Never heard of your channel before but I watched the whole video, and man you're a good drone pilot. Liked and subscribed too because I hope others will be able to see your videos.
I bought one months ago and its great, changed the camera because mine was before the pro model, just buy it if you consider doing so, nice little thing for noobs and pros build quality is fine, the electronic to, so far after hour's of flying still great and flies fine. original camera had a small FOV and a dull color, new one is Caddx ant
No it does not come with a controller, pretty much every drone is not going to come with a controller unless it is part of a kit which then it will be clearly obvious that it comes with a controller
Do you think the HDZero whoop VTX and nano camera would fit in here? A quiet 3" HD freestyle quad would be perfect for flying in walking distance of my house.
Haha thank you! The channel has been growing a ton in the past couple months and continues to grow pretty quickly. At the rate its going i'll be at 10k sometime next week!
This seems like a good option. Not totally what I want but so much cheaper than anything else :D Also is there any way to increase the max uptilt? Like carve out the top plate a bit more, or is the camera connector the problem? Then maybe drill out new holes or is it not possible? Also I'm (not yet) totally about freestyle but wanted a bit more of a cinematic (maybe LR) quad, is it possible to add a GPS, and maybe 850mah lipo and the thumb Pro, then it's probably not really freestyle capable anymore but so much better for filming, or is that a bad idea? Edit: I got it, it's fun! I already wrecked my thumb Pro tho. Now I'm just adding stuff like GPS, proper VTX and currently designing a holder for the GPS and probably an SMA antenna connector. Edit 2: I also found a way to get ~40° uptilt, you have get some spacers (
Nice flying dude! Subscribed! I'm probably going to snag one of these to upgrade myself over time. You can apparently fit a rush 600mw vtx in there and ratel nano camera according to one of the dudes in one of my groups and get much better video signal. I have the Tinyape Freestyle 2.5", it flies lovely, not long got myself some SKYZONE COBRA X V2 box goggles with a DVR so looking forward to recording some flights on that myself!! Just waiting on some replacement props lol.
Wow nice little drone. I am kind of new on this, I have a Goly Stone a d now I just purchased the Potensic ATOM se , but I didn't know of this tini drones. Does it comes with everything you need batteries etc? and I guess the flying distance is not much? thanks
usually quads like this don't come with batteries and everything you need, so you'll have to buy batteries, battery charger, props, etc. flight distance is pretty decent but you can upgrade your VTX on this I think. I hope you enjoy your Potensic Atom too!
Yes and no. Natively without accessories no. This drone uses an analog system witch a phone does not have the built in electronics for. Instead of googles you could get a reciver that outputs a hdmi signal that you can plug into a monitor. Or they make small 5 inch monitors that have this tech built it. Though tbh as someone who had to do this because when I started googles were new and expensive it’s really not great. Googles offer a much better and clear sight of what’s happening
hello, thank you for this video, the drone arrives not programmed, so I can't do anything at the moment because I can't get the program, I tried to get someone from the manufacturer, but no answer, I have several questions: how to do the programming? on what software? which compatible receivers? thanks in advance
Hi, I’m reaching out for assistance with my drone. While flying, it briefly touched the ground, and I thought it was just a minor incident, so I disarmed it. However, unexpectedly, it shot back up into the air for reasons I don’t understand, and then it crashed hard. Unfortunately, it’s now broken, the motor is like pushed down and I’m unsure how to repair it. I’d appreciate guidance on troubleshooting the issue and any recommendations for repair options. Thank you for your help!
Can the default camera be changed that comes with the drone? Also can you make a video on how to connect the transmitter and goggles with the drone ? i have fs i6 fight controller
Nice quad, but why was it designed to not allow ANY camera uptilt? To get even the smallest uptilt requires the top and bottom plates to be loosened, asjust the tilt, then re-tightened.
I'm new to FPV and I thought this was a good starter drone, does this come with a controller or fpv goggles? If not can you recommend anything, or at least a video on how to connect those to the drone. Very helpful video btw.
