ฝัง
- เผยแพร่เมื่อ 16 พ.ค. 2013
- *Thanks's TH-cam User: "fraviaseeker" for the information that helped make this video!*
Fix your weird Xbox rechargeable battery pack problems.
Remember
-Pins 2&4
-Pins 1&5 to Pins 2&6
Sorry about the audio, I had to turn down the volume as I maxed out the mic on my camera because I forgot to change a setting to fix that on the camera. - แนวปฏิบัติและการใช้ชีวิต
![CAMPปลิ้น | EP.79[1/2] แก๊งไทบ้านพาบุกเมืองบั้งไฟโก้ ยโสธรรรร!!!](http://i.ytimg.com/vi/Ldr3_fvTEXk/mqdefault.jpg)
*This battery reconditioning program exceeded my presumptions. It worked on any drill battery, several AA and AAA batteries, **batery.repair** and any camera battery. The steps are simple and the act itself is exciting to do. No matter what type of battery you`ve got, it is sure to function again!*
Making use of the th-cam.com/users/postUgkxcJ22tnHH9l1vjdIdEIG27iOG55P7LXI8 reconditioning plan, I just saved 2 auto batteries from being completely junked. The guides were very simple to follow. I wish I would have found this years ago! You may use the guide to recondition any battery type
I just threw mine on the floor and it started working 😂😂😂
same
No way
🤣🤣🤣🤣
Dude! Thank you! This totally worked for me, haha!
Haha 😅
My paper clip wasn't getting hot, and it still didn't work after 2 hours D:
*I have used this video about 4 times over the years and it keeps bringing my ancient battery pack back to life. Thanks!
It works! My paperclip didn't get hot because the battery was already totally empty, so it was enough to touch only 1-5 and 2-6
I seriously can't believe this worked, but it totally did (on the second attempt).
One thing the video isn't quite clear about is that you need to hold down the 1&5 and the 2&6 combo for bit longer (I did each combo for like 10 seconds).
Thank you!
my battery isn't heating up, I've read the comments and stuff and tried 2 and 4 and 2 and 5. Should i be concerned that its not heating or is it better? any help is appreciated
Awesome, my batteries were already dead to a point where it needed to be charged, so I just did the reset of the logic board. Slapped it in my controller hooked in the charge/play cord and the light turned red and now is charging. Thx so very much.
Bro you are the man. Im sure for the people who followed your steps and their controllers still arent working probably have some other issue because id did what you did and my controller works just fine now
Cheers!
I don't have a paperclip near me. Is it possible to use another metal source, like a cobber wire or small metal wires you use in small electronic circuits?
Note: discharge occurs between pins 2 and pin 5. *Warning* to anyone about to attempt this process! Release the paperclip every 2-3 seconds. If the battery has a charge the paperclip will become *very hot very quickly*. Use appropriate protection between the paperclip and your fingers. The battery will heat up as well and you can irreversibly damage the battery casing, or worse, cause the battery to burst into flames.
Worked like a charm. Thank you for the valuable info. If anyone is still having issues, pin #2 is positive and pin #5 is negative. Use an old phone charger and cut the end with wires exposed, red is positive and black is negative. Just like giving a dead cat battery a jump start. Hold them on the designated pins for a few moments and continue with this fix and all should work well. Thanks again bro!
So red on 2 and black on 5?
Works like a charm.What actually causes the problem in the first place because my battery work perfectly fine and then I didn't use it for a couple weeks and boom its shows green light but isn't charged.Thanks again
Worked for my Nyko charge packs, thanks man!
it was constant green light before i tried ur way and now no light after i put battery back and start charging and then after i tried that resetting logic again and again. i got green light for about 10 secs and no light again....my battery is only 2 month old .....
MrBigPlaya 6 Does this work? I have two battery’s and want to try this hack to get them working, I am scared of them blowing up.
i have same problem where the battery pack thing, is for the rechargeable station from NYKO....anyways so everytime i wanna play i turn on a controller and immediately it dies so i put it to charge but it says its fully charged....like it's green for a full charge But the controller just doesn't wanna work, I'm not sure at this point if its the controller or the battery, or possibly BOTH....anything i can do to fix this problem.🤔🤔🤔🤔
Any other ways to fix the battery? I tried the method it didnt help most other people said hut the 2-5 to drain it then 1-5 then 2-6 not 2-4 I tried them both but neither 2-4 or 2-5 heat up the metal or battery. It has a small bit of juice in it but when I plug it to the charger it turns green right away. Well a quick 1 second red then green.
