Nice little rig! That’s a good price for a new boat/motor/trailer. Anyone that works on boats, or had a boat worked on for you, knows how time consuming and how expensive marine material are these days, and certainly understands what goes into boat building. Fist off, building a mold probably takes a 1,000 hours. Then you need to build the boats. I wish you luck and I hope they sell faster than you can make them. 👍
Thank you very for your feedback and well wishes 👍 🙏 Just for the record: I am not the manufacturer of this vessel. I am just a solo TH-cam content creator, I love boats and I only review vessels that I like. I already have a 14 footer that I keep at home and 99 percent of the time I use my center console 150 cc Triumph to go fishing. If I didn’t have mine, I would definitely buy this Exuma! I really like the large multi-function Simrad touch screen, the easy access to the bilge and the specious layout. Anyone with a little bit of expertise can maintain this vessel so no need to shell out a fortune to spend a spectacular fun day on the water. I upload a new video every Sunday and tomorrow, I will review a very different type of vessel that I fell in love with! 😊 If you haven’t already, please subscribe, like and share this content with your family and friends, I would really appreciate it 👍 Thanks again for your comments and see you on the next one! 🙏
Happy Saturday! I will uploading a new video on Sunday morning December 15. It will be about this legendary, highly praised boat that everyone loves! Please make sure you Subscribe and ring the bell so that you will be notified when the video is available. Catch you tomorrow!
Hello everyone, please stay tuned, I will uploading a new video on Sunday morning December 1st at 8:00 am Eastern Standard Time. It will be about A BRAND NEW MODEL that most of you if not all have not seen yet! I am confident you are going to LOVE IT!!! Please SUBSCRIBE and make sure you RING the BELL so that you will be notified as soon as the video goes online. Life is always better on the water -:) See you all very soon!
Thanks for your feedback. You're absolutely correct; the jack plate is important, it will prevent the lower unit from hitting the bottom. That said, this particular boat doesn't really need one. That would also increase the cost. Please check out my latest video where I review a 2025 Seadoo fishpro Apex which is ideal for shallow waters as it is powered by a jet drive. I will be uploading a new video before the end of this week and I'll introduce this time a brand new model that's just being launched! Please ring the bell so that you'll be notified when it's released. Thanks for your support.
Boats are not cheap... The practicality of this vessel is what makes it so appealing I think. It's very functional, super easy to maintain and a breeze to tow. It takes very little space so storage should not be an easy issue, either.
I hear you, but I took delivery of my last new boat in late 2019 and it was bigger (16), had more HP(60), was made of Kevlar, had a polling platform, 12 gallons of fuel, floated in 6 inches of water, and had a really nice trailer as well and after taxes and options, everything was less than this boat you've posted. Boats may have never really been cheap, but they've only recently entered absurdity in pricing.
@@primate2744I agree with you. However, the price of materials alone, I’m not surprised at the price. The days of the price that you paid, are gone. Keep it. I rebuilt a fiberglass bass boat. Did a cap off restoration. I found out real quick, why most do not pay for this to be done, or, even do it themselves.
Thanks for your feedback. Your opinion is important. This boat at full throttle, trimmed all the way, should do about 30 miles an hour on a calm day. Considering it's only 14 feet, it's adequate speed, I think. You can run this boat all day and spend less than 30 bucks on gas and that's the best part! -:)
Live well doubles as a toilet. 👍
Flush some chummers
Dip net
You know...for those trophies!
that is a nice little skiff and a hell of a deal!
Agreed! 👍
Nice little rig! That’s a good price for a new boat/motor/trailer. Anyone that works on boats, or had a boat worked on for you, knows how time consuming and how expensive marine material are these days, and certainly understands what goes into boat building. Fist off, building a mold probably takes a 1,000 hours. Then you need to build the boats.