I have a TBS BlackSheep Nano, and I never use it because it takes me like 15 minutes to get it to bind... Can I snag the VTX off of it, transplant it into this, and have a much better experience? I should have done a bit more research before I bought it, I realize, it might be integrated into the board.
Unfortunately with the Blacksheep nano everything is built into one board, so you wont be able to take just the VTX or receiver from that drone and use it on another. A standard 20x20 VTX should fit this frame fine though 👍
Can someone tell me what all I need to get along with the Baby Ape? It's not very clear on any of the sites. First timer but have done plenty of car wiring mods so no problem working on it. Thanks
Hey, I m new to this channel never saw it before but you are a great pilot ! However, I have a small question. I m new to this hobby even tho I previously had tiny whoops. But next to the geprc phantom, which one is the best ?thank you so much !!
Do you need the receiver in it or will it work without it also I have analog video and the battery's in the description are out of stock are there any other kind of batteries that you would recommend
Hey i just found out about fpv drones and im looking to get one just for fun what reciever and controler did you use? my dad has DJI goggles laying around somewhere (idk if they will work though)
With this drone you'll need analog goggles, DJI goggles only work with DJI VTX's (Air unit, vista unit, O3 air unit) You can get a set of box goggles pretty cheap 👍
Controller will depend on what receiver you're using. here are some links to solid budget options you could use with this drone JumperRC T-Lite V2 ELRS - bit.ly/3cYJ7oS Eachine EV110 FPV Goggles - bit.ly/3B6Sjzz
Hello bro The only drone channel i support is you. Can you suggest some best receivers for elrs2.4 g/ frsky transmitter. I am thinking of sbus one. Which one u suggest.
I'm not sure it could handle that kind of weight haha. I'm in the middle of figuring out how to mount a naked gopro on it 😉 If everything works out i'll be publishing a video on it lol.
I love your videos found you like a week ago can you like make a 120-180$ drone build and that includes like every piece not like few before builds that needed 3d printed parts and like for this one.
@@TRONCATFPV Please include the goggles as well, I wanted to buy one but the goggle pricing made me pass. Even a cheap monitor/receiver combo would be great to start!
For a controller I love my radio sate rpocket ELRS. You can change it between mode two (right throttle)(default) and mode 1 (left throttle) by tightening or loosening some screws.
Never heard of your channel before but I watched the whole video, and man you're a good drone pilot. Liked and subscribed too because I hope others will be able to see your videos.
thank you! 🙌
I bought one months ago and its great, changed the camera because mine was before the pro model, just buy it if you consider doing so, nice little thing for noobs and pros
build quality is fine, the electronic to, so far after hour's of flying still great and flies fine. original camera had a small FOV and a dull color, new one is Caddx ant
Sorry for interrupting... U wrote that you bought it ... And is there a controller for it? Or how can i fly with that?
did it come with a controller?and is the throttle the left or right stick
No it does not come with a controller, pretty much every drone is not going to come with a controller unless it is part of a kit which then it will be clearly obvious that it comes with a controller
@@Mr.Thermistor7228can it connect to any controller or can you help me find the one?
wow, nice flying! I was just thinking of getting one, and the starter drone kit in the description looks like a good one for a noob like me.
Subscribed. Thank you for taking the time to make all of the great vids for us!
My pleasure! 🙌🙌
@@TRONCATFPV a
Well that was a unique mix of the harp and beats. 👍🏻 It nearly argues the beat but in the end blends.
Please keep up the amazing videos! Thank you
The best worthwhile purchase, great little drone and only £60
Do you think the HDZero whoop VTX and nano camera would fit in here? A quiet 3" HD freestyle quad would be perfect for flying in walking distance of my house.
Beautiful flying man !
Thank you for such a clean & informative review.
I wanna know why this channel only has 10K subs? You've been putting out great content fooooorever my dude.....is the algo hosing it up??
Haha thank you!
The channel has been growing a ton in the past couple months and continues to grow pretty quickly. At the rate its going i'll be at 10k sometime next week!
@@TRONCATFPV for sure...hopefully that jump from 10-20K will go quicker...same with the hop to 100k!! Keep the faith!
