วีดีโอ

Bro. Get a camera stand. I’m Blair witch project nauseated now.

Stick with oem filters bought online for discount and picked up at the dealer only. If walk in to parts dept at dealer they mark up heavily. dont buy amazon ebay etc counterfeit

I'm a few seconds in an I like your humor. Good video. Just picked up a gokart with siezed motor i know i can fix it bc used to do it with boat motors all the time. I want see how you do it now. I used to leave red magic oil in the piston and it would do the trick lot of times with some brute force.

Just motivated me to try and do the same to a champion 212 I took off a go kart that’s seized the same way 😂😂

No way😂😂

You can roll new bearings in a 300 six with the engine in easy as pie I’ll show you how 4 or 2 wheel drive. Done way to many to count

I faced 4 Hyundai original filter failures Now I switched on to another third party manufacturer which is much better in reaching oil to tappets

Had the same issue!!! Mobil 1 oil filter suck!!!!

I have just put a timing chain on a jeep liberty V6 and oil and filter. After about 80 miles that I drove it, in about a week I started to here noise at startup. It became worse everytime at startup cold and then started when it was warm. I suspected the oil filter and I got a new one and installed it. After the first startup I never heard any noises. When I took a look at the filter I noticed the anti drain seal was deformed and with no significant force applied the filler guts I could see movement side to side. If I told the owner to take it before changing the filter, they definitely could have destroyed the engine and probably would blame me. A dam brand new car quest filter. That Ford engine was notorious for filter drain and it was always best to use by Motorcraft filters. How ever on my mustang , I used a small filter for pressure that took maybe one sec. That motor you have, you might want to install new rod bearings and mains while you are there. Those engines were built and lasted a 4-5 hundred thousand miles but the oil must be changed regularly or at best 2500 miles.

same, I am changing my oil and the filter is dry. it freaked me out that I went straight to TH-cam 😢😢😢

Get back at it bro, we need more videos.

Loved this series, as unfortunate as some things went for you. Glad you stuck it through and didn't give up on the truck, looks clean

that thing sounds mean! fuckin minty hot rod my friend👌👌💨

Did you put oil in it before installing the Mobile1 oil filter?

I think Mobil 1 should've steped up to the plate and replaced your engine out of their pocket and time. Just my opinion.

What kind of batteries did you use

nah, not washed. look at the bowl. The piston is hitting the head

Am suspecting my car with this oil filter, because,I get a small knock on timing chain, n the brand of oil filter isn't usually u use, because I keep smelling oil as rev up,it burns but oil is same level or at least no change, pcv valve got some oil in it

I can tell you watch trailer park boys!

I bought the wrong oil filter last night for my dodge caravan. I bought the filter for the 4.0 and I have a 3.3 some bitch

Isnt control valve upside DOWN? 🤔

if it has a water pump it should have exit water somewhere on it? Didn't see any? is it overheating?

What size ball hone?

I built a motorized bike for my buddy and as a cheap compression increase we deleted it 😂 6months daily driven to work and fishing says u don't need one 😉 he plans on paying for the head to be milled and the using a stock head gasket when it's been milled

Could have been a monay filter, someone forgot to install the check valve, all spin on filters have them.

Wtf😂??? Efi badge lol😅😂l

She sounds strong!

Question will the 6.9 interchange with 7.3 idi? I know the heads have differe t size bolts and 7.3 idi factory turbo motors have bigger risk pins....will all 7.3 idi parts fit in a 6.9 idi? Or vise versa? Also is there a manual to get all the torque specs??

If you think that’s a beast then you should drive a tuned p pump mechanical 12v cummins on 35psi

Look, if I want to see junk scattered all around the yard and someone using a oil can to keep the rain out of my welder, well...... I'll just open my backdoor. That's the kind of shit I do.

I got one of them motors thanks for video

I had a oil filter collapse on me @2500 miles after oil change , drove me crazy watching the oil pressure drop to 0 psi at Idle , no engine noise or ovrheating , replaced sending unit no change, people were telling me my bearings are probaly worn out along with the cam bearings, engine has 266000 miles and running strong what change all of a sudden? change oil and filter , no more problem

Hey bud I got a 93 7.3idi in a international bread truck. Has a bad head gasket I was told. Very hard to crank and will over heat if you run about two miles. Not mixing oil in water or smoking. I want to rebuild I need help I'm trying to find parts and need part numbers. I have a f350 7.3 idi and have worked on it but not a full rebuild.

😂😂lol

I changed my car’s filter the other day. It was a Bosch filter. When I finally got it loose. Nothing came out of the filter. Only like some at the bottom Will definitely check filter for sparkles. Car has been sitting for like 4 months.

Subbed&Liked!!! This channel desperately needs 'promosm'!!!

I've been running Fram for 270,000 miles, last time I used a $10 filter and now I'm using a quart every 40 miles!

You should straight pipe that fuckin thing lmao

you have an interesting channel man i sub'd

How did that run with a bad coil?

Nice rebuild. This is a newer series with the aluminum block, I believe. These are very expensive and they last a long time. I have a Hatz z790. The quality is very impressive. I think mine weighs about the same as a SBC, but the block is iron. These are excellent choices for a serious generator that needs to run a long time.

Not a fan of all the cussing....

Some days I feel like doing this, I don’t rev engines that fast while cold unless I’m very frustrated with the engine.

love IDIs you should upload more videos. Dyno it lol

I just learn from your mistake!!! I’m rebuilding my 7.3 out of my 88 ford rolle bed and I don’t want this to happen! Happy thanksgiving!!!

Solid work! Did you use a Comp Cams crankshaft socket for your degree wheel or did you fabri-cobble something?

Love the videos. They are very helpful. You have inspired me to build my own idi. 93’ F350 4x4 5 speed dually

At the end of the video it sounded better, cool!

I was expecting a better 3 cylinder roar on that engine, haha.

This is a grea video for promoting environmental friendliness. Oil really does need to be disposed of properly, good job on the upload. 1st comment 6th like YAY!