I got a reading saying that 1.43 v when I connected 2&5 but when I connect 2&4 its nil please help me out
What kind of cable do i need the guy never told me bout the recharge controller I have a dead controller and I'm trying g to sync it
Worked for me too! Fantastic! I was fixin to spend another $30 for a couple more packs, and now I don't have too. Us old farts CAN learn new tricks.
The battery pack seems dead and its not old;the Controller will only work With the recharge cord.any suggestions?
followed your instructions but it dtill didn't work
when I plugged in the usb charging cable to the controller to.charge the battery the led light would flash up in green once, but very briefly... so I cleaned the contacts of the controller and the usb charging.cable for the wireless controller, and plugged it in.and out several times, and what do you know, the red led popped up and its now charging the battery!
Worked perfectly for me
Thank You!!
I over charged my rechargeable battery pack and as soon as I unplug it dies so I got two new battery packs and put those in plugged the charger in and the controller says its fully charged when you press the home button but when I unplug it dies right away so I thought it was just that controller but no I plugged both battery's in to the other controller but it doesn't work ether if you know what to do can you message me thanks
after i touch the contacts together how long should I hold the paper clip on it? you say i will feel it heat up but how long will it take? i've done it and held it there 10 or 15 seconds but never felt it heat up.
2 to 3 Seconds, after remove it, wait until it gets cold, and put it again
My empty battery pack was fully charged after 10min. and drained over the same period. But now, it still charging over 3 hours. Thank you mister !!! (Sorry for my english :)
Is there anyway to do it WITH OUT the charging cable
i tried that method and still no luck i got a ni-mh 4800mah brand new got it from amazon n wen i plug it in it wont turn on with my halo 4 remoter but it does turn on with my white remote n it just flashes n wen i sync it ti the system it wont connect what should i do send it bak or what
How long do you wait 'til the paper clip gets hot? It's not getting hot for me. I feel like I'm just scraping and scratching the gold plates on the battery pack =\
I've done your steps with the paperclip and all but it still does not work for me plz tell me whats wrong
Works. Thanks so much!
Does the charger light flash when it's fully dead?
what can you use
instead of a paperclip
Does this work with nyko battery packs?
For everyone that is having trouble with the paper clip getting hot, it worked for me when I connected 2 and 5 (instead of 2 and 4 as stated in the video). Try it that way to see if it works
Dude I love you are the best mine wasn't even charging until I did this thank you
Hey wat do i after i just seat it there?
Is ther a set time i need to hold them on that battery
That's not the problem with my controller what's going on is when my battery is fully charged it won't even turn on my controller at all it blinks barely few times and then it shuts off not even giving it a chance for it to turn on I have to use the charging cable to keep my controller on why is that
help,evrytime i charge it it becomes green then i take it out then its not turning on even tho i have a battery pack
does it work on all pc?
I was literally about to do this and suddenly the battery starts charging. Ah well.
the hero i still need every time i dig up my 360 controller for a game on pc that doesn't go well with keyboard and mouse.
can somebody help me just bought a battery today and its not working when charger is not connected and when connected the charging light is not switching on can somebody help me plz
Is the light on the battery charger supposed to blink
9 years ltr, this video just saved my money and my reputatio, well dome it works very well
Yoo guys i have a problem wich is when i connect the cable a green ligth appears and then goes away when a red light is suppose to show up i did this dont know if it actually worked but i tried cleaning or rubbing something on the 6 pattern and i notice they were a little dirty and made me think that was the reason why i was not sending electricity
just discharge it by running it dry within the controller then do 1-5 2-6 shorting a full li-ion batterey can be very dangerous.
thanks man!! my battery get a little sparkle and back work again nice
Can i do this without paper clips ?
Its pin 2 and 5 to discharge.
Didn't heat up but worked
Awesome
BRO this was the problem, if you're still alive thank you lmao
Mine wont discharge or reset.
tred several times and it wont do anything.
i even tried re-charging it on the dock and it charges fine, but the controller still wont turn on
I plug my Xbox 360 controller into the Xbox and it keeps flashing the green light on the charger and it won't charge the battery pack
I think it might actually be pins 2 and 5 to drain it
how long does it take to heat up
Huh, I tried this, but the clip isn't heating up at all...
Does that mean that the battery is done for?
same here
Cant you just put it.in the controller and keep turning it on till it wont give you a power light at all ,seems a safer method
I need help my rechargeable battery pack for xbox360 won't turn on
I had a deep discharged pack and to fix it I wired two paper clips between pin 2 and 2 (plus) and pin 5 and 5 (minus) of the dead (0.003V) and a fully charged (2.7V) battery pack and left it for about 30-60 seconds. After that I measured roughly 2.7V on the previously dead rechargeable and I could charge it again using the xbox charge station.