This seems like a good option. Not totally what I want but so much cheaper than anything else :D
Also is there any way to increase the max uptilt? Like carve out the top plate a bit more, or is the camera connector the problem? Then maybe drill out new holes or is it not possible? Also I'm (not yet) totally about freestyle but wanted a bit more of a cinematic (maybe LR) quad, is it possible to add a GPS, and maybe 850mah lipo and the thumb Pro, then it's probably not really freestyle capable anymore but so much better for filming, or is that a bad idea?
Edit: I got it, it's fun! I already wrecked my thumb Pro tho. Now I'm just adding stuff like GPS, proper VTX and currently designing a holder for the GPS and probably an SMA antenna connector.
Edit 2: I also found a way to get ~40° uptilt, you have get some spacers (
Nice flying dude! Subscribed!
I'm probably going to snag one of these to upgrade myself over time. You can apparently fit a rush 600mw vtx in there and ratel nano camera according to one of the dudes in one of my groups and get much better video signal. I have the Tinyape Freestyle 2.5", it flies lovely, not long got myself some SKYZONE COBRA X V2 box goggles with a DVR so looking forward to recording some flights on that myself!! Just waiting on some replacement props lol.
Wow nice little drone. I am kind of new on this, I have a Goly Stone a d now I just purchased the Potensic ATOM se , but I didn't know of this tini drones. Does it comes with everything you need batteries etc? and I guess the flying distance is not much? thanks
usually quads like this don't come with batteries and everything you need, so you'll have to buy batteries, battery charger, props, etc. flight distance is pretty decent but you can upgrade your VTX on this I think. I hope you enjoy your Potensic Atom too!
What goggles do you recomend
Although it's nice that all of the screws require the same tool it would be ice to see them use hex bolts instead of Philips
Agreed 100%
Philips always feels like Russian roulette to me. "Is today the day I strip this?" Everytime I fiddle with one.
Hey man! This is a sweet looking drone! Do you know if it could be connected to a phone or laptop to use instead of using goggles?
unless your phone had a vtx, no
Yes and no. Natively without accessories no. This drone uses an analog system witch a phone does not have the built in electronics for. Instead of googles you could get a reciver that outputs a hdmi signal that you can plug into a monitor. Or they make small 5 inch monitors that have this tech built it. Though tbh as someone who had to do this because when I started googles were new and expensive it’s really not great. Googles offer a much better and clear sight of what’s happening
Use goggles 100%! Otherwise I’m not sure you can say you fly “FPV”😅
You got a new sub..Great piloting n video bro!
Did fly sky controller work at the drone
hello, thank you for this video, the drone arrives not programmed, so I can't do anything at the moment because I can't get the program, I tried to get someone from the manufacturer, but no answer, I have several questions: how to do the programming? on what software? which compatible receivers? thanks in advance
Just recently discovered your channel and ngl i wanna fly a drone so bad
Would you be able to attach a mini GoPro, like the normal hero or the GoPro 11 min on to it without weighing it down?
Hi,
I’m reaching out for assistance with my drone. While flying, it briefly touched the ground, and I thought it was just a minor incident, so I disarmed it. However, unexpectedly, it shot back up into the air for reasons I don’t understand, and then it crashed hard.
Unfortunately, it’s now broken, the motor is like pushed down and I’m unsure how to repair it. I’d appreciate guidance on troubleshooting the issue and any recommendations for repair options.
Thank you for your help!
Can the default camera be changed that comes with the drone?
Also can you make a video on how to connect the transmitter and goggles with the drone ? i have fs i6 fight controller
If I just want to cruise what size battery do you recommend? Will going to do 2s much as well?
Hey man. Very nice video and flight skills. Does the image you see on the screen has the same quality of the recording one?
Thanks! And yes, the image is pretty much the same. May be a little higher quality in the goggles.
NGL, those motors seem a lil sketchy
Yeah
They look like something salvaged from e waste bin
The v2 isnt as bad
They are just not painted
The v2 is a lot better and is worth it ngl
Nice quad, but why was it designed to not allow ANY camera uptilt? To get even the smallest uptilt requires the top and bottom plates to be loosened, asjust the tilt, then re-tightened.