I wish you luck and I hope they sell faster than you can make them. 👍
Thank you very for your feedback and well wishes 👍 🙏
Just for the record: I am not the manufacturer of this vessel. I am just a solo TH-cam content creator, I love boats and I only review vessels that I like. I already have a 14 footer that I keep at home and 99 percent of the time I use my center console 150 cc Triumph to go fishing. If I didn’t have mine, I would definitely buy this Exuma! I really like the large multi-function Simrad touch screen, the easy access to the bilge and the specious layout. Anyone with a little bit of expertise can maintain this vessel so no need to shell out a fortune to spend a spectacular fun day on the water.
I upload a new video every Sunday and tomorrow, I will review a very different type of vessel that I fell in love with! 😊
If you haven’t already, please subscribe, like and share this content with your family and friends, I would really appreciate it 👍
Thanks again for your comments and see you on the next one! 🙏
Looks well thought out, Avoid any rough water.
Yes. It’s mainly for the backcountry, the bay and skinny water.
Happy Saturday! I will uploading a new video on Sunday morning December 15. It will be about this legendary, highly praised boat that everyone loves! Please make sure you Subscribe and ring the bell so that you will be notified when the video is available. Catch you tomorrow!
Hello everyone, please stay tuned, I will uploading a new video on Sunday morning December 1st at 8:00 am Eastern Standard Time. It will be about A BRAND NEW MODEL that most of you if not all have not seen yet! I am confident you are going to LOVE IT!!! Please SUBSCRIBE and make sure you RING the BELL so that you will be notified as soon as the video goes online. Life is always better on the water -:) See you all very soon!
Why didn't you show the jake plate or mention it, quite necessary for fishing in shallow waters!
Thanks for your feedback. You're absolutely correct; the jack plate is important, it will prevent the lower unit from hitting the bottom. That said, this particular boat doesn't really need one. That would also increase the cost. Please check out my latest video where I review a 2025 Seadoo fishpro Apex which is ideal for shallow waters as it is powered by a jet drive.
I will be uploading a new video before the end of this week and I'll introduce this time a brand new model that's just being launched! Please ring the bell so that you'll be notified when it's released. Thanks for your support.
is the trailer included dont see one under the boat???
As far as I know, the trailer is not included. But for this vessel, you just need a small trailer, it shouldn’t be a deal breaker.
If it includes a trailer, then it's not TOO overpriced.
I am not sure whether it does but that is something that you can negotiate with the manufacturer.
Pretty cool. Live well looks like a shitter though.
LOL... It can serve dual purpose I guess..-:)
You took the words right out of my mouth 😂
Price , what
It's revealed in the video.
Looks pretty cool. Way too expensive for what it is though.
Boats are not cheap... The practicality of this vessel is what makes it so appealing I think. It's very functional, super easy to maintain and a breeze to tow. It takes very little space so storage should not be an easy issue, either.
I hear you, but I took delivery of my last new boat in late 2019 and it was bigger (16), had more HP(60), was made of Kevlar, had a polling platform, 12 gallons of fuel, floated in 6 inches of water, and had a really nice trailer as well and after taxes and options, everything was less than this boat you've posted. Boats may have never really been cheap, but they've only recently entered absurdity in pricing.
@@primate2744I agree with you. However, the price of materials alone, I’m not surprised at the price. The days of the price that you paid, are gone. Keep it.
I rebuilt a fiberglass bass boat. Did a cap off restoration. I found out real quick, why most do not pay for this to be done, or, even do it themselves.
To much wasted space for me.
I believe the manufacturer lets you configure the layout to a certain degree. It may be at an additional cost though.
underpowered and still overpriced.
Thanks for your feedback. Your opinion is important. This boat at full throttle, trimmed all the way, should do about 30 miles an hour on a calm day. Considering it's only 14 feet, it's adequate speed, I think. You can run this boat all day and spend less than 30 bucks on gas and that's the best part! -:)
Great review. Thank you sir..@@floridaoutdooradventures8981