วีดีโอ

Lolol super quality guy, the gaskets aren't even the metal style

Excellent!

Cool getting ready to do my. G2 85 MODEL. THANKS

Bless you for this video

All that work for nothing lol

What was the torq spec for the intake and the plenum?

1 yr later how does it do ?

The best in Florida... Your dad is the guru of fencing

Great video and you know your stuff, But i need to say one thing, If that was my car you were working on i hope there would be blanket covers on sides and front to protect my paint job from all the stuff you put on the car especially the front, Anything can scratch or drop. Most mechanics dont take the time to cover or be careful on doing there work, I am OCD, I know every mark on my car and sound. I just got my exhaust catalytic pipe fixed twice and still there is a slight noise that I have never heard before until they worked on it. I assure you it was never ever there until they worked on it....They deny it of coarse as usual.... I hate mechanics cause i deal with alot of crap not getting good work or admitting that they did something to my car thats not right,,, It sucks!!!!!!!!!!!!!!!!!!!!!!!

Take the studs and Video back to the Wally's Manager.Get payment for them and your time. Thanks for showing the studs can be replaced without the axle removal.Yikes. Happy Freedom Day Everyone !

i just replaced the steering rack and noisy power steering pump and lines on my daughters 07 gp sc series 3 135k miles, then found out it was the int steering shaft causing all the play... replaced that all good. also you may be doing a timing cover gasket on that soon. had to do that job a couple years ago for a coolant leak replaced water pump too on that job. then i had to replace a leaky heater core 2 years later, decided to replace the radiater too and hoses to keep the system clean and cool. now everything has been good, but starting to get lifter tap when cold and a very very slow coolant leak or burn. may be doing lim gasket and lefters here soon.. love these old 3.8 motors

What state are you located in? Love how you got the pan off!

Did this process to my 2018 equinox. Brakes went out and went stiff. Had to removed valve cover and clear debris from vacuum pump. Put everything back together with new vacuum pump. It’s not turning over. There’s power, the engine is cranking, spark plugs are not flooded, spark plugs have spark and fuel is definitely going to engine. It just keeps cranking but not turning on. Also tried attaching a booster pack to battery. The dash states “low engine power”. Any advice?

That sounds great....❤

Thanks for a great video. I am getting ready to finish my 1998 Olds Intrigue , it has been sitting for too long. Memory needs to be picked and refreshed...

Seeing that scale in the port...FLUSH with acetone. Please.The little leak isn't the heat, it's the scale in the block from overheating several times.Thanks for the info on the engine mounts.It sucks 2 diff shops can't give parts that fit same design.

Nice work! You should share this at Buggies Gone Wild golf cart forum.

I don't understand why you're taking so much apart just to change the kingpins

Very nice T bird! I had a '64 for several years I loved driving it. I now have a '65 that needs restoration. My charging system doesn't work either. The Birds nest in Portland Oregon has tons of parts. Best of luck and God bless.

Glad to see someone is still actually driving and taking good care of this vehicle. I have two myself in great condition and I make sure I keep em in tip top condition.. One of my 97(the one in profile pic) Vics unfortunately is undergoing surgery 😢 Doing head gaskets, timing, valve covers, intake manifold, water pump hose, oil filter housing gasket, oil pan gasket, new exhaust and radiator. I hit the sub button, looking forward to watching you tinker 😎

How did you enjoy this tool belt? I want to buy one but am uncertain, as there are no stores where I live that sell this company's products.

Awesome information.TY. I've been looking at Crown Vics and the Cop cars especially. Now I can replay this is I ever need to do that stuff.

I'm going to try this on my 1996 Town Car. Its got 234,000 miles with this rotten hose. As soon as I've got some time off from work I'm going to do this. I was wondering if it would be possible to replace that steel tube with all hose. Thank you for showing that it is possible.

Can that make your car not to start

Grate video... I have one yest like this one and is liking oil from the top part of the motor do you have n idea wher from this cars lik from? thank you.

covers. rub down the blue, ruff. then the paint wont flow off as much.. ford script.. try painting a small polly pipe, roll it across few times.. paint transfer, & its dissimilar metals.. i piant ,greese, oil, never sieze, everything i put back. depending on part.. that 302 is blue painted & balanced.. lol..

if you do go 460, or little 302, id get the nv4500 box.. 1200 re coed..

cheap power.. 460 , ditch the fuel inject. heads are good, or, alloy heads decent cam, flat tops. 500 mustangs easy.. cheap..they do 7000 revs std, no probs.. canted valves, no adjust rockers, big valves, ins, outs, all the sht chev dont have.. even the LS chunk,. LS, look like an updated FE. shows how far behind chev are.. ausie.. if you watch our bathurst, with holdens, cough, chev, winning, its because they cheat & use ford parts..

slightly different application, yeh,, bin..

mighta saved time looking for a decent set on ytub.. if your on ''social media'', id be posting, dont buy cloyes.. crap.. ausie.. i didnt think they still used assist, p/s, after the 70,s. we got nothing here in aus.. basic crap..

i think this n that garage,? or other vid,, replaced timing gear, . the new one was as slack as the old one. cant remember brand, but he got another..

just sold, bronco, 82, oil pressure nearly zero when hot idle. mates was same, replaced oil pump, no probs.. clevo. 351..

It looks good.Glad you caught the chain before stuff really went wild inside too.

Changed the pump and it makes vacuum(confirmed after starting it up again) I smelled gas and realized there is now a fuel leak coming from what looks to be the two left fuel injectors. Rewatched the video and tended to the O-rings that you mentions and stuck them back onto the injectors but it still leaks. Any ideas?

Mueves mucho la camara

I made sure each side of the clip was out of the rubber groove and just pulled up with pliers. Removed all clips in 5 minutes.

Yea the timing is off thts y it did tht... the metric mark and the reluctor on the camshaft is out of timing supposed to be at 12 o'clock u can see tht whn u lift up the valve cover

Where is the large spring? Mine has a large spring in the back

That looked sort of fun. That was pretty kewl of the boss and his son to help you at home.Like you said,that's Allot of digging you didn't have to do and the tree looks Heavy as heck.The kicker is the sunset scenery at the end too.

Very valuable cheap and dirty fix if you have this problem. Saves removing the intake manifold, which is a big job. Thanks.

Man, it was our pleasure helping you. We had a great time and to show people or put it in prospective them roots we pulled out where the size of grapefruits in thickness

How often does the vacuum pump break the cam ?

This is a Series 3 L26 Naturally Aspirated engine. L36 is Series 2 Naturally Aspirated. L67 is Series 2 Supercharged. L32 is Series 3 Supercharged.

Maaaaannnn.... my 19 equinox is gonna have some clean valves soon!!!. THANK you so much for showing me it's not that bad to get to the valves on this engine! Gonna get some valve cleaner and scrub with some plastic bristles and spray it out with air hose!

Couldn't see the actual assembly (up close ) No close ups😢

That's weird of YT,but they do weird Allot.I hit 'Thumbs Up' and it lit but shows 0 still.Huh. I see afterwards, that there's a couple of your vids I've missed. It's late o'clock so they'll wait. That is 1 solid blazer.Lucky you. In MI. they're all 1/3 rusted away at least.I don't think you'll have too much trouble finding a throttle body injection unit,but if you do I've seen 2-barrel carbs put on a regular intake.Danged if I know it's displacement but it was in the truck version of that.Shade tree fix it man did his last summer with a fuel pressure regulator to return the excess.Good luck.

Did this in my series 3 about 2 years ago. It was an ok job

You're an Excellent teacher!!!

That is what I did to my 71 ford f100 truck it works great 👍

Noticed you drove it in the first drive position small dot, that doesn't select 1st gear. Apparently for icey conditions