It is an interesting design. having the camera mounting holes 2mm forward would prevent this too lol
still current ? what about flying inside.
I'm new to FPV and I thought this was a good starter drone, does this come with a controller or fpv goggles? If not can you recommend anything, or at least a video on how to connect those to the drone. Very helpful video btw.
Its $90 you get the quad only 😂
There is an rtf all in one kit on the website. Good luck!
Hey bro whats the update?
How would you go about connecting the remote aswell as the headset to the drone?
Lost my Emax Tinyhawk 2 freestyle the first time I used it with goggles, still looking for it 😅
mine will be here soon. cant wait to have one i can go nuts with and not worry about breaking the bank when i break it lol
I have a TBS BlackSheep Nano, and I never use it because it takes me like 15 minutes to get it to bind... Can I snag the VTX off of it, transplant it into this, and have a much better experience? I should have done a bit more research before I bought it, I realize, it might be integrated into the board.
Unfortunately with the Blacksheep nano everything is built into one board, so you wont be able to take just the VTX or receiver from that drone and use it on another. A standard 20x20 VTX should fit this frame fine though 👍
how can i get a controller to it?
This is maybe a dumb question but how far can it go without losing connection
or how many channels should the trnsmitter have?
Hey, i am new to FPV drones and i was looking to get this drone can you recommend any goggles and controller please :)
Can someone tell me what all I need to get along with the Baby Ape? It's not very clear on any of the sites. First timer but have done plenty of car wiring mods so no problem working on it. Thanks
Can this be upgraded to digital like Runcam link wasp ?
Wow, what a drone, is the recording sped up?
do you think if works with 18650 battery
It might!
Can you connect DJI RC and head set to it
sadly not, this has no DJI Air Unit, and I don't know I'd it will fit the CADDX Vista.
Will my ovonic air 500 mAh 3s 35C 11.1V lipo work?
Do you know if the Emax headset would be compatible with this drone
Yup! it should work fine with this drone
Nice video bro keep this good work
Can i control babyape3 from mobile?
unfortunately this drone cannot be controlled via your phone
can we mount a DJI action 2 on this?
Can’t I get this model with out the fish eye lense?
any thoughts on an drone less than 150 for starting this hobby besides this
Where to buy a reciever?
So my question is if I don't have goggles how do I see the video how can I hook it up to my phone
great video! can it be flown in angle mode or only Acro mode?
Does the radiomastee pocket (m2) work with this drone? And what affordable goggles do you recommend? I am new. Please answer
elrs radio only works with elrs receiver and affordable goggles are eachine ev800d
sweet video this helped me out alot. liked and subbed, great work
glad the video helped!
which pad does the ibus wire go to on the flight controller
What battery is recommended, have some 3s hv 350's
Nice video... I just planned to buy this.
Finally I find video in 2022 1st budget drone video ❤️.
Is that a xt30 connector?
yeah, 2s-4s is XT30, and XT60 5s-6s
Hey, I m new to this channel never saw it before but you are a great pilot ! However, I have a small question. I m new to this hobby even tho I previously had tiny whoops. But next to the geprc phantom, which one is the best ?thank you so much !!
Thats a sweet little quad but the no name motors kind of threw me off as they look a bit cheap. Good vid tho!!
Do you need the receiver in it or will it work without it also I have analog video and the battery's in the description are out of stock are there any other kind of batteries that you would recommend
Can we use 18650 2s on this?
Can I get a a link for a receiver and controller for 60 bucks
Are you stating that this drone doesn't come with a reciever?
Do i need a reciever to fly??
Im a drone newbie
theres is a kit that comes with reciver and googles its about 340 usd
Hey i just found out about fpv drones and im looking to get one just for fun what reciever and controler did you use? my dad has DJI goggles laying around somewhere (idk if they will work though)
With this drone you'll need analog goggles, DJI goggles only work with DJI VTX's (Air unit, vista unit, O3 air unit)
You can get a set of box goggles pretty cheap 👍
Seems to fly pretty good! Nice video and review!
