วีดีโอ

@@ines3995 hello. What can I do for you? Yours is diesel? What country do you live in?

great questions. You saw the damage when I put the wrap on top of the primer correct? you can clear the primer but then you are making more work for yourself after. A few TH-camrs wrap over the primer and it looks good then falls off a few months later. Those are fake wrappers. I would do all the body work and at least hit it with the cheapest paint available like I did. I had extra black so I did that and the car is 3 years wrapped and NO PROBLEMS.

@@rollin18wheels what state are you located in and is radiator and ac included? Total front or just body?

@disturbingkreationz NC and I just need the front end sans engine. My truck is mechanically fine other than the radiator and possibly the condenser coil. As far as I can see the oil cooler is no worse for wear and even the fan clutch is fine despite being on the wrong side of the radiator. If the fuckface insurance estimator would stop fiddle fucking around and get the estimate done, I would know more than what I can see without opening it up

@@steveschneider7292 you don’t loosen it. You push or pull a small amount and it will actually move. The bolt on the pulley not the bolt that locks the holder to the engine block. Did it work mate?

@ I got it. It was a success. Thanks!

@@steveschneider7292 great question you have to put pressure on the belt tensioner. There is a pulley that is spring loaded. If you put a wrench on that pulley it moves a couple inches to loosen the belt. Did this help?

You have so many good ideas.

@@skartv3374 thank you for watching and commenting. We have a lot of Audi videos. Subscribe and ask any questions if you need help.

@@MagicMikesDetailing I cleaned the window with car wash and then dried it. Then went to this. Care to educate me on APC? Not my profession.

@ sorry wasn’t trying to come off rude…APC (all purpose cleaner).

I didnt think you were rude mate. I just didnt know the abreviation. Yes I did clean the window very well. I also have a seperate video on how to clean that green mildew from the top and it came out great.

@@johnmedina8323 ya know I gutted it and then left it for a year. I just installed a car lift and build a shop truck. We are remodeling the shop and this spring we are turning the bus into a RV.

@ that sounds great. I just built one very similar into a Food Truck!

@ any tips on where I can get new mirrors for it

I wish you would have posted some videos so I can get ideas. I don't know if I am going to do mirrors or cheap cameras and a monitor to display right side, left side, rear and rear top angle

@@shawnsharma3364 thank you for commenting! Subscribe to help the channel and ask or comment any time.

@@Foralluhaterz Tyson kept bitting his gloves to make him hold back and not knock Jake Paul out.

@@disturbingkreationz exactly, clearly rigged but many blaming age. Age did not hold him back from even throwing

Tyson wanted to KO him but wasn't allowed so he kept bitting his glove.

@@kacklehorn yup.

I love your channel. you are so talented. lol

@@woodbutcher3121 nah mate. I put the jack on the frame in the front as close to the wheel as I could. It lifted the vehicle like 1”. It was super tight but when I got the bolt to the fender I used an open ended wrench and made small turns to get it past the fender and then it just slide out. Try it before you give up and let us know.

@@woodbutcher3121 if you really need too you can drop the main cross member with suspension like an 1” to get some room.

@@NewYorkFloridaMan they paid Tyson off

@@jacubzayzay9777 totally rigged

@@nathanbrewer408 was staged

@@William-p9b amen

@@JcPack totally

@@CrazyAspyKid exactly

@@delacruz2501 umm depending on the machine. I single back post is light compared to my : post with 2 extra arms for low profile tires they are actually both super heavy for me by myself. lol

@@fatbratwurst6163 see if you can get to where the actual bumper is installed and take it off with the bumper. You are going to have to extract those busted bolts.

How can I show using it if it is a POS and broke the first time I tried? LMAO. Your videos are so much better.

Us too!

@@geromelenord4675 great question. I wrapped 3/4 of the bumper installed only with the bumper bolts to hold it in place. Then I took it off to take out all the small circle sensors and wrap each one.

@@gordonburchell4337 great comment and thanks for watching. Did you ever find the tip or decided it was too much hassle?

I need to change my converter

@@jaimenkillian6784 ok what would you like to know? You have to pull the trans for that.

@@frankrizzo6507 appreciate the comment and doing things differently. Not everyone can do that so I was giving them a second choice. Hope that’s ok.