the air!
SST MEGAFLOW 3-Stage Filter/Regulator:
stupidsimple.t...
MAXLINE Master Kit by Rapid Air:
www.rapidairpr...
Hello Rich, thanks for both of the videos on air compressor improvement. I just completed the post compressor drier installation and coupled with the three stage filtering and drying previously installed I'm ready to do more plasma cutting with better results. Now I'm working on quieting the compressor intake.
Heck yeah! Glad that the videos were helpful and good luck on your plasma cutting!
Excellent information! Thanks for sharing
Thanks and you are welcome!
If you want bone dry air you must run your air tru a A/C dryer (not the silica bottle) Your intercooler Air Cooler inside a A/C BOX
liked and subbed....great job brother!!! i have been hunting for quality filter for ages...
Thank you and I appreciate the sub!
Good test. Important in painting applications. I'm hoping for some videos on the square-body Duramax build soon. How is it going?
I’ve been sanding on that cab for nearly 10 hours, you guys don’t want to see all that!! That thing must have had like four paint jobs! The next video will be bondo, primer and blocking it out.. maybe the bed too. So much bodywork to do!
😂love Amanda’s giggles 🤭 Rich great science lesson here your amazing!
Very cool. So how much comes out of the bottom of the tank when you drain that?
Not much at all actually. The upstream filter just after the heat exchanger pulls out the majority of the moisture.
Cool setup.. im in cen tex also.. want to get the Megaflow when they come back in stock. I was also throwing around ideas of a similar setup for my Quincy.. i guess the 12v fan doesnt draw enough to starve the compressor motor of power? I wonder what humidty levels comes out of the expensive electric dryers they sell?
Yeah man the megaflow is awesome, highly recommended. As long as your wiring from your breaker box is sufficiently sized for your compressor you’ll be fine. I’ll measure the amps the fan is drawing and let you know!
Where are you located? I am in northeast NC and the temps have been 30-50F with low humidity (winter time). I've run my compressor just a bit and haven't gotten a lick of water out of the tank drain. Come July though, there will be buckets of water coming out. I would like to see this test done again in July or August, assuming you are in a humid area like the south east.
Rats are worse. I have black widows in the crawl space and get bit damn near every time I go down there. Just causes a swollen spot that pusses up for a few days. Rats chew everything and poop on what they don't chew on.
I’m actually in central Texas and we are coming up on the rainy season so I will have a great opportunity to test in higher humidity levels!
Spiders are scary as f#€k. Nice work with the compressor sir.
I agree!! Thank you!
Hate to be the one that puts the wrench into the gearbox but you didn't drain the tank. Looks like the setup you have the tank is the lowest part and water will collect there.
No worries Kevin! I actually do have a solenoid operated tank drain valve I just forgot to mention it in the video! Also I’ve found that the upstream moisture separator catches the majority of water and the tank drain is normally pretty dry. Thanks for watching!
@@richphippsgarage cool, I was impressed with the reduced moisture levels.
Great chenel you hawe man
Thanks!
First!!!
So fast!! 😂
You could of bought a dryer that works for the money n time you waisted