Which is the max altitude??
can we put a GoPro on it ?
no its not large enough to fit a gopro and it wouldn’t be able to take off or just fly very poorly
Watch the whole video, he clearly said it, you are better off getting a insta 360 go 2.
What is his speed?
loved this freestyle, im thinking of getting this one, but i have beta85 pro 2 and thinking is that going to be any different feeling from this
i also hafe the 85 and a very similar 3inch quad to this. They fly different. The 3inch is much more freestyle capable and is just faster.
@@haustiersteinfpv9181 thank, i actually wasnt waiting and already ordered baby ape to check it out haha
pls make video on Darwinfpv cineape
dope flying!
great video, would I be able to mount a gopro hero 8 black on this?
This could probably carry a naked GoPro but not a full sized gopro.
Oh you mean it has the same camera as my drone. 😉👍 I thought the camera view looked familiar.
yea buddy!
Friend I want to buy it, but my question is if it is compatible with dji fpv Goggles ?
This drone is not compatible with DJI goggles unfortunately
Gracias amigo
Im new to drone world, where's the controller and google? Where to buy it? And how to sync them?
Controller will depend on what receiver you're using. here are some links to solid budget options you could use with this drone
JumperRC T-Lite V2 ELRS - bit.ly/3cYJ7oS
Eachine EV110 FPV Goggles - bit.ly/3B6Sjzz
@@TRONCATFPV thank you!
I need this quad in my life
For the price its really not bad, I'm curious how the components will hold up over time
Hey man, just so you know your banggood link for the battery goes to a 4s version instead of the 3s version.
Thank you for bringing this to my attention, fixed the link!
Will this work with fatshark scout goggles?
yes this should work fine with those goggles 👍
@@TRONCATFPV thank you
I know im very late but is that camera Stock? I heard that those suck, or is it only The normal version?
The pro version comes with the caddix ant and a 200mw vtx. Very respectable budget camera
Hello bro
The only drone channel i support is you.
Can you suggest some best receivers for elrs2.4 g/ frsky transmitter. I am thinking of sbus one. Which one u suggest.
Where to buy
Hi, i have a question. How do you charge your batteries?
Battery charger
did someone tried to put a gopro session on it? or runcam orange?
I'm not sure it could handle that kind of weight haha. I'm in the middle of figuring out how to mount a naked gopro on it 😉
If everything works out i'll be publishing a video on it lol.
@@TRONCATFPV yeah same, not sure lol it will go in the air but im wondering how uncontrollable it will become :D
can you attack a gopro on the top?
maayyybeeee a naked gopro. Deff not a full sized GP though lol
What kind of battery you tink is better?
Gnb 550 3s
I love your videos found you like a week ago can you like make a 120-180$ drone build and that includes like every piece not like few before builds that needed 3d printed parts and like for this one.
I'll have another budget build video coming out in a couple months. Keep an eye out!
@@TRONCATFPV Please include the goggles as well, I wanted to buy one but the goggle pricing made me pass. Even a cheap monitor/receiver combo would be great to start!
Is it able to fly with action cam on it?
I bet this could carry a runcam thumb or maybe an insta360 go. Anything above that weight class it would struggle
@@TRONCATFPV okay, thanks for ur information
Does it come with fvp goggles?
nope
Tossed an edit on my comment. Thanks for the pin!
is it right throttle and whats a good controller
For a controller I love my radio sate rpocket ELRS. You can change it between mode two (right throttle)(default) and mode 1 (left throttle) by tightening or loosening some screws.
Nice ,,,
👍👍
can i put the go pro camera on top?
This drone could probably lift a naked GoPro.
Not a full sized one though. If it did you’d probably only get 45 seconds of flight time
swap all those screws out with titanium would shave quite a bit of weight
Does this work with any controller?
As long as you have a receiver that works with the controller yes!
will this bind to a d8 frsky ?
If you use a D8 receiver yes it will!
Does the controller go with it?
the controller is separate
I love this but I was trying to contact the sellers to make it a $90 bill
This or 220 s