This needs to be at the top. This is the solution to a fully discharged battery pack. I had a pack that wouldn't turn red or green. I checked the voltage and got similar readings (0.003V on the dead, and 2.7V on the charged). I wired 2 to 2, and 5 to 5 for 30 seconds. The dead pack registered at 2.7V afterwards, and viola: it can charge again!! Now I'm wishing I hadn't thrown out 2 other dead packs that wouldn't charge with the method above.
+Felix Bünemann
Good advice! I had no fully charged battery packs left so instead a used an AA battery and two paperclips. Worked like a charm!
+Nick how did you put the "+" and "-" sides of the AA battery?
+Felix Bünemann DUDE YESSS thank you soo much! looked everywhere on how to fix a fully discharged battery! tried leaving it plugged in, wiring the terminals up to a charger everything but no luck then i saw your comment and now it works!
Works perfectly . You can also use a stabilized 3V Power Adapter with cable clips and do this . Measure polarity first though :)
Thanks really helped out a lot : - )
I dont have that..... so how can i fix it if it never looked like that :l
This method FAILED for me on 4 battery packs that haven't been used in
years. They also had very little use before putting them into storage.
They're completely dead now and I tried this method many, many times on
each of the batteries. I'm just going to use the regular battery covers
and get some good rechargeable AA batteries.
Does this solve the issue with the red light going from red green within 5 seconds of plug in (for re charge) ?
That's what it's supposed to do
this worked once for me.. lasted about 2 days of gameplay,but not it cant happen again :(
so does it mean this is only a one time thing?
Help me, why does my wire colour turn green and disconnect the controller instead of charging it?
Same thing is happening to me!!
Minds have like 6 burn marks on it and it doesn't recharge I think what you said first about my battery getting. Hot is what happen.One day I just left my battery on the charging station not the controller I came back it was dead and wouldn't recharge.
how long does it take?
I just fixed my pack by plugging/unplugging the charging cable several times over (10-15 times) and then leaving it plugged in for a bit. At first the red light came on after about a minute (where as before it was just a flash of green and then nothing), then it fully charged to green and works. I recommend trying this simple trick before attempting the battery discharging trick in the video.
this happens to me rn
So helpful! Thank you!
Mine stays on three bar even if its fully charged or low charge
That actually worked☺, thanks man
so my batteries are really dead they don't even last a second after I unplug. I am thinking on getting a new ones, I don't that much, what should I do to not kill the batteries again?
I think I'm running into the same situation. Unfortunately there is no way to really prevent this. Batteries do get old. I would be interested to see if the 3rd party Lithium Ion batteries are any better.
It works! Thank you so much.
Thank you so much for helping us for saving our batteries.
WTF, it actually worked!? OMG, Thank you !!!
Thanks that really helped!
It work, thanks youuu!
Mine wont stay in the controller
mine doesn't charge anymore... help?
Can you still hold the paper clip with glove since it gets hot
I wouldn't recommend it. You don't want the battery to overheat from discharging either. The indication that it is getting too hot is when the paperclip is too hot to hold.
Thanks it worked I am so grateful
Major Nelson on my hit list.
it still just goes green when i try to charge it.
no way it worked. No overheating att all just reseted it thanks man i like
Dnt have an paper clip but what kind of videos u shoot and how much your camera cost ....
I use the Canon T4i. It was about $650 at the time.
The procedure did not work on one battery pack that has died on me. The paper clip never got warm when shorting pins 2 and 4. The battery still had a little power on it because it could drive the control for 10 seconds after disconnecting the charger cable.
Any ideas what could I do apart from buying a new battery pack? Thanks.
I'm having the same problem. I plug my cord in after "shorting" my battery and then touch the correct pins as done in the video. I put my battery pack but in controller plug in cord. Acts like it's charging and the the light turns green. Indicating it's done charging
Found that that battery was completely dead. Bought a new battery and it is working well again. There is a point where you need power from the heavens to put a Lazarus resurrection into a very old battery pack ;)
Hahah, I just took the battery pack apart and uses the batteries that were in there. They worl fine they've lasted me a couple weeks now. It's kinda weird. Maybe it was my cord
It worked the first time I did it and then it happened again so I re did it. But won't recharge anymore
Would this help if the light doesn't even turn on on the charger my charger will have no light the home button would flash then stop
Your battery might be completely dead and just needs to be replaced.
Mine dosent work at all
your solution worked!!, I was just so frustrated by it, Thanks man
Thx man that works for me ;) good job ^ ^
Well whaddaya know, worked in 2022. Thanks maestro.
Such a beast!!!! It works
I love you it works
Thank you so much i need help with this
Thanks! It works!
Worked for me. Thanks
thanks